• Journal of Korean Society for Geospatial Information Science
• /
• v.18 no.4
• /
• pp.21-30
• /
• 2010

In this paper, the parallel distributed rainfall runoff model(K-DRUM) using MPI(Message Passing Interface) technique was developed to solve the problem of calculation time as it is one of the demerits of the distributed model for performing physical and complicated numerical calculations for large scale watersheds. The K-DRUM model which is based on GIS can simulate temporal and spatial distribution of surface flow and sub-surface flow during flood period, and input parameters of ASCII format as pre-process can be extracted using ArcView. The comparison studies were performed with various domain divisions in Namgang Dam watershed in case of typoon 'Ewiniar' at 2006. The numerical simulation using the cluster system was performed to check a parallelization effectiveness increasing the domain divisions from 1 to 25. As a result, the computer memory size reduced and the calculation time was decreased with increase of divided domains. And also, the tool was suggested in order to decreasing the discharge error on each domain connections. The result shows that the calculation and communication times in each domain have to repeats three times at each time steps in order to minimization of discharge error.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.22 no.2
• /
• pp.33-39
• /
• 2021

As the interest and demand in the recycled yarn field has increased rapidly worldwide, domestic companies are also promoting research and development and business on recycled yarn. The chemical and thermal properties of four types of virgin and recycled PET samples from A and B company, which are the leading domestic companies in the recycled polyester yarn business, were confirmed through infrared (FT-IR) spectroscopy and differential scanning calorimetry (DSC). Virgin and recycled PET from two companies were compared. FT-IR spectroscopy revealed the typical spectra of PET for both companies and a different peak at 872 cm-1. DSC confirmed that the melting point and crystallization temperature of recycled PET were lower than those of virgin PET. These results indicate that small amounts of contaminants are an important parameter affecting the thermal properties of recycled PET. In the DSC results after seven repeats of the heating and cooling processes, all four samples showed that a lower melting point, crystallization temperature, and low heat flow intensity increased with increasing number of cycles. The results of melting and crystallization enthalpy also showed similar patterns.

• Journal of Platform Technology
• /
• v.10 no.2
• /
• pp.10-19
• /
• 2022

Moving assistant devices for people who are difficult to move are becoming electric-powered and automated. These moving assistant devices are not suitable for moving stairs at which the height between floor surfaces is different because these devices are designed and manufactured for flatland moving. An electric-powered and automated moving assistant device should change direction or stop when it approaches stairs in a movement direction. If the user or automatic control system does not change direction or stop in time, a moving assistant device can roll over or collide with stairs. In this paper, we propose a stairs detection method by using oblique distance measured by one sensor tilted to flatland. The method proposed in this paper can detect upward or downward stairs by using a difference between a predicted and measured oblique distance in considering a tilted angle of a sensor for measuring an oblique distance and installation height of the sensor on a moving object. Before the device enters a stairs region, if our proposed method provides information about detected stairs to a device's controller, the controller can do adequate action to avoid the accident.

• Journal of Korea Water Resources Association
• /
• v.37 no.12
• /
• pp.1019-1032
• /
• 2004

Flood frequency estimate is an essential index for determining the scale of small and middle hydraulic structure. However, this flood quantity could not be estimated directly for practical design purpose due to the lack of available flood data, and indirect method like design rainfall-runoff method have been used for the estimation of design flood. To give the good explain for design flood estimates, regional flood frequency analysis was performed by flood index method in this study. First, annual maximum series were constructed by using the collected data which covers from Japanese imperialism period to 1999. Wakeby distribution recommended by WMO(1989) was used for regional flood frequency analysis and L-moment method by Hosking (1990) was used for parameter estimation. For the homogeneity of region, the discordance and heterogeneity test by Hosking and Wallis(1993) was carried for 4 major watersheds in Korea. Physical independent variable correlated with index flood was watershed area. The relationship between specific discharge and watershed area showed a type of power function, i.e. the specific discharge decreases as watershed area increases. So flood quantity according to watershed area and return period was presented for each watershed(Han rivet, Nakdong river, Geum river and Youngsan/Seomjin river) by using this relation type. This result was also compared with the result of point frequency analysis and its regionalization. It was shown that the dam construction couldn't largely affect the variation of peak flood. The property of this study was also examined by comparison with previous studies.

• Asia-Pacific Journal of Business Venturing and Entrepreneurship
• /
• v.11 no.4
• /
• pp.71-78
• /
• 2016

Religion can affect on every day lives of individuals in society. Also, religion can affect on personal networks and the formation of a social culture that may lead to influence individual decision makers. Religion can influence values and ethics of people in society. However, according to the secularization hypothesis, as an economy becomes more efficient and the members of a society becomes more educated, the influence and control of religion over people tend to become diminished more. How is religion related with entrepreneurship? There are not so many empirical studies that examine relationship between religion and entrepreneurship. The purpose of this article is that we empirically examine how religious commitment, in addition to individual traits such as need for achievement, perceived creativity, problem solving ability and entrepreneurial parents or friends. Our study is based on survey sample of 229 college students in Korea. The results we found are as follows. First, religious commitment does not have effect on entrepreneurial intention. Also, religion commitment has no relationship with need for achievement, perceived creativity, problem solving ability, and entrepreneurial parents or friends. Second, consistent with previous studies, need for achievement and entrepreneurial parents or friends have meaningful effect on entrepreneurial intention. Third, perceived creativity is a full mediation variable between need for achievement and entrepreneurial intention.

• Journal of the Korean Society of Earth Science Education
• /
• v.11 no.1
• /
• pp.21-37
• /
• 2018

The purpose of the study is to visualize the concept of water circulation in elementary school students through science behavioral system. Elementary school students found it difficult to understand concepts related to the water cycle. Most of the elementary school children think it rains because the clouds are heavier. It is most difficult to explain invisible concepts to elementary school children. Also, experiments in current textbooks are likely to disrupt scientific concepts. Accordingly, conventional water cycle, dew, fog, and cloud experiments were integrated into one system. The researchers then developed a device that allowed students to see the water's circulation at a glance. It is intended to enable integrated thinking on evaporation, condensation and precipitation. In addition, a instruction program to guide students using the system has been developed to demonstrate its effectiveness. Employing a quasi-experimental design, the participants were measured on their concepts of evaporation, condensation, and water circulation before and after participation. The findings indicated that the experiment is more effective in changing the concepts of evaporation, condensation, and water circulation than in previous experiments. Also, the optimal conditions for making use of the device were found, and there were no various experimental parameters, such as condensation.

• Environmental and Resource Economics Review
• /
• v.29 no.3
• /
• pp.363-388
• /
• 2020

The purposes of this study are to not only estimate optimal harvests and efforts using the surplus production methods for Spanish mackerel caught by multiple fishing gears, but provide dynamic optimal fisheries management for these gears using the current value Hamiltonian method. To achieve the above purposes this study uses several models such as Gavaris's general linear model for standardizing fishing efforts, surplus production method for estimating biological and technological coefficients, current value Hamiltonian method for estimating dynamic optimal harvest and efforts, and sensitivity analysis for diagnosing economic influences of these fisheries. As a result, this study showed that Spanish mackerel was overfished by multiple fishing gears based on surplus production method and the current value Hamiltonian method. Also, this study found that when the price and cost proportionally changed, the optimal harvest and fishing effort sensitively responded to the stock level of Spanish mackerel. Next, this study suggested that the multiple fishing gears for Spanish mackerel should reduce unnecessary costs such as operating time or inefficient fuel consumption. Finally, this study provided reasons Spanish mackerel should be included in the TAC system in a view of profit maximization based on sustainable use of the Spanish mackerel.

• Korean Journal of Food Science and Technology
• /
• v.31 no.4
• /
• pp.1011-1016
• /
• 1999

This study was performed to search a physical method having high yield and quality and minimum environmental pollution for extraction of pectin from apple pomace. Based on the physical solubilization of plant cell wall under the condition of high temperature, pressure and shearing stress, apple pomace was treated by a corotating intermeshing type twin-screw extruder with the diameter-to-length ratio of 1/20. The specific mechanical energy of extruder was introduced as system parameter for extrusion process modeling and the shaft speed, feed rate and moisture content as process variables. The yield, average molecular weight and galacturonic acid content of water-soluble polysaccharides obtained by extrusion were, respectively, modeled with the linear functions of the system parameter which was of the form as a linear function of process variables. The specific mechanical energy increased with increase of shaft speed and with decrease of feed rate and moisture content. Out of process variables, moisture content had the greatest effect on specific mechanical energy. The yield increased with increase of specific mechanical energy while the average molecular weight and galacturonic acid content increased with its decrease. In aspects of yield and quality of pectin, the results from this study showed the possibility to replace a traditional acidic method with the extrusion treatment of this study.

• Journal of the Korean Geographical Society
• /
• v.39 no.6 s.105
• /
• pp.907-921
• /
• 2004

Lots of characteristics such as dwelling, neighborhood, and accessibility characteristics affect to the housevalue. Many researches have been done to identify values of each characteristic using hedonic technique. However, there is a limit to identify interaction of each characteristic and variation of each characteristic among the accessibility context. This paper has implemented the Expansion Method research paradigm to model the housevalue determination process in the city of Seoul. The findings of this paper have revealed the presence of contextual variations in the housevalue determination process. The initial model for housevalue reveals that as $F_1$ increases (i.e., larger the number of rooms/bathrooms, larger parking space) and/or $F_2$ increases (i.e., higher owner occupied housing units, higher apartment housing units) and/or $F_3$ increases, (i.e., higher the ratio of higher than college graduated households, 8 school zone, older housing units) the estimated housevalue increases. However, the above relationships drift across their respective contexts. The houses which have negative $F_1$ value, the housevalue does not fluctuate according to the distance to the city center or subcenters. However, the houses which have positive $F_1$ value, the closer to the subcenters or shorter to the river, the higher the estimated housevalues. On the other hand, in areas far from the subcenters, the estimated housevalues does not fluctuate much according to the corresponding $F_2$ level. In areas close to the subcenters, the estimated housevalues vary tremendously according to the $F_2$ value. In the residual analysis, it is revealed that large apartment which are located in Kangnam, IchongDong, MokDong are underestimated. This paper has contributed to our understanding of the housevalue determination process by providing an alternative conceptualization to the traditional approach.

• Journal of Korea Water Resources Association
• /
• v.51 no.9
• /
• pp.747-759
• /
• 2018

Multivariate regional frequency analysis has advantages of regional and multivariate framework as adopting a large number of regional dataset and modeling phenomena that cannot be considered in the univariate frequency analysis. To the best of our knowledge, the multivariate regional frequency analysis has not been employed for hydrological variables in South Korea. Applicability of the multivariate regional frequency analysis should be investigated for the hydrological variable in South Korea in order to improve our capacity to model the hydrological variables. The current study focused on estimating parameters of regional copula and regional marginal models, selecting the most appropriate distribution models, and estimating regional multivariate growth curve in the multivariate regional frequency analysis. Annual maximum rainfall and duration data observed at 71 stations were used for the analysis. The results of the current study indicate that Frank and Gumbel copula models were selected as the most appropriate regional copula models for the employed regions. Several distributions, e.g. Gumbel and log-normal, were the representative regional marginal models. Based on relative root mean square error of the quantile growth curves, the multivariate regional frequency analysis provided more stable and accurate quantiles than the multivariate at-site frequency analysis, especially for long return periods. Application of regional frequency analysis in bivariate rainfall-duration analysis can provide more stable quantile estimation for hydraulic infrastructure design criteria and accurate modelling of rainfall-duration relationship.