• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.42 no.4 s.334
• /
• pp.7-14
• /
• 2005

Earlier researches have typically concentrated on discovering IP network topology, which implies that the connectivity of all Ethernet devices is ignored. But automatic discovery of Physical topology Plays a crucial role in enhancing the manageability of modem Metro Ethernet mesh networks due to the benefits of Ethernet services, including: Ease of use, Cost Effectiveness and flexibility. Because of proprietary solutions targeting specific product families and related algorithm which depends on Layer 2 forwarding table information it is impossible to discover physical topology in the Ethernet mesh networks. To cope with these shortcomings, in this paper we propose a novel and practical algorithmic solution that can discover accurate physical topology in the Ethernet mesh networks. Our algorithm divides the Ethernet mesh networks into bridged networks and host networks and those bridges located in boundary are named edge bridges. Our algorithm uses the standard spanning tree protocol MIB information for the bridged networks and uses the standard Layer 2 forwarding table MIB information for the host networks. As using the standard MIB information to discover physical topology we can offer interoperability guarantee in the Ethernet mesh networks composed of the various vendors' products.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.257-258
• /
• 2015

전력 계통은 전력을 목적지로 전송한다는 관점에서 하나의 그래프로 볼 수 있다. 그래프를 형성함에 있어서 목적에 따라 어떠한 구성으로 이루어지는지 달라지기 때문에 전력 계통의 토폴로지(topology) 분석이 필요하다. 실제 전력 계통망의 연결 구조를 보면 노드(node)와 링크(link)의 관점에서 해석이 가능하다. 예를 들어 모선, 발전소, 변전소 등을 하나의 노드로 서로 간에 연결 된 선로들을 링크로 볼 수 있다. 따라서 이러한 그래프 모델을 적용해서 전력망을 해석하고 토폴로지 특성을 분석할 수 있다. 본 연구는 미국 송전망과 국내 송전망의 실제 데이터를 이용하여 토폴로지 특성을 비교 분석한다.

• The Journal of the Korea Contents Association
• /
• v.7 no.5
• /
• pp.1-9
• /
• 2007

Topology information can be constructed hierarchically in the networks and the process of aggregating topology information is known as TA(Topology Aggregation). It is very important for scalability in networks. In paticular, routing and TA algorithm are very much elements on networks performance in private networks to networks interface. Therefore, in this paper, we designed and implemented routing simulator for TA in private networks to networks interface. And we evaluated and analyzed the existent TA algorithm using the implemented simulator. The implemented simulator can be used valuably to developing TA algorithm.

• Proceedings of the Korea Contents Association Conference
• /
• 2006.05a
• /
• pp.411-414
• /
• 2006

Topology information can be aggregated in the network constructed hierarchically and aggregating topology information is known as TA(Topology Aggregation) and TA is very important for scalability in networks. It is a very important elements to extend networks and routing in networks. In paticular, routing and TA algorithm are much influence on networks performance in PNNI. Therefore, in this paper, we design and implement routing simulator for TA in PNNI.

• Convergence Security Journal
• /
• v.8 no.2
• /
• pp.95-102
• /
• 2008

In this paper, we proposed topology aggregation method that efficiently aggregating topology information in simple node topology. And, it improved QoS of networks by improving call success rate and call access time. Proposed method can improving performance of network by decreasing aggregation information and aggregating multi-links information between boundary nodes using the line segment scheme within bandwidth and delay parameter. To evaluate performance of the proposed scheme, we compare/analyze the current method with the proposed scheme in respect to call success rate, access time.

• Proceedings of the Korean Information Science Society Conference
• /
• 2004.10c
• /
• pp.217-219
• /
• 2004

이동 Ad-hoc 네트워크(MANET) 환경은 기존의 서버/클라이언트 구조인 유선 네트워크와 달리 이동 노드만으로 구성된 네트워크로서, 노드들의 이동이 빈번하게 발생하는 매우 동적인 특성을 가지고 있다. 따라서 서버의 도움 없이 노드들 스스로 네트워크 토폴로지를 효과적으로 구성하고 이를 적절히 유지하는 기법이 요구된다. 본 논문에서는 메모리, 프로세싱, 베터리와 같은 노드 정보와 가용 대역폭, 서비스중인 노드의 수와 같은 네트워크 정보를 이용하어 적응적으로 네트워크 토폴로지를 구성하는 기법을 제시한다. 이 기법은 새로운 노드의 네트워크 참여 여부를 결정하는 토폴로지 디스커버리와 기존 노드의 탈퇴 및 위지 이동 등과 같은 상황에 적응적으로 대처하는 토폴로지 유지 기법으로 구성된다. 또한 기간망에 연결되지 않는 독립 Ad-hoc 네트워크와 기간망에 연결되는 통합 Ad-hoc 네트워크 간의 빠른 전환을 위한 네트워크 설정 자가 구성기법을 제시한다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.12
• /
• pp.98-106
• /
• 2013

The duty-cycle synchronization among mobile sensor nodes with energy-harvesting is very important. The nodes should keep their duty-cycle same to others as much as possible because they have to cooperate each other and to consume energy efficiently. The distribution of node position in network affects not only node connectivity but also the active time of synchronized nodes, and it relates to network life-time finally. In this paper, we introduce a network topology change algorithm (TCA) for energy-harvesting mobile sensor networks based on self-synchronized duty-cycling. The algorithm tries to change a network topology into a balanced topology where the mobile sensor nodes are unified according to the density of the number of nodes. For TCA, both fluid flow algorithm and flock dispersion algorithm are proposed and they are evaluated through the simulation in agent based modeling language. TCA is applied to the energy-harvesting mobile sensor networks to improve the synchronization of duty-cycle and to reduce the variation of energy consumption among nodes.

• The Journal of the Korea Contents Association
• /
• v.8 no.7
• /
• pp.35-42
• /
• 2008

The proposed scheme in this paper can search multi-links efficiently using the depth priority method based on hop count instead of searching the all links. To do this, we proposed a modified line segment scheme using two line segment method. The scheme represents two points which consist of delay-bandwidth pair to reduce topology information and provide a flexibility to the multiple-links aggregation. And we apply it to current spanning tree topology aggregation. To evaluate performance of the proposed scheme, we compare/analyze the current method with the proposed scheme with respect to call success rate, access time and crankback rate. Simulation result analysis showed the proposed spanning tree topology aggregation scheme presents the better performance than existing scheme.

• The KIPS Transactions:PartC
• /
• v.18C no.6
• /
• pp.441-444
• /
• 2011

In this study, we present a method for efficiently aggregating network state information. It is especially useful for aggregating links that have both delay and bandwidth in an asymmetric network. Proposed method reduces the information distortion of logical link by integration process after similar measure and grouping of logical links in multi-level topology transformation to reduce the space complexity. It is applied to transform the full mesh topology whose Service Boundary Line (SBL) serves as its logical link into a spanning tree topology. Simulation results show that aggregated information accuracy and query response accuracy are higher than that of other known method.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.27 no.3
• /
• pp.86-94
• /
• 1990

This paper suggests a unified packet telecommunication network, which is designed by applying network design algorithm and distribution network design algorithm, Proposed local network design algorithm is based on MST topology, and it can satisfy the limited capacity and get a distribution effect of communication flow, With the result of the comparison with Kruskal and Esau-Willams algorithm, an increase of 2.7% in cost and a decrease of 44.8% in average delay time are shown. Starting with MST topology, proposed distribution network design algorithm gradually increases its reliability, and proposes a conclusive algorithm to determine a topology with minimum cost. In compared with Cut-Saturation algorithm in the aspect of end-to-end delay time and communication flow restricted condition, this proposed algorithm results in 1/7 cost down and about 2.5 times increases in Throughput.