• Title/Summary/Keyword: 망간강

Search Result 53, Processing Time 0.02 seconds

Fatigue Crack Growth Behavior of Non-Magnetic Steel with Large Grain Size (조대결정 비자성강의 피로균열진전특성)

  • 남정학;최성대;이종형;정선환
    • Proceedings of the Korean Society of Precision Engineering Conference
    • /
    • 2001.04a
    • /
    • pp.807-810
    • /
    • 2001
  • Fatigue crack growth tests were carried out using high manganese cast steel under constant amplitude loading. Crystal grain size of the material is about 1000$\mu\textrm{m}$. For this material, the fatigue crack growth mechanism of high manganese steel was clarified from results such as observation of crack growth path and fracture surface. $\Delta$$K_{th}$ is about 8MPa$\surd$m which is quiet large as compared to the general structural steels and the crack growth rate is lower than the general structural steels especilly in the low $\Delta$K regsion. The reason of this behavior is crack closure due to fracture surface roughness.

  • PDF

청양광산 폐광석의 산화작용 연구를 이용한 자연 고정화 가능성 평가

  • 이평구;강민주;박성원;최상훈
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2003.04a
    • /
    • pp.132-136
    • /
    • 2003
  • 폐광된 광산에 방치된 폐광석에 함유되어 있는 황화광물이 분해되어 다른 광물에 흡착되거나, 산화환경에 안정한 형태의 2차 광물로 침전 혹은 공침 되는가에 대한 연구는 광산복 원을 결정하는데 직접적인 지구화학적 자료로 활용될 수 있다. 따라서 이번 연구에서는 청양광산에 방치된 폐광석을 대상으로 XRD, SEM/EDS연구를 이용하여 산화작용으로 인한 황화광물 주변에 침전된 2차 광물에 대한 광물학적 연구를 수행하였다. 광물학적 연구 결과, 산화환경에서 황화광물의 산화작용으로 인하여 용출된 중금속 이온과 철과 망간 이온들은 침전(Fe, Mn, Pb), 공침 (Fe, Mn, As, Pb) 및 흡착(As, Cu, Pb, Zn) 등의 화학반응을 통하여 다시 고정화됨으로서, 현장에서 자연적으로 정화되고 있는 것이 확인되었다.

  • PDF

The Metallurgy of Induction Surface Hardening (유도 표면 경화의 야금학적 고찰)

  • Jang, W.Y.
    • Journal of the Korean Society for Heat Treatment
    • /
    • v.14 no.4
    • /
    • pp.235-239
    • /
    • 2001
  • 급속 표면가열과 기존의 전기로 열처리에서 얻어지는 경화의 가장 중요한 차이점은 전자가 불균질한 오스테나이트를 생성할 수도 있다는 것이다. 즉, 오스테나이트에 미용해 탄화물이 존재할 수도 있고 탄소와 합금원소의 농도 구배가 존재할 수도 있다. 합금강에서, 이러한 탄화물은 합금성분이 비교적 높기 때문에 철 탄화물에 비해서는 좀 더 천천히 기지에 용해된다. 또한 망간, 크롬, 니켈 및 몰리브덴과 같은 치환형 합금원소는 천천히 확산한다. 따라서, 균일한 오스테나이트를 생성하기 위해서는 더 많은 시간과 더 높은 온도가 요구된다. 그러나 표면 구역의 낮은 경화능에도 불구하고 냉각속도가 마르텐사이트의 체적분율이 큰 미세조직을 확보할 만큼 충분히 크기 때문에 경도는 높게 된다.

  • PDF

Dynamic Material Property of Mn-B Alloy High-Strength Steel (Mn-B 합금계 고강도 강의 동적 물성)

  • Choi, Chang;Hong, Sungin
    • Journal of the Korean Society for Precision Engineering
    • /
    • v.13 no.11
    • /
    • pp.124-131
    • /
    • 1996
  • The dynamic material property of Mn-B ally high-strength steel is investigated through the rod impact test which is one of simple test methods for the analysis of the material behavior under high-strain-rate. Rod impact test is performed to produce the deformed shape of rod and analyzed by the one-dimensional theory based on conservation law and the two-dimensional hydrocode AUTODYN-2D. The dynamic yield stress is determined and compared with the static yield stress to investigate the strain-rate sensitivity of Mn-B alloy high-strength steel.

  • PDF

Heavy Metal Retention by Secondary Minerals in Mine Waste Rocks at the Abandoned Seobo Mine (서보광산 폐광석 내 2차 광물에 의한 중금속 고정화)

  • 이평구;강민주;최상훈;신성천
    • Economic and Environmental Geology
    • /
    • v.36 no.3
    • /
    • pp.177-189
    • /
    • 2003
  • The main purposes of this study are to utilize mineralogical studies such as optical microscope, XRD and SEM/EDS analyses to characterize the oxidation of sulfide minerals and the mechanisms controlling the movement of dissolved metals from waste rocks at the abandoned Seobo mine. Mineralogical research of the waste rocks confirms the presence of anglesite, covellite, goethite, native sulfur and nsutite as secondary minerals, suggesting that these phases control the dissolved concentrations of As, Cu, Fe, Mn, Pb and Zn. The dissolved metals are precipitated, adsorbed and/or coprecipitated with(or within) Fe(Mn)-hydroxides and Mn(Fe)-hydroxides. The main phases of secondary mineral, Fe-hydroxide, can be classified as amorphous or poorly crystalline and more crystallized phases(e.g. goethite) by crystallinity. Amorphous or poorly crystalline Fe-hydroxide has relatively high As contents(9-24 wt.%). This poorly crystalline Fe-hydroxide changes toward more crystallized phase(e.g. goethite) which contains relatively low As(0.6-7.7 wt.%). These results are mainly due to the progressive release of As with the crystallization evolution of the As-trapping poorly crystalline Fe-hydroxides. It is also attributed to the differences of specific surface areas between the poorly crystalline Fe-hydroxides and well crystallized phases. The dissolved metals from waste rocks at Seobo mine area are naturally attenuated by a series of precipitation(as Fe, Mn, Cu, Pb), coprecipitation(Fe, Mn) and adsorption(As, Cu, Pb, An) reactions. The results of mineralogical researches permit to assess the environmental impacts of mine waste rocks in the areas, and can be used as a useful data to lay available mine restoration plan.

Preparation of PVdF Composite Nanofiber Membrane by Using Manganese-Iron Oxide and Characterization of its Arsenic Removal (망간-철 산화물을 이용한 PVdF 나노섬유복합막의 제조 및 비소 제거 특성 평가)

  • Yun, Jaehan;Jang, Wongi;Park, Yeji;Lee, Junghun;Byun, Hongsik
    • Membrane Journal
    • /
    • v.26 no.2
    • /
    • pp.116-125
    • /
    • 2016
  • This study described a synthesis of MF having a arsenic removal characteristics and the fundamental research was performed about the simultaneous removal system of both As(III) and As(V) ions with the composite nanofiber membrane (PMF) based on PVdF and MF materials for the water-treatment application. From the TEM analysis, the shape and structure of MF materials was investigated. The mechanical strength, pore-size, contact angle and water-flux analysis for the PMF was performed to investigate the possibility of utilizing as a water treatment membrane. From these results, the PMF11 showed the highest value of mechanical strength ($232.7kgf/cm^2$) and the pore-diameter of composite membrane was reduced by introducing the MF materials. In particular, their pore diameter decreased with an increase of iron oxide composition ratio. The water flux value of PMF was improved about 10 to 60% compared with that of neat PVdF nanofiber membranes. From the arsenic removal characterization of prepared MF materials and PMF, it was shown the simultaneous removal characteristics of both As(III) and (V) ions, and the MF01, in particular, showed the highest adsorption-removal rate of 93% As(III) and 68% As(V), respectively. From these results, prepared MF materials and PMF have shown a great potential to be utilized for the fundamental study to improve the functionality of water treatment membrane.

Preparation of Cellular Liquid from Brown Seaweeds for Functional Tonic Products (기능성 음료의 개발을 위한 갈조류 생세포액의 제조)

  • 강영주;류근태;김효선
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.25 no.1
    • /
    • pp.94-103
    • /
    • 1996
  • 기능성 해조음료를 개발하기 위하여 미역, 톳 및 다시마를 저온하에서 마쇄, 원심분리, 한회여과를 거쳐 생해조 세포액을 얻었으며, 각 해조 생세포액의 성분 분석과 색차 측정 및 관능검사를 통하여 품질평한 결과 다음과 같았다. 원심분리 후 한외 여과에 의한 생세포액의 수율은 생해조에 대하여 6.8~56.5% 였으며, 톳과 미역의 수율은 높았으나 다시마는 수율이 낮았다. 해조액을 한회여과한 다음 동결건조한 시료의 회분 합량은 28~60%였으며, 조단백 함량은 12.7%~6.7%정도 였는데 미역과 톳은 다시마 보다 각 성분의 함량이 많았다. 알긴산과 chlrophyll 및 carotenoid 은 한회여과막에 의하여 대부분 제거되었으나 톳의 polyphenol은 30K 한외여과막에 의해서도 효과적으로 제거되지 않았다. 다시마와 톳 생세포액의 주요 아미노산은 glutamic acid와 aspartic acid 였으며, 미역의 경우는 alanine, aspartic acid, valine이었다. 해조 생세포액중의 무기 질은 칼륨의 함량이 특히 높았으며 양이온의 경우 나트륨, 마그네슘, 칼슘, 철, 아연, 망간, 구리순으로 함유 되어있었다. 음이온으로는 $Cl^{-}$,$SO_{4}^{2-}$,$HPO_{4}^{2-}$,$NO_{3}^{-}$의 함량이 높았으며, I와 Br의 함량은 다시마가 톳과 미역에 비하여 높았다.

  • PDF

pH변화에 따른 광미와 오염된 토양에 함유된 중금속 용출특성

  • 이평구;강민주;최상훈
    • Proceedings of the Korean Society of Soil and Groundwater Environment Conference
    • /
    • 2003.04a
    • /
    • pp.141-144
    • /
    • 2003
  • 청양 및 서보광산에서 채취한 광미 및 오염된 토양에 대한 산성비를 고려한 용출실험 결과, 아연, 카드뮴 및 망간 pH 6.2-5.8, 철 pH 5.2-3.2, 코발트 pH 4.4-3.2, 구리 pH 3.2-3.0, 납과비소 pH3.0-3.5의 용출조건에서 최초로 각 원소의 용출이 발생하였다. 반응용액의 최종 pH5.0-1.5사이에서 용출되는 중금속은 이온교환형태 및 탄산염광물형태와 수반된 것이 용해된 것이다. 반응용액의 최종 pH1.5이하에서 용출되는 중금속은 철과 밀접하게 수반된 것으로 해석되었다. 청양광산과 서보광산의 광미가 pH2.0이하로 유지되는 경우가 발생한다면, 청양광산은 비소(최대 6,006$\mu\textrm{g}$/g), 아연(최대 2,503$\mu\textrm{g}$/g) 및 납(최대 29,638$\mu\textrm{g}$/g), 서보광산은 납(최대 2,258$\mu\textrm{g}$/g)과 111소(최대 874$\mu\textrm{g}$/g)의 오염확산이 크게 우려되며, 이 결과는 광미에 대한 환경복원이 필요한 것을 지시한다. 서보광산의 오염된 토양은 pH3.0까지의 산성비와 반응하는 경우에는 중금속의 오염확산이 거의 우려되지 않으며, pH3.0이하의 강산 용액과 반응한다면 아연의 오염확산이 우려된다.

  • PDF

Effects of Strain Rate and Temperature on Tensile Properties of High Mn Twinning Induced Plasticity Steels (고망간 Twinning Induced Plasticity 강의 인장 특성에 미치는 변형률 속도와 온도의 영향)

  • Lee, Junghoon;Lee, Sunghak;Shin, Sang Yong
    • Korean Journal of Materials Research
    • /
    • v.27 no.12
    • /
    • pp.643-651
    • /
    • 2017
  • Four types of high Mn TWIP(Twinning Induced Plasticity) steels were fabricated by varying the Mn and Al content, and the tensile properties were measured at various strain rates and temperatures. An examination of the tensile properties at room temperature revealed an increase in strength with increasing strain rate because mobile dislocations interacted rapidly with the dislocations in localized regions, whereas elongation and the number of serrations decreased. The strength decreased with increasing temperature, whereas the elongation increased. A martensitic transformation occurred in the 18Mn, 22Mn and 18Mn1.6Al steels tested at $-196^{\circ}C$ due to a decrease in the stacking fault energies with decreasing temperature. An examination of the tensile properties at $-196^{\circ}C$ showed that the strength of the non-Al added high Mn TWIP steels was high, whereas the elongation was low because of the martensitic transformation and brittle fracture mode. Although a martensitic transformation did not occur in the 18Mn1.9Al steel, the strength increased with decreasing temperature because many twins formed in the early stages of the tensile test and interacted rapidly with the dislocations.

Contents of Heavy Metals in Soils of the Kum-Ho River Basin (금호강류성 하상토양중 중금속함량)

  • 문효노;장봉기;김두희
    • Journal of environmental and Sanitary engineering
    • /
    • v.5 no.1
    • /
    • pp.1.1-14
    • /
    • 1990
  • This study was conducted to investigate the contents of heavy metals in soils of the Kumho river basin, by analyzing soils according to the distance from edge of the river and to the soil layers. The contents of heavy metals in soils showed highly in its downstream. Namely there was shown a remarkably high contents of these heavy metals in the Kum-ho bridge areas where Kongdan stream joins Dalseo stream, such as 39.52ppm for zinc, 35.92ppm for copper, 97.90ppm for iron, 102.45ppm for manganese, 13.92ppm for lead, respectively, and 0.48ppm for cadmium. However, the heavy metals contents in soils around Kangchang bridge tended to gradually decrease in its contents, probably because its main soils consisting of sand. Based on their soil layers, the average contents of these heavy metals in the surface soils were higher than one of the subsurface soil. Its contents according to the distance from the river edge indicated some difference every individual area. Nevertheless, its contents showed lower contents in the area far away from the edge. And its contents tended to again increase in the outside bank. In addition, a remarkable positive correlation is shorten between individual heavy metals, except correlation between iron and lead. Also cadmium just shows reverses correlation in the statistics. With respect to comparison between soil layers, there was a remarkable positive correlation between surface layers and subsurface layers. Considering the above results, it seems that the pollution of river bed's soil is in proportion to it of stream.

  • PDF