Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.308-308
/
2012
현재 결정질 태양전지 제작에 있어 공정 단가 및 재료비 절감을 위해 실리콘 웨이퍼의 두께가 점점 얇아지는 추세이며, 이에 따른 장파장 영역 흡수 손실을 감소시키기 위한 방안으로 후면 패시베이션에 관한 연구가 활발히 진행되고 있다. 후면 패시베이션층으로는 SiO2, SiNx, a-Si:H, SiOxNy 등의 물질이 사용되고 있으며, 본 연구에서는 SiO2/SiNx/SiO2 (ONO)의 삼중막 구조를 패시베이션층으로 하여 SiNx 단일막 구조와의 열처리 온도에 따른 소수캐리어 수명(${\tau}eff$), 후면 재결합속도(Seff), 확산거리(LD) 등의 파라미터 변화를 비교하였다. 증착 직후와 $350^{\circ}C$에서의 Forming Gas Annealing (FGA), 그리고 $800^{\circ}C$의 고온에서의 fast firing 후의 각각의 파라미터 변화를 관찰하였다. 증착 직후 SiNx 단일막과 ONO 삼중막의 소수캐리어 수명은 각각 $108{\mu}s$와 $145{\mu}s$를 보였다. 후면 재결합속도는 65 cm/s와 44 cm/s를 보였으며, 확산거리는 각각 $560{\mu}m$와 $640{\mu}m$를 나타내었다. FGA와 firing 열처리 후 세 파마미터는 모두 향상된 값을 보였으며 최종 firing 처리 후 단일막과 삼중막의 소수캐리어 수명은 각각 $196{\mu}s$와 $212{\mu}s$를 보였다. 또한 후면 재결합속도는 28 cm/s와 24 cm/s를 보였으며, 확산거리는 각각 $750{\mu}m$와 $780{\mu}m$를 보여 ONO 삼중막 구조의 경우에서 보다 우수한 특성을 보였다. 본 실험을 통해 SiNx 단일막보다 ONO 패시베이션 구조에서의 열적안정성이 우수함을 확인하였으며, 또한 ONO 패시베이션 구조는 열적 안정성뿐 아니라 n-type 도핑을 위한 Back To Back (BTB) 도핑 공정 시 후면으로 의 도펀트 침투를 막는 차단 층으로서의 역할도 기대할 수 있다.
NBR-Clay hybrid membranes were prepared by melt intercalation method with internal mixer and two roll mills. MMT was intercalated or ekfoliated by the NBR and it was confirmed by X-ray diffraction method. D-spacing of the characteristic peak from MMT plate in WAXD was moved and diminished. Gas permeability, mechanical properties and thermal properties of the NBR-Clay hybrid membranes were investigated. Gas permeability through the NBR-Clay hybrid membranes decreased due to increased tortuosity made by intercalation of clay in NBR.
Proceedings of the Korean Vacuum Society Conference
/
2012.02a
/
pp.326-326
/
2012
ZnS를 합성하는 방법 중 thioacetamide (TAA)를 녹인 물에 ZnO template를 넣어서 황화시키는 방법이 있다. 이 방법은 실험과정이 간편할 뿐만 아니라 그 반응양의 조절도 용이해 ZnS-ZnO core-shell 구조나 ZnS hollow 구조 등을 만드는데 널리 사용되고 있다. 그러나 다양한 형태의 ZnS 구조체 합성에 관한 연구는 활발한 반면, ZnS의 상형성 과정이나 구조 변화와 같은 ZnO의 황화 과정 기구에 관한 연구는 매우 미비한 실정이다. ZnS는 기본적으로 저온에서는 cubic sphalerite 구조를, 고온에서는 hexagonal wurtzite 구조를 안정상으로 가진다. 또한, 8H나 15R 등과 같은 다양한 polytype 구조도 존재한다. 그러나 다양한 구조에서 비슷한 면간거리가 존재하기 때문에 결정구조의 분석이 어려운 실정이다. 이러한 비슷한 면간거리를 가지는 ZnS 등의 결정구조 분석에 있어 원자배열을 직접적으로 관찰할 수 있는 투과전자현미경 (TEM, transmission electron microscopye)을 이용한 연구는 큰 강점을 가진다. 본 연구에서는 다공성 ZnO 막을 황화시켜 형성된 ZnS 막의 미세구조 특성을 분석하였다. 다공성 ZnO 막은 패턴된 Si (111) 기판 위에 스핀코팅법을 이용하여 4,000 rpm의 속도로 증착되었으며 ZnO 결정화를 위해 150 도와 500도에서 각각 drying과 후열처리를 수행하였다. 이렇게 만들어진 ZnO 막을 TAA를 녹인 물에 넣어 48 시간 동안 반응시켰고 최종적으로 ZnS 막을 생성하였다. 다공성 ZnS 막의 미세구조를 분석하기 위해 주사전자현미경 (SEM, scanning electron microscope), X-선 회절분석기 (XRD, x-ray diffractometer), 그리고 투과전자현미경을 이용하였으며, 정확한 결정구조 분석을 위하여 결정구조 시뮬레이션을 병행하였다.
In this study, we tried to solve membrane fouling with membranes made by fine nano-particle in MBR process. And we confirmed good fouling resistance in pilot test. In this test, we confirmed our membrane with titania out-standing quality by testing in the pilot long-term test by comparing to other company product. Our membrane keep up steadily $20{\sim}25 L/m^2{\cdot}hr$ high flux in $7,000{\sim}13,000mg/L$ MLSS high sludge concentration. In addition to this quality, we studied membrane flux character related membrane arrangement, membrane-air line arrangement, air-line hole size, cleaning solution concentration, treatment method, etc. Using the optimization of this additional parameter, we tried to search method of maximizing membrane quality.
Park, Jong-In;Myeong, Hyeon-Sik;Kim, Eun-Yeong;Jeon, Yu-Taek;Na, Sang-Muk
Proceedings of the Korean Institute of Surface Engineering Conference
/
2007.11a
/
pp.41-41
/
2007
타겟-모재간 거리를 변수로 하여 마그네트론 스퍼터링법에 의해 CrN 박막을 합성하고 미세구조 및 물성을 평가하였다. 타겟-모재간 거리 85mm 및 180mm에서 CrN 박막을 합성하였으며, 합성된 코팅막의 내식 특성을 평가하기 위해 양극분극시험을 수행하였다. 타겟-모재간 거리 변화에 따른 미세구조 변화를 관찰하기 위해 주사전자현미경을 이용하여 박막의 파단면 조직을 관찰하였으며, XRD 분석을 통해 상천이 거동을 관찰하고 이를 물성 결과와 비교 분석하였다.
Phase-change optical disk very rapid recording, high densification of data, resulting in high feedback rate and good C/N(carrier to noise) ratio of a feedback signal. However, repetitive thermal energy may cause the deformation of a disk or the lowering of an eliminability and a cyclability of the recording. The lowering of the cyclability can be reduced by insertion of thin layer of ZnS-$SiO_2$ dielectric thin film in appropriate disk structure between the upper and lower part of the recording film. Using the Taguchi method, optimum conditions satisfying both the optimized quality characteristic values and the scattering values for film formation were found to be the target R.F. power of 200W, the substrate R.F. power of 20W, the Ar pressure of 6mTorr, and the electrode distance of 6cm. From the refractive index data, the existence of the strong interaction between the electrode distance and Ar pressure was confirmed, and so was the large effect of the electrode distance on transmittance. According to the analysis of TEM and XRD, the closer the electrode distance was, the finer was the grain size due to the high deposition rate. However, the closer electrode distance brought the negative effect on the morphology of the film and caused the reduction of transmittance. AFM and SEM analyses showed that the closer the electrode distance was, the worse was the morphology due to the high rate of the deposition. Under optimum condition, the deposited thin film showed a good morphology and dense microstructure with less defects.
Nam Sang Yong;Goo Hyung Seo;Kim In Ho;Kim Young Jin;Joo Dae Seong;Park Ji Soon;Kim Jin Hak
Membrane Journal
/
v.14
no.4
/
pp.320-328
/
2004
Ionomer-Clay hybrid membranes were prepared by melt intercalation method with twin extruder. MMT was intercalated or exfoliated by the ionomer and it was confirmed by X-ray diffraction method. D-spacing of the characteristic peak from MMT plate in WAXD was moved and diminished. Gas permeability, mechanical properties and thermal properties of the ionomer-clay hybrid membranes were investigated. Gas permeability through the ionomer-clay hybrid membranes decreased due to increased tortuosity made by intercalation of clay in Ionomer.
Nam Sang Yong;Yeom Bong Yeol;Min Byoung Ryul;Kim Young Jin
Membrane Journal
/
v.15
no.1
/
pp.62-69
/
2005
SEBS-clay hybrid membranes were prepared by melt intercalation method with internal mixer. In the hybrid, the amount of clay content was fixed to 5 phr. MMT was intercalated or exfoliated by the ionomer and it was confirmed by X-ray diffraction method. D-spacing of the characteristic peak from MMT plate in SAXD was moved and diminished. Gas permeability, mechanical properties and thermal properties of the SEBS-clay hybrid membranes were investigated. Gas permeability through the SEBS-clay hybrid membranes decreased due to increased tortuosity made by intercalation of clay in SEBS.
Proceedings of the Optical Society of Korea Conference
/
2000.08a
/
pp.190-191
/
2000
종래의 자기광학 디바이스는 자성체막을 빛이 투과할 때 얻어지는 페러데이 회전각을 이용했기 때문에, 페러데이 회전각을 증가시켜서, 광학적 성능을 증가시키려면 자성체막의 두께를 증가시켜야만 했다. 그러나, 자성체막의 두께를 증가시키면, 화소를 자기적으로 분리하기 위하여 자성체 막을 물리적으로 제거 해야하여 깊이가 깊어지고 그 후에 도선막을 구조화하기 위하여 파낸 화소간 갭을 다시 평탄화해야 하는 등의 제조 공정이 기술적으로 매우 어려워진다는 문제점을 가지고 있었다. 또한, 자성체 막의 두께가 증가하면, 도선막에 전류를 흘려 발생하는 자장은 도선막으로부터의 거리의 제곱에 반비례하므로, 두꺼운 자성체 막 전체에 강한 자장을 인가하기 위해서는, 도선막에 흘리는 전류를 증가시켜야만 한다는 문제점을 안고 있었다. (중략)
Titanium oxide films were deposited by the HCP (hollow cathode plasma) reactor at room temperature. With results of simulation about HCP reactor, the temperature profile is uniform on substrate regardless of the heat generation at cathode. The velocity profile on the surface of substrate is more uniform with increasing the gap between cathode and substrate, and surface roughness was decreased with increasing the gap between cathode and substrate. We could confirm that the composition of oxide increased with RF-power, and the ratio of O to Ti in the films was about 2 : 1 at RF-power of 240 watt and distance between cathode and substrate of 3 cm.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.