• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.11
• /
• pp.753-764
• /
• 2020

In this study, the plastic zone and internal earth pressure of the tunnel were calculated using the following three methods: metal plasticity to analyze the deformation of metal during plastic processing, Terzaghi's earth pressure theory from the geotechnical perspective and modified Terzaghi's earth pressure theory, and slip line theory using Mohr-Coulomb yield conditions. All three methods are two-dimensional mathematical analysis models for analyzing the plane strain conditions of isotropic materials. Using the theory of metallurgical plastics, the plastic zone and the internal earth pressure of the ground were obtained by assuming that the internal pressure acts on the tunnel, so different results were derived that did not match the actual tunnel site, where only gravity was applied. An analysis of the plasticity zone and earth pressure via the slip-line method showed that a failure line is formed in a log-spiral, which was found to be similar to the real failure line by comparing the results of previous studies. The earth pressure was calculated using a theoretical method. Terzaghi's earth pressure was calculated to be larger than the earth pressure considering the dilatancy effect.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.83-86
• /
• 2008

In this study, friction test was proposed to obtain coefficient of friction between tube and die in guide zone of tube hydroforming and friction coefficients were evaluated at different materials, viscosity of lubricants and internal pressures. For this study, STKM11A and SUS tubes were prepared. The tube was expanded by an internal pressure against the tool wall. By pushing the tube through the tool, a friction force at the contact surface between the tube and the tool occurs From the recorded axial feeding forces, the friction coefficients between tube and die at the guide zone in tubular hydroforming can be estimated. The effects of the various internal pressures, viscosity of lubricants, tube materials, tube size and die coating on the friction forces and friction coefficients are discussed.

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 2008.10a
• /
• pp.359-362
• /
• 2008

In this study, friction test was proposed to obtain coefficient of friction between tube and die in expansion zone of tube hydroforming and friction coefficients were evaluated at different materials, viscosity of lubricants and internal pressures. For this study, STKM11A and SUS tubes were prepared. The tube was expanded by an internal pressure against the tool wall. The tube was expanded by an internal pressure against the tool wall. By pushing the tube through the tool, a friction force at the contact surface between the tube and the tool occurs. From the measured geometries and FE analysis, the friction coefficients between tube and die at the expansion zone in tubular hydroforming can be estimated. The effects of the various internal pressures, viscosity of lubricants, tube materials and tube thickness on friction coefficients are discussed.

• Tribology and Lubricants
• /
• v.20 no.5
• /
• pp.225-230
• /
• 2004

Most studies of elsatohydrodynamic lubrication are oriented only to the measurement of film thickness itself with optical interferometer. In order to exactly investigate the tribological characteristics of a certain lubricant, it is also important to get the information of traction behaviors as well. In this work, we developed a device for measuring the friction force of ehl contact condition as well as the film thickness. To verify the validity of the measuring system, the friction forces and film thicknesses under ehl condition are simultaneously measured with the variations of additive ratios of viscosity index improvers which cause non-linear tendencies of film thickness to contact velocity.

• Journal of the Korean Society for Railway
• /
• v.11 no.2
• /
• pp.176-181
• /
• 2008

This paper presents results from experimental analysis of a friction-driven wheel responsible for generating wheel squeal noise. Squeal noise generating mechanism has been examined under the laboratory condition by the model rig on a small scale. Creep characteristics and squeal noise were observed by changing the possible variables, such as relative velocities and friction coefficients in time- and frequency-domain.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2002.05a
• /
• pp.267-271
• /
• 2002

Most studies of elsatohydrodynamic lubrication are oriented only to the measurement of film thickness itself with optical interferometer. In order to exactly investigate the characteristics of a certain lubricant, it is also important to get the information of traction force as well. In this work, we developed the device for measuring friction force of ehl contact condition together with the film thickness. To verify the validity of the measuring system, the friction force and film thickness under ehl condition are measured with the variation of additive ratios of viscosity index Improvers.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1988.06a
• /
• pp.28-30
• /
• 1988

윤활시스템에서 마모는 상대적인 운동을 하는 두 물체사이에서 표면상태, 접촉조건 및 분위기등의 제요소들에 의해 발생되며, 형태학적으로 scuffing, scoring, pitting 및 fretting 등으로 분류된다. 윤활조건의 특성에 따라 미끄럼 접촉에서는 mild wear, severe wear로 구분되며, 이들의 마모 생성기구의 차이는 접촉상대속도, 하중 및 표면조도등의 정도에 기인된다. mild wear에서 severe wear 영역으로 전이될 때의 가혹한 조건에서 생성되는 마모현상을 scuffing wear라 하며, 이는 접촉면에서의 표면돌기의 직접접촉에 의한 cold welding 현상, 즉 local welds의 특성을 지닌 마멸형태로 정의한다. 이의 생성은 접점간의 하중 및 미끄럼 속도가 증가됨에 따라 온도상승에 기인되어 순간적으로 발생된 마찰열이 그 원인이 있으며, 기어, cam 및 tappet, 피스톤링 및 실린더 라이너 등의 마멸현상이 대표적인 예이다.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.9 no.5
• /
• pp.677-682
• /
• 1985

극치해석적인 상계정리를 기초로 하여, 평면변형 인발에서 발생하는 내부결함(central bursting)을 예측하기 위해 중심에서 공동(voids)을 가진 금속에 대해 비례흐름(proportional flow)과 내부결 함의 흐름을 비교하여 해석하였다. 이 결함을 촉진시키는 공정조건에 대한 판정식(criterion)을 변형경화 금속에 대해 유도하였다. 공동을 가진 금속은 공동들을 축소시키기 위해 정상적인 재 료(sound material)의 흐름과 동일 방법으로 흐를 수 있으며, 경우에 따라서는 내부결함을 확장 하기 위해 흐를 수도 있다. 본 연구에서는 다이의 경사각, 단면감소율 및 마찰 등의 어떤 공정 변수 영역에서 중심축 상에 많은 공동을 가진 변형경화 금속에서도 내부결함이 발생할 수 있다는 것이다.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 1992.11a
• /
• pp.13-18
• /
• 1992

대형 틸팅패드 저어널베어링은 고속안정성 특성이 우수한 베어링으로서 시스템의 안정성이 매우 중요시되는 터빈발전기 등 대형 고속 회전기계에 많이 사용되고 있다. 그런데 이들 대형 저어널베어링에서는 유막의 온도상승이 매우 많고, 유체의 흐름이 거의 난류영역에 이르기 때문에 베어링의 운전특성을 정확하게 예측하기가 어려운 실정이다. Hopf & Schuler는 대형 틸팅패드 저어널베어링에 대한 실험적 연구에서 유동상태에 따라 베어링의 온도분포가 서로 달라진다고 발표하였다. 대형 틸팅패드 저어널베어링은 구조적으로 유동상태가 복잡할 뿐만 아니라 계산과정도 까다로운 편이어서 온도상승과 난류를 고려하여 엄밀하게 운전특성을 예측한 연구는 거의 없다. 따라서 본 연구에서는 대형 틸팅패드 저어널베어리으이 운전특성을 보다 엄밀하게 예측하기 위하여 3차원 적으로 유막의 점도변화 및 패드에서의 열전달을 고려하고, 와점성계수를 이용한 난류윤활이론을 사용하여 유막의 온도상승 및 난류가 베어링의 온도분포, 부하능력, 마찰손실 등의 운전특성에 미치는 영햐을 보다 엄밀하게 제시하고자 한다.

• Tribology and Lubricants
• /
• v.24 no.6
• /
• pp.386-392
• /
• 2008

Friction and wear behavior of hard coated and surface treated steel with candidate processing methods for low velocity high pressure application investigated. Wear tests were carried out under specific region considering the operation condition of construction equipments under lubricated and unlubricated condition. Different tribological behavior analyzed with comparing the wear rate of counter part, morphology and topography of worn surface and the worn volume of samples and counter parts.