• Journal of Biosystems Engineering
• /
• v.20 no.3
• /
• pp.288-298
• /
• 1995

In greenhouse vegetable, the automatic control in cultivating environment has been projected as a national business ; especially a countermeasure against the settlement of UR negotiation. Because it makes possible to manage a large greenhouse with family-hands and to expect the betterment of quality and the increasement of harvest in crops. In the course of carrying the workout, however, there are many problems with the overall control system with computers as well as the individual systems for environment control because of hardware and software problems : especially the shortage of data for development of the system is most serious. Among the many problems for development of the automatic control system, the automations of irrigation, liquefied fertilizer and chemical solution, mixing and ventilation, etc and the development of the general automatic controller system for environment control in greenhouse are studied, which requires a lot of tabors. The results are summarized as follows ; 1. In moisture control by the soil moisture meter, the error was shown 10 % in the beginning irrigation point and 19 % in the stop irrigation point. 2. The supply of liquefied fertilizers with the irrigation system was excellent by setting the operating time and the mixing ratio. 3. The developed chemical spraying system was operated well, but not perfect in nozzle positions. 4. The cucumber was cultivated properly with the trickle irrigation system. 5. The developed controller for the automatic control system in greenhouse was remarkable in the part of hardware, but more researches are needed in the part of software.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.7
• /
• pp.524-538
• /
• 1989

A new bilateral series resonant inverter and its control method are proposed. The proposed inverter consists of zero current switched cycloconverter. Output voltage is regulated by modulating the average magnitude of resonant current sinusoidally. Cycloconverter synthesizes low frequency output voltage from high frequency resonant current pulses. In the proposed inverter, bidirectional power flow in possible and isolation transformer is miniaturized. The proposed control method is verified through simulation and experiment. The proposed inverter will satisfy the small size and low cost requirements of small Uninterruptible Power Supply (UPS) of less than 1 KVA suitable for micro-computers and electronic equipments used in office and home automation.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.29 no.1
• /
• pp.305-309
• /
• 2005

This paper deals with an development of screen technology for marine waste disposal. The conception of inverse inclined screen is introduced. For optimal solid-liquid separation the vibration frequency, vibration angle and vibration method are inquired. And the efficiency of proposed technology and automatic apparatus is proved through the field test.

• Journal of KIISE:Computer Systems and Theory
• /
• v.33 no.3
• /
• pp.178-192
• /
• 2006

The buffer overflow attack is the single most dominant and lethal form of security exploits as evidenced by recent worm outbreaks such as Code Red and SQL Stammer. In this paper, we propose microarchitectural techniques that can detect and recover from such malicious code attacks. The idea is that the buffer overflow attacks usually exhibit abnormal behaviors in the system. This kind of unusual signs can be easily detected by checking the safety of memory references at runtime, avoiding the potential data or control corruptions made by such attacks. Both the hardware cost and the performance penalty of enforcing the safety guards are negligible. In addition, we propose a more aggressive technique called corruption recovery buffer (CRB), which can further increase the level of security. Combined with the safety guards, the CRB can be used to save suspicious writes made by an attack and can restore the original architecture state before the attack. By performing detailed execution-driven simulations on the programs selected from SPEC CPU2000 benchmark, we evaluate the effectiveness of the proposed microarchitectural techniques. Experimental data shows that enforcing a single safety guard can reduce the number of system failures substantially by protecting the stack against return address corruptions made by the attacks. Furthermore, a small 1KB CRB can nullify additional data corruptions made by stack smashing attacks with only less than 2% performance penalty.

• Journal of the Korea Society of Computer and Information
• /
• v.14 no.2
• /
• pp.157-168
• /
• 2009

In this paper, a photovoltaic system is designed with a step up chopper and single phase PWM(Pulse Width Modulation) voltage source inverter. Where proposed Synchronous signal and control signal was processed by one-chip microprocessor for stable modulation. The step up chopper operates in continuous mode by adjusting the duty ratio so that the photovoltaic system tracks the maximum power point of solar cell without any influence on the variation of insolation and temperature because solar cell has typical voltage and current dropping character. The single phase PWM voltage source the inverter using inverter consists of complex type of electric power converter to compensate for the defect, that is, solar cell cannot be developed continuously by connecting with the source of electric power for ordinary use. It can cause the effect of saving electric power. from 10 to 20[%]. The single phase PWM voltage source inverter operates in situation that its output voltage is in same phase with the utility voltage. In order to enhance the efficiency of photovoltaic cells, photovoltaic positioning system using sensor and microprocessor was design so that the fixed type of photovoltaic cells and photovoltaic positioning system were compared. In result, photovoltaic positioning system can improved 5% than fixed type of photovoltaic cells. In addition, I connected extra power to the system through operating the system voltage and inverter power in a synchronized way by extracting the system voltage so that the phase of the system and the phase of single-phase inverter of PWM voltage type can be synchronized. And, It controlled in order to provide stable pier to the load and the system through maintaining high lurer factor and low output power of harmonics.

• Journal of the Korea Institute of Building Construction
• /
• v.15 no.2
• /
• pp.185-192
• /
• 2015

Expansion joint is the essential element of the bridge in many cases. When the bridge faces chloride of preventing freezing on the surface of the bridge, the expansion joints is damaged significantly, thus this reduces service life and increases maintenance cost of the bridge. As a solution of this problem, new technology using high ductile materials for the joint without expansion joint was developed and in this research, crack control performance, preventing leaking after the cracking, and chloride resistance were experimentally evaluated. As a result of the experiment, with PCM and FRC materials, the connecting joint suffered poor crack dispersion and severe damage by the chloride penetration while with high-ductile material, the connecting joint dispersed the tensile deformation to microcracks stably up to 7.5mm. Furthermore, under the sever conditions, the leaking was prevented and penetration of chloride ions was prevented after the crack occurred.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.82.2-82.2
• /
• 2013

반도체 및 디스플레이 소자를 생산 하기 위하여 다양하고 많은 공정 기술이 사용 되며 그 중에서 플라즈마를 이용하는 제조공정이 차지 하는 부분은 상당한 부분을 차지 하고 있습니다. 전체 반도체 공정 중 48%가 진공공정이며, 진공공정 중 68% 이상이 플라즈마를 이용하고 있으며, 식각과 증착 장비 뿐만 아니라 세정과 이온증착 에 이르기 까지 다양하며 앞으로도 더욱 범위가 늘어 날 것으로 보입니다. 이러한 플라즈마를 이용한 제조 공정들은 제품의 생산성을 향상 하기 위하여 오염제어 기술을 비롯한 공정관리기술 그리고 고기능 센서기술을 이용한 공정 모니터링 및 제어 기술에 이르기 까지 다양한 기술들을 필요로 합니다. 플라즈마를 이용한 제조 장비는 RF파워모듈, 진공제어모듈, 공정가스제어모듈, 웨이퍼 및 글래스의 반송장치, 그리고 온도제어 모듈과 같이 다양한 장치의 집합체라 할 수 있습니다. 플라즈마의 생성과 이를 제어 하기 위한 기술은 제조장비의 국산화를 위한 부단한 노력의 결실로 많은 부분 기술이 축적되어 왔고 성과를 거두고 있습니다. 그러나 고기능 모니터링 센서 기술 개발은 그 동안 활발 하게 이루어져 오고 있지 않았으며 대부분 외산 기술에 의존해 왔습니다. 세계 반도체 시장은 현재 300 mm 웨이퍼 가공에서, 추후 450 mm 시장으로 패러다임이 변화될 예정이며, 미세화 공정이 더욱 진행 됨에 따라 반도체 제조사들의 관심사가 "성능 중심의 반도체 제조기술"로부터 "오류 최소를 통한 생산성 향상"에 더욱 주목 하고 있습니다. 공정미세화 및 웨이퍼 대구경화로 인해 실시간 복합 센서를 이용한 데이터 처리 알고리즘 및 자동화 소프트웨어의 기능이 탑재된 장비를 요구하고 있습니다. 주식회사 레인보우 코퍼레이션은 플라즈마 Chemistry상태를 정성 분석 가능한 OES (Optical Emission Spectroscopy)를 이용한 EPD System을 상용화 하여 고객사에 공급 중이며, 플라즈마의 광 신호를 실시간으로 고속 계측함과 동시에 최적화된 알고리즘을 이용하여 플라즈마의 이상 상태를 감지하며 이를 통하여 제조 공정 및 장비의 개선을 가능하게 하여 고객 제품의 생산성을 향상 하도록 하는 기술을 개발 하고 있습니다. 본 심포지엄에서는 주식회사 레인보우 코퍼레이션이 개발 중인 "실시간 고속 플라즈마 광 모니터링 기술" 의 개념을 소개하고, 제품의 응용 범위와 응용 방법에 대하여 설명을 하고자 합니다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.10a
• /
• pp.552-555
• /
• 2001

From the dissertation which it sees micro it is strong with the technical development which the computer and communication field is quick and efficiency improvement and control LAN (Local Area Network) this utility anger becomes with the pliability regarding a system construction to come to be high, central processing unit (CPU) function it separates especially and the LAN communication railway line (Data way) it uses and the controller royal tomb of process disperses, the information control and watch and operation fabrication function composes an anger making whole system intensively development background and application process and the right season of the dispersion control system which plans a reliability improvement, war potential and environment, possibility control, From industrial site of the petrochemistry back application and it investigated the dispersion control system which is applied to observe in many sidedness and until course of development of report hereafter dispersion control system it tried.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.148-156
• /
• 2001

This paper proposed embedded application-specific microprocessor(YS-RDSP) whose structure has an additional DSP processor on chip. The YS-RDSP can execute maximum four instructions in parallel. To make program size shorter, 16-bit and 32-bit instruction lengths are supported in YS-RDSP. The YS-RDSP provides programmability. controllability, DSP processing ability, and includes eight-kilobyte on-chip ROM and eight-kilobyte RAM. System controller on the chip gives three power-down modes for low-power operation, and SLEEP instruction changes operation statue of CPU core and peripherals. YS-RDSP processor was implemented with Verilog HDL on top-down methodology, and it was improved and verified by cycle-based simulator written in C-language. The verified model was synthesized with 0.7um, 3.3V CMOS standard cell library, and the layout size was 10.7mm78.4mm which was implemented by using automatic P&R software.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.366-369
• /
• 2008

무선 센서 네트워크(Wireless Sensor Network)는 차세대 IT 기술로서 소형, 저가, 저전력을 필요로 하며, 외부 환경의 모니터링과 제어기능을 수행할 수 있다. 이것은 소형 장치 안에 마이크로프로세서, 각종 센서, 액추에이터, 유 ${\cdot}$ 무선 통신 장치를 내장하는 수백 혹은 수천 개의 센서 노드로 구성된다. 본 논문에서는 이러한 센서 네트워크를 이용하여 기상의 악천 후 속에서 차량 및 도로 상황 정보를 실시간으로 미리 획득하고 분석하여 운전자에게 미리 도로의 안전속도를 통보할 수 있는 실시간 차량 안전속도 서비스 시스템을 설계하고 구현된 결과를 보여 주고자 한다. 본 시스템은 노면의 종류 및 기상 상태 등에 대한 정보를 수집하여 이를 바탕으로 운전자에게 안전 속도를 알려줌으로써 교통사고를 효과적으로 예방할 수 있는 방법을 제공할 수 있다.