• 한국정밀공학회지
• /
• 제27권11호
• /
• pp.92-97
• /
• 2010

The object of this study is to investigate the definite method for pitting damaged surfaces. Pitting is a sort of fatigue damages and it is made by a repetitive load. For a judgment between damages or not, sensing vibrations of test equipment is simple. However, it is not only difficult to observe a growth of pitting but also impossible to detect the juncture of initial pitting. Therefore, a method for the pitting damaged area measuring technique was effectively implemented by Two Roller Machine. The change of surface damaged area was measured by an optical microscope in regular time and calculated by the use of dark and bright ratio of test specimens' pictures taken by optical microscope. In conclusion, S - N Curves gained by Failure rate - Cycle graph was led and the curves are able to be chosen as occasion demands for a failure area percentage.

• Tribology and Lubricants
• /
• 제27권1호
• /
• pp.40-44
• /
• 2011

The object of this study is to investigate influences of supplied lubricant quantities on spur gear's pitting life. Pitting is a sort of contact fatigue failures and made by a repetitive load. Basically, pitting is difficult to predict its life by an analysis due to many factors to be considered about tribology problems. In this paper, pitting life was proved by experiment using two roller machine. For a contact fatigue test, operating circumstances should be considered. During the test, temperature and lubricant quantities are considered and to investigate an influence of lubricant quantities, a comparison between optimally enough and not enough lubricant quantity was implemented.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2010년도 춘계학술대회 논문집
• /
• pp.1289-1290
• /
• 2010

• 마이크로전자및패키징학회지
• /
• 제11권1호
• /
• pp.87-96
• /
• 2004

폴리머/세라믹 복합체는 유기기판용 내장형 커패시터의 가장 유망한 재료다. 폴리머/세라믹 복합체의 유효유전상수를 예측하는 것은 복합재료의 설계에 있어 매우 중요하다. 본 논문에서는 크기가 다른 5가지 $BaTiO_3$ 분말을 이용하여 분말함량에 따른 에폭시/$BaTiO_3$ 복합 내장형 커패시터 필름의 유전상수를 측정하였다. 그 측정 결과를 여러 가지 이론식들에 최소 자승법을 이용해 fitting하여 폴리머/세라믹 복합체의 유효유전상수를 예측하는데 가장 유용한 식을 찾고 BaTiO$_3$ 분말의 유전상수를 추정하고자 하였다. Lichtenecker식과 Jayasundere-Smith식이 에폭시/$BaTiO_3$ 복합 내장형 커패시터 필름의 유전상수 예측에 유용한 것으로 나타났다. 피팅을 통해 계산된 $BaTiO_3$ 분말의 유전상수는 분말의 크기에 따라 100 에서 600 사이였는데 이는 다결정 세라믹 $BaTiO_3$의 유전상수보다 작은 값이다.