• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제26권9B호
• /
• pp.1196-1202
• /
• 2001

본 논문에서는 대역통과 필터특성을 위해 통과대역의 상단과 하단의 저지대역에서 감쇄극을 갖는 두 종류의 새로운 마이크로스트립 구조를 제안한다. 이 구조는 TEM모드의 유전체 공진기를 마이크로스트립선로에 용량성 또는 유도성의 병렬 포스트와 연결하여 구성된다. 제안한 구조에 대한 등가회로를 추출하였다. 이 구조의 S-파라미터를 실험과 등가회로 시뮬레이션으로 구하였고, 그리고 유도성포스트의 경우는 3D-FDTD 계산을 추가하여 서로를 비교하였는데 등가회로 모델이 이들 결과와 매우 잘 일치하였다.

• Journal of the Korea Institute of Military Science and Technology
• /
• 제5권2호
• /
• pp.91-102
• /
• 2002

불연속 전송선로를 해석하기 위한 유용한 방법으로서 유한요소법이나 공간도메인법등과 같은 주파수영역 해석법과 선로제작에 기초한 파라미터 측정법등이 사용된다. 시간영역의 유한차분법은 한번의 모의실험을 통해 주파수 의존적인 파라미터값을 구할수있어 불연속선로를 해석하는데 매우 효과적이다. 본 논문에서는 마이크로 스트립에 기초한 몇가지 형태의 2 포트 불연속 회로망 즉, 케스케이된 스텝 불연속 선로와 레이스트렉 지연선 및 단일 스터브 필터에 대한 정확한 모델링과 해석을 위하여 시간영역의 유한차분법의 적용방법이 논의된다. 2 포트 회로망으로 구성된 평면형 마이크로 스트립 불연속선로를 해석하기 위하여 일반적으로 분산 파라미터에 기초한 해석절차가 사용된다. 주파수 의존적인 분산 파라미터는 시간영역의 유한차분법에 의해 모니터된 입사, 반사 및 투과된 전압으로 부터 고속푸리에 변환을 통해 얻어지고, 또한 그 결과를 공간-스펙트랄 방법 및 모멘트 방법의 결과와 비교함으로써 시간영역의 유한차분법이 다양한 형태의 불연속 선로에 성공적으로 적용됨을 볼 수 있다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• 제21권3호
• /
• pp.307-314
• /
• 2010

In this paper, a novel ultra-wideband microstrip-to-suspended stripline(SSL) transition is proposed, and SSL filters with low-loss and high selectivity have been realized using this transition. Since the proposed transition has low-loss and wide bandwidth characteristic, the design procedure of SSL filters become simplified. Additionally, the designed filters do not require extra time-consuming tuning. As design examples, SSL low-pass and high-pass filters have been implemented, and a implemented bandpass filter with connection of the low and high-pass filters performs 2.3~10.5 GHz bandwidth with less than 1.2 dB insertion loss and high selectivity.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• 제37권3호
• /
• pp.35-42
• /
• 2000

A cross-shaped microstripline-fed printed slot antenna having wide bandwidth Is presented in this paper. The proposed antenna is analyzed by using the Finite-Difference Time-Domain (FDTD) method. It was found that the bandwidth of the antenna depends highly on the length of the horizontal and vertical feedline as well as the offset position of the feedline. The maximum bandwidth of this antenna is from 1.975 GHz to 4.725 GHz, which is approximately 1.3 octave, for the VSWR $\leq$ 2. Experimental data for the return loss and the radiation pattern of the antenna are also presented. and they are in good agreement with the FDTD results.e FDTD results.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제14권1호
• /
• pp.75-83
• /
• 1989

In this paper, applying the REC model which characterizes the coupling between the radiating edges to two coupled rectangular microstrip patch antenna, we obtain scattering parameters $\mid$ $S_{11}$ $\mid$ and $\mid$ $S_{12}$ $\mid$for the various coupling separations, Se=0.5mm, 1.0mm, 1.5mm, and 2.0mm, The calculated values are compared with the measured values. For the rectangular microstrip patch antenna with a parasitic element which is gap-coupled to the radiating edges of the rectangular patch, calculated return losses using the REC model are compared with measrued values. Here, the each microstrip antenna is fed by a 50 microstrip line. The purpose of the paper is to compare a 50$\Omega$ microstrip line fed case with a coaxial fed case treated in Ref.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 한국전자파학회 2000년도 종합학술발표회 논문집 Vol.10 No.1
• /
• pp.328-332
• /
• 2000

본 논문에서는 기생 패치 구조와 적층 구조의 광대역 마이크로스트립 안테나에 평행 결합 선로 형태의 광대역 임피던스 정합 회로를 결합하여 쉽게 추가적인 임피던스 대역폭 개선을 얻을 수 있음을 제안하였다. 평행 결합 선로 형태의 광대역 임피던스 정합 회로 설계를 위하여 분포 회로 방식의 반복적인 방법을 제시하였고. 설계\ulcorner제작 결과 기생 패치 구조와 적층 구조에서 각각 56.23%와 16.45%의 추가적인 임피던스 대역폭 개선을 이룰 수 있었다. 그리고 방사 패턴과 측정된 이득을 보면 평행 결합 선로의 결합으로 인한 방사 패턴에서의 큰 변화는 보이지 않았고, 이득에서는 평행 결합 선로 부분의 커플링 손실로 인해 최대 이득이 약 1 dB 정도 감소하는 것을 확인할 수 있었다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• 제18권10호
• /
• pp.2339-2344
• /
• 2014

of a microstrip transmission line, this transmission line can operate as the microstrip line or the coplanar line according to open or short connection between the ungrounded copper plane and grounded plane on the base plane. Two different type operation of the transmission line means that one transmission line can have two different characteristic impedances. This paper proposes and fabricates the circuit to be operated 2-ports power transmission line or 2-way power divider with the stable input matching characteristic by using this dual-impedance transmission line. The proposed circuit operates 2-ports power transmission line in case of the coplanar line or 2-way power divider line in case of the microstrip line. The fabricated circuit shows $S_{21}$ > -0.2 dB and $S_{11}$ < -15 dB above 700 MHz when the circuit operates 2-ports power transmission line. And, it is $S_{21}$ > -3.8 dB, $S_{11}$ < -10 dB and $S_{21}/S_{31}$ < ${\pm}0.3dB$ above 700 MHz when the circuit operates 2-way power divider.

• The Proceeding of the Korean Institute of Electromagnetic Engineering and Science
• /
• 제2권1호
• /
• pp.46-54
• /
• 1991

A noble phased-array antenna of the circular form with microstrip slots was designed for steering the radiation beam and increasing the directivity and gain. The directivity and gain could be controlled, varying the number of slots and the radius of a circle, but here, the 40 .deg. beam scanning antenna system was achieved by tangentially arranging 4 mi- crostrip slots on a circumference and the analog phase shifter was used to adjust phase difference in the adjacent elements. And such a system has a microstrip configuration taking the effects of the line dispersion and discontinuities into account at 10 Ghz. The experimental results were fairly agreed with theoretical values, and this circular phased array had an improved performance over the rectangular phased array with 64-microstrip patches in a view of the number of array elements.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제29권1A호
• /
• pp.77-83
• /
• 2004

Parallel coupled microstrip bandpass filter is widely used in microwave circuits. But this filter limits the filter applications because of the narrow bandwidth and the spurious passband at twice the basic passband frequency. In order to solve this problem, a method of the asymmetrical coupled microstrip lines on composite dielectric substrate is presented. Closed form method is used to analyze the asymmetrical coupled microstrip lines on composite dielectric substrate. An experimental filter is fabricated over $33\%$ bandwidth centered at 9GHz. Compared with the filter on a single substrate, this filter on composite substrate shows improvement of the spurious passband.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• 제23권7호
• /
• pp.1770-1776
• /
• 1998

This paper presents a waveguide-to-mircostrip transition at Ka-band using antipodal finlines. Critical design parameters were identified with the help of theoretical analysis. Experimental optimization was performed together with 3-D FEM analysis in an effort to find optimum dimensions of the transition. In addition to the conventional antipodal finline transition, a new dielectric impedance transformer was introduced to further reduce the insertion loss. Optimized waveguide-to-microstrip transition showed an insertion loss of 0.3~0.4dB/transition at Ka-band. This transition provides superior reproducibility and better performance than conventional coaxcable-to-microstrip transition.