• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2002.05a
• /
• pp.215-218
• /
• 2002

In this paper, we propose a microstrip line tunable phase shifter. If we vary the applied bias voltage, the relative dielectric constant of ferroelectrics also changes and we designed tunable phase shifter using Au/BSTO/MgO/Au structure. We also used a coupling structure to increase the amount of phase shift at certain frequency in a limited size and we could reduce the loss by reducing the line width.

• Journal of the Microelectronics and Packaging Society
• /
• v.5 no.1
• /
• pp.91-100
• /
• 1998

본논문에서는 현재 다 핀용 패키지로 주종을 이루고 있는 기존의 PQEP의 성능을 향상시키기 위하여 스트립 라인 배선 구조를 갖는 새로운 PQEP를 제안하였다. 기존의 208 핀 PQFP와 제안한 208핀 PQFP의 전기적 특성을 Ansoft사의 Maxwell TMA사의 Raphael 과 Avanti사의 HSPICE를 이용하여 시뮬레이션하여 비교하였다. 새로운 패키지에서는 신호 선과 파워버스라인을 스트립 구조로 만들고 감결합커패시터를 장착하여 크로스톡 잡음과 스 위칭 잡음을 크게 감소시켰다. 패키지의 리드프레임을 스트립구조로 만들기 위하여 구리가 도포된 유연성 쿠폰을 리드프레임의양측면에 부착하였다. 신호선의 특성 임피던스는 쿠폰의 유전층 두께변화를 조절함으로써 최적화하였고 유전층 두께가 100$\mu$mdlfEo 45$\Omega$의 값을 얻 었다. 시뮬레이션 결과와 측정결과 32개의 소자가 동시에 스위칭하고 전원/접지핀이 전체 리드 수의 33%일 때 동작주파수가 330Mhz됨을 확인하였으며 이는 기존 PQFP의 최대 동 작주파수인 100MHz에 비하여 3배 이상 향상됨을 보였다.

• 전자공학회논문지 IE
• /
• v.45 no.2
• /
• pp.13-19
• /
• 2008

The main advantage of the TLM analysis method is the ease with which even the most complicated transmission line structures. In this paper, using symmetrical condensed node(SCN), the TLM numerical technique has been successfully a lied to microstrip meander line. A detailed technique of the symmetrical condensed node(SCN) may be used to model planar microstrip transmission line is presented. Also, the S-parameters $S_{11}$ and $S_{21}$ of two types of microstrip meander line have been computed. From obtained results, TLM analysis is shown to be an efficient method for modeling complicated structure of planar microstrip transmission line. The TLM results presented here are useful in the design of microwave integrated circuits at higher frequencies region.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.11 no.5
• /
• pp.773-781
• /
• 2000

We proposed an eccentric annular ring microstrip slot antenna for improving a narrow bandwidth of the conventional annular ring microstip slot antenna. The proposed antenna has an asymmetric slot and a normal microstrip feedline. This antenna is analyzed and optimized by using the finite difference time domain (FDTD) method. The impedance bandwidth of the optimized antenna is more than 1 octave that is much broader than the conventional annular ring microstrip slot antenna for the same size.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.5A
• /
• pp.513-518
• /
• 2010

Improvement of phase noise characteristics in a different approach of HEMT VCO (Voltage Controlled Oscillator) with coupled microstrip lines to tune the oscillating frequency is investigated. Two HEMT VCOs of 9.8GHz are manufactured in the same configuration except for the frequency tuning circuit in order to empirically demonstrate the phase noise reduction. Experimental result shows that phase noise reduction can be enhanced 8dBc/Hz at 100KHz offset frequency from carrier by frequency tuning circuit with coupled microstrip lines over the conventional VCO.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.15 no.10 s.89
• /
• pp.1005-1010
• /
• 2004

An analysis method of slot-coupled microstripline to waveguide transition is presented to developed a simple but accurate equivalent circuit model. The equivalent circuit consists of an ideal transformer, microstrip open stub, and admittance elements looking into a waveguide and a half space of feed side from a slot center. The related circuit element values are calculated by applying the reciprocity theorem, the Fourier transform and series representation, the complex power concept, and the spectral-domain immittance approach. The computed scattering parameters are compared with the measured, and good agreement validates the simplicity and accuracy of the proposed equivalent circuit model.

• Proceedings of the KIEE Conference
• /
• 2005.07c
• /
• pp.2330-2332
• /
• 2005

마이크로 스트립 선로는 제작상의 편의성으로 인해 많은 형태의 초고주파 회로에 다양한 구조로 적용된다. 하지만 실제 설계과정에서 다양한 형상에 따른 전자기적 해석이 쉽지 않고, 구조상의 불연속성은 시스템의 성능을 감쇄 시키는 원인이 된다. 본 논문은 마이크로 스트립 라인의 전자파 특성을 해석하고, 이로 인해 최적의 형상을 찾는 방법을 제시한다. 이 최적화 방법으로 유한 차분법 설계민감도 해석 방법을 도입하여 형상을 변화 시키며, 전자파 해석 툴을 이용하여 해석된 결과를 바탕으로 설계민감도를 계산하고 수정하므로 형상 최적화를 이룬다.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.9-15
• /
• 2011

This paper suggested the fast and easy method of the dielectric constant measurement for planar dielectrics using a microstrip line. The complex permittivity and permeability were presented by the first reflection and transmission coefficient which were derived from the scattering parameters. This method was verified by the measurement of a known planar dielectric using a microstrip line. This method can be applied to the dielectric constant measurement of unknown planar dielectric.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.10 no.5
• /
• pp.79-86
• /
• 2011

In this paper, a S-band coaxial waveguide-based spatial combiner is proposed. The proposed combiner consists of coaxial waveguide, impedance transformer, and finline-to-microstrip transformer. The coaxial waveguide is used as the host of the combining circuits for higher output power and better uniformity by equally distributing the input power to each element. The finline-to-microstrip transformer is designed by using antipodal antenna, and obtained low reflection coefficient by applying the small reflection theorem. The measurement results show the coaxial waveguide combiner has a maximum combining efficiency of 95%.

• Proceedings of the Korean Institute of Communication Sciences Conference
• /
• 1986.04a
• /
• pp.220-223
• /
• 1986