• Korean Journal of Optics and Photonics
• /
• v.27 no.5
• /
• pp.181-187
• /
• 2016

We report on the parameter-dependent optical characteristics of the unidirectional single-mode lasing square ring cavities. Using the taper-step section in the square cavities, the resonant direction can be selected and we characterize the optical losses by changing the taper lengths. Various kinds of square ring cavities are fabricated, based on InGaAsP/InGaAs multiple quantum well semiconductor materials. From the experimental results we obtain the optimized taper length for a given device structure, while maintaining unidirectional single-mode lasing.

• Journal of the Korean Society for Precision Engineering
• /
• v.14 no.5
• /
• pp.118-127
• /
• 1997

In this study, We use microstep control to reduce vibration of step motor. Microstep control of step motor is usually thought of as an extension of conventional step motor control technology. The essence of micro stepping is that we divide the full step of a step motor into a number of substep called microstep and cause the stepmotor to move through a substep per input pulse. In ideal case, by controlling the individual phase currents of a two-phase step motor sinusoidally we can get uniform torque and step angle. But due to the nonlinear characteristics of the step motor, we need to compensate current waveform to improve the over-all smoothness of the conventional micro stepping system. We implement digital Pulse Width Modul- ation (PWM) driver to drive step motor and microphone was used for detecting vibration. Driver enables speed change automatically by increasing or decreasing micro stepping ratio which we call Automatic Switching on the Fly. To compensate the torque harmonics, neural network is applied to the system and we found compensated optimal input current waveform. Finally we can get smooth motion of step motor in a wide range of motor speed.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.11
• /
• pp.1248-1253
• /
• 2008

The MCS(Micro-Coplanar Strip) line with ground has been analyzed. The conformal mapping method is used to calculate the quasi-static effective dielectric constant and characteristic impedance of this MCS line. The computed results of the present work are found to be in good agreement when compared with the results obtained using commercial S/W, IE3D. And in this paper, the stepped-impedance low pass filter is designed and fabricated with MCS lines for improving the frequency responses. The LPF proposed structure has been also designed and implemented to have the sharp attenuation characteristics in stop band. The agreement between simulation and measurement results verify the implemented LPF.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.1
• /
• pp.145-151
• /
• 2010

This paper presents the design and implementation of direction controllers by microstep control and dc servo control for material transport system. The perfomances of direction control systems are compared in position responses and motor power consumptions between microstep control of a step motor and dc servo control.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.135-138
• /
• 2001

This paper presents micro step driving method using VHDL(Very high speed integrated circuit Hardware Description Language) which can configure CPLD(Complex Programmable Logic Device). Using VHDL which can do abstractive programming is similar to high level language. The whole block divided into five parts with freq. divide part, saw-tooth wave generation part, sine-cosine wave generation part, comparative part, out part. In the result of this study, peripheral circuits are to be simple and using LPM(Library of Parameterized Modules) is more easily to configure circuit. It is easy to verify and implement by using VHDL. To subdivide one natural step, we confirm that using micro step driver is expected that the rotor motion is stepless very smooth.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.5 no.2
• /
• pp.91-102
• /
• 2002

불연속 전송선로를 해석하기 위한 유용한 방법으로서 유한요소법이나 공간도메인법등과 같은 주파수영역 해석법과 선로제작에 기초한 파라미터 측정법등이 사용된다. 시간영역의 유한차분법은 한번의 모의실험을 통해 주파수 의존적인 파라미터값을 구할수있어 불연속선로를 해석하는데 매우 효과적이다. 본 논문에서는 마이크로 스트립에 기초한 몇가지 형태의 2 포트 불연속 회로망 즉, 케스케이된 스텝 불연속 선로와 레이스트렉 지연선 및 단일 스터브 필터에 대한 정확한 모델링과 해석을 위하여 시간영역의 유한차분법의 적용방법이 논의된다. 2 포트 회로망으로 구성된 평면형 마이크로 스트립 불연속선로를 해석하기 위하여 일반적으로 분산 파라미터에 기초한 해석절차가 사용된다. 주파수 의존적인 분산 파라미터는 시간영역의 유한차분법에 의해 모니터된 입사, 반사 및 투과된 전압으로 부터 고속푸리에 변환을 통해 얻어지고, 또한 그 결과를 공간-스펙트랄 방법 및 모멘트 방법의 결과와 비교함으로써 시간영역의 유한차분법이 다양한 형태의 불연속 선로에 성공적으로 적용됨을 볼 수 있다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.40 no.6
• /
• pp.431-441
• /
• 2003

This paper presents the design of 32 bit microprocessor for a sequence control using a field programmable gate array(FPGA). The microprocessor was designed by a VHDL with top down method, the program memory was separated from the data memory for high speed execution of sequence instructions. Therefore it was possible that sequence instructions could be operated at the same time during the instruction fetch cycle. In order to reduce the instruction decoding time and the interface time of the data memory interface, an instruction code size was implemented by 32 bits. And the real time debug operation was implemented for easeful debugging the designed processor with a single step run, PC break point run, data memory break point run. Also in this designed microprocessor, pulse instructions, step controllers, master controllers, BM and BCD type arithmetic instructions, barrel shift instructions were implemented for sequence logic control. The FPGA was synthesized under a Xilinx's Foundation 4.2i Project Manager using a V600EHQ240 which contains 600,000 gates. Finally simulation and experiment were successfully performed respectively. For showing good performance, the designed microprocessor for the sequence logic control was compared with the H8S/2148 microprocessor which contained many bit instructions for sequence logic control. The designed processor for the sequence logic showed good performance.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.26 no.11
• /
• pp.1728-1735
• /
• 1989

A design procedure for microstrip bandpass filters using step impedance resonators (SIR's) and tapped input/output to a conventional parallel coupled line bandpass filter is presented. The filter configuration consisting of both half-wavelength and SIR's suppreses to spurious resonance response near the second harmonics, while tapping techniques offer benefit in situations where the impractical. The measured frequency responses of the designed filter are in close agreement with the computed responses.

• Proceedings of the IEEK Conference
• /
• 2003.07a
• /
• pp.246-249
• /
• 2003

본 논문에서는 TCP/IP 기반에서 웨이블릿 변환과 인터넷을 이용 원거리에 있는 Device를 PDA로 제어하는 영상감시 솔루션에 대해 연구하였다. 우선 서버는 카메라를 이용하여 영상을 획득하고 획득한 영상에 대해 2단계 웨이블릿 변환을 한 후, 인터넷을 통해 Client(PDA)로 전송한다. PDA는 수신한 프레임만을 가지고 역 웨이블릿 변환을 하고 사용자에게 영상을 보여주게 된다. 카메라는 스텝 모터와 마이크로프로세서 80C196KC에 의해서 컨트롤되고, 사용자는 서버에서 보내는 영상을 PDA를 이용해서 감시한다. 그리고 PDA를 이용 원거리에 있는 서버 80C196KC에 제어 신호를 보내고 자신이 원하는 영상을 감시할 수 있다.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.278-280
• /
• 2002

Microstep driving method is adopted to reduce the thrust ripple of LPM(Linear Pulse Motor). It controls each phase current to improve the resolution of position. Therefore, the phase current waveform affects the characteristics of LPM in microstep drive. In this paper, the characteristics of LPM was investigated in accordance with phase current waveform.