Proceedings of the Materials Research Society of Korea Conference
/
2003.11a
/
pp.210-210
/
2003
ECR(Electron Cyclotron Resonance)은 전자기장에 의한 회전주파수와 전원으로 가해지는 마이크로웨이브(microwave)의 주파수가 일치할 때 발생하는 공진(resonance)현상이다. ECR에 의해 형성된 고밀도, 고에너지의 플라즈마가 상온하에서도 표면에너지가 낮은 고분자수지상에 접착력과 내구성 및 성능이 우수한 금속박막을 형성시킬 수 있는 특징을 지니고 있다. [1] 이러한 고분자수지 표면에 제조되는 금속박막소재는 반도체산업을 비롯하여, 박막전지, 전자파 차폐 등의 다양한 용도로 개발되고 있다. 그러나, 고분자수지와 금속박막계면간의 접착성의 저하로 후처리 공정에서 외부의 응력을 받게되면 막이 쉽게 탈리되는 문제점이 대두되었고, 이에 대한 개선이 요구되고 있다. 따라서, 본 연구에서는 공업적으로 많이 사용되는 표면 전처리방법을 통하여 구리 박막의 접착력을 향상시키고자 하였다. 상온화학증착 방법에 의해 고분자수지표면에 구리금속박막을 제조하고 여러 가지 표준방법을 사용하여 고분자수지와 구리박막간의 접착특성을 조사하였다.
Journal of the Microelectronics and Packaging Society
/
v.8
no.4
/
pp.59-65
/
2001
Epoxy/$BaTiO_3$composite capacitor films with excellent stability at room temperature, uniform thickness, and electrical properties over a large area ware successfully fabricated. The composite capacitor films with good film formation capability and easy process ability were made from epoxy resin developed for ACF as a matrix and two kinds of $BaTiO_3$powders as fillers to increase the dielectric constant of the composite film. The crystal structure of the powders and its effects on dielectric constant of the films were investigated by X-ray diffraction (XRD). And the optimum amount of dispersant, phosphate ester, was determined by viscosity measurement of suspension. DSC and dielectric property tests were conducted to decide the right curing temperature and the optimum amount of the curing agent. As a result, the capacitors of 7 $\mu \textrm{m}$ thick film with 10 nF/$\textrm{cm}^2$ and low leakage current were successfully demonstrated.
Journal of the Microelectronics and Packaging Society
/
v.22
no.4
/
pp.31-36
/
2015
The demand for multi-functionality, high density, high performance, and miniaturization of IC devices has caused the technology paradigm shift for electronic packaging. So, thermal management of new packaged chips becomes a bottleneck for the performance of next generation devices. Among various thermal solutions such as heat sink, heat spreader, TIM, thermoelectric cooler, etc. on-chip liquid cooling module was investigated in this study. Micro-channel was fabricated on Si wafer using a deep reactive ion etching, and 3 different micro-channel designs (straight MC, serpentine MC, zigzag MC) were formed to evalute the effectiveness of liquid cooling. At the heating temperature of $200^{\circ}C$ and coolant flow rate of 150ml/min, straight MC showed the high temperature differential of ${\sim}44^{\circ}C$ after liquid cooling. The shape of liquid flowing through micro-channel was observed by fluorescence microscope, and the temperarue differential of liquid cooling module was measuremd by IR microscope.
Kim, Dong-Min;Lee, Jun-Seo;Ryu, Byung-Cheol;Chung, Chan-Moon
Journal of the Korean Recycled Construction Resources Institute
/
v.8
no.1
/
pp.129-133
/
2020
The concentration of remaining formaldehyde contained in waste liquid emitted from the process of urea-formaldehyde microcapsule synthesis was analyzed by gas chromatography-mass spectrometry (GC-MS). Three factors that can affect on the reaction of formaldehyde were selected including pH, ammonium chloride input and temperature. The effect of these factors on the concentration of remaining formaldehyde was studied. When ammonium chloride input was 0.025g, microcapsules could not be obtained or core substance leaked out because of weak shell, and therefore this reaction condition would be inadequate. It was confirmed that the concentration of remaining formaldehyde could be minimized when the microencapsulation was conducted at 70℃ and pH 2.5 by using a ammonium chloride input of 0.050g. This study can make contribution to UF microencapsulation in safer working environment.
Kim, W.T.;Lee, K.M.;Song, J.K.;Kim, C.S.;Kim, T.W.
Proceedings of the Korean Society for Agricultural Machinery Conference
/
2017.04a
/
pp.133-133
/
2017
최근 딸기 생산이 확대 되면서, 고품질 다수확이 가능한 딸기 우량묘에 대한 수요가 빠르게 늘고 있으며, 딸기 육묘에 관한 관심이 더욱 늘고 있다. 그러나, 육묘시 작물에 따른 포트 혹은 트레이 선정에 대한 연구는 거의 이루어지지 않고 있다. 또한, 마이크로버블의 세정 능력은 이미 산업현장에서 널리 알려져 있으나 이를 이용한 시스템 개발은 농업분야에서는 미비한 실정이다. 따라서, 딸기 육묘에 적합한 마이크로버블 시스템을 설계하여 실증 개발함으로써 딸기 육묘 농가의 자립능력을 제고하고, 딸기 육묘 생산시스템의 확대 하여 농가소득 증대에 기여하고자 한다. 실험방법은 생육에 적합한 육묘용 트레이를 선정하고, 마이크로 버블 시스템을 적용한 육묘와 기존 방법에 의한 육묘의 비교 실험하였다. 포트의 용량에 따른 뿌린 근부의 성장변화를 관찰하고, SEM 촬영을 통하여 딸기 뿌리근부의 조직의 치밀성을 확인하였다. 기존 저면관수의 경우 딸기탄저병 확산을 억제하지만, 반입에 의한 감염주의 발병을 억제하는 것은 아니다. 따라서 포트 및 트레이를 청결하게 관리할 필요가 있으며 이를 해결하기 위해 미세기포(micro-bubble)를 사용한 클리닝이 상당한 효과가 있는 것으로 확인하였다. 또한 조직의 치밀도을 측정하기 위해 딸기 육묘 조직을 SEM 촬영하여 분석하였으며, 미세기포를 이용한 딸기 육묘 방법이 기존의 딸기 육묘 방법에 비하여 조직이 치밀한 것으로 확인 되었다. 또한 배지량 및 육묘 트레이가 딸기 육묘의 성장에 영향을 미치며 제1액아가 1개밖에 발생하지 않는 포기가 많아지고 '눈 없는 포기'의 발생 현상들이 발생하고 있어 적정 육묘 트레이의 선택 및 배지량 조절하는 비교 실험을 통하여 해결하였다. 본 연구의 결과 개선된 육묘트레이를 사용함으로써 제1액아의 형성이 촉진되어 정과방 후의 제1액과 방의 수확량이 증대한다는 것에 의해서 1월 혹은 2월부터의 수량이 증대되어 소득향상이 기대되며, 마이크로버블을 저면관수에 적용함으로써 트레이의 청결을 유지하여 병해를 예방하고 딸기모종의 조직을 치밀하게 함으로써 딸기의 우량육묘를 얻는데 기여 할 것으로 기대된다.
Effects of continuous oil phase on silver halide nanoparticles were investigated where nanoparticles were prepared using two different types of water-in-oil(W/O) microemulsions containing silver and halide, respectively. Phase behavior experiments for ternary systems containing AOT surfactant, hydrocarbon oil and aqueous solution of an inorganic salt showed that the region of one phase W/O microemulsion was found to be broadened with an increase in the alkyl chain length of a hydrocarbon mainly due to an increase in hydrophilic nature of a surfactant. With the information of phase behavior experiments, silver halide nanoparticles were prepared using different AOT-based microemulsion systems and photomicrographs obtained by transmission electron microscopy indicated that about 10 nm size particles of relatively spherical shape were obtained. It has been found that an increase in alkyl chain length of a hydrocarbon results in a decrease in particle size because of higher intermicellar exchange rate among microemulsion drops. The average particle size was also found to increase with the inorganic salt composition of initial aqueous solution.
Two polymer precursors, polyvinylidene chloride-resin (PVDC-resin) and polyvinylidene fluoride (PVDF), are assembled into the microporous carbon by pyrolysis. Microporous carbon is advantageous as an electrode for supercapacitors that store electric charges through ion adsorption/desorption. The pyrolysis also turns the various heteroatoms of two precursors into functional groups, contributing to the additional charge storage. The analysis of the porous structure and function group during carbonization are important to develop the carbon for energy storage. Here, we analyzed the functional groups of two polymer-derived carbons through X-ray photoelectron spectroscopy. The electrochemical properties of the functional groups were explored in various pH electrolytes. The specific capacitance of two carbons in the acidic electrolyte (1 M H2SO4) was improved compared to that in the neutral electrolyte (0.5 M Na2SO4) due to the faradaic charge/discharge reaction of the quinone functional group. In particular, the carbon electrode derived from PVDC-resin exhibits a lower capacity than the carbon from PVDF due to the small micropores. In the alkaline electrolyte (6 M KOH), the highest specific capacitance and rate capability were obtained among the three electrolytes for both electrodes based on the facile adsorption of the constituent electrolyte ions (K+, OH-).
Journal of the Microelectronics and Packaging Society
/
v.6
no.4
/
pp.15-22
/
1999
Generally, many equipments and a long lead time ale required to manufacture the build-up multilayer board through various processes such as etching, plating, drilling etc. Wet process is suitable for mass production, however it is not adequate for manufacturing prototype in developing stage. In this study, a silk screen printing technology is introduced to make a prototype build-up multilayer board. As for the material photo/thermal curable resin and conductive paste are used for forming dielectric and conductor. And conductive paste fills vias for interconnecting each layer, and also is used for circuit patterning by silk screen technology. Finally, the basic concept and the possibility of build-up multilayer board prototype is proposed and verified as a powerful approach, compared with the conventional processes.
Park, Jae-Hyun;Koo, Young-Mo;Kim, Eun-Kyung;Kim, Gu-Sung
Journal of the Microelectronics and Packaging Society
/
v.16
no.1
/
pp.27-31
/
2009
In this paper, the polymer adhesive bonding technology using wafer-level technology was investigated and warpage results were analyzed. Si and glass wafer was bonded after adhesive polymer layer and dam pattern for uniform state was patterned on glass wafer. In this study, warpage result decreased as the low of bonding temperature of Si wafer, bonding pressure and height of adhesive bonding layer. The availability of adhesive polymer bonding was confirmed by TC, HTC, Humidity soak test after dicing. The result is that defect has not found without reference to warpage.
Proceedings of the Korean Vacuum Society Conference
/
2013.08a
/
pp.234-234
/
2013
VOx 박막은 마이크로볼로미터 적외선 센서의 감지재료로 주로 사용된다. 일반적으로 VOx 박막은 RF sputtering 방법으로 증착이 되며, 이 때 저항 값은 수 kohm~수 Mohm, TCR 값은 -1.5~-2.0%/K까지 다양하게 변화되어 나타난다. 이는 산소의 phase가 여러가지로 변화되기 때문에 재현성이 떨어지는 단점이 있으며, 결정성있는 박막을 증착하기 어려운 문제들이 있다. 본 연구에서는 VOx 박막의 재현성 및 재료의 안정성을 위해 ZnO 물질을 첨가하여 sandwich 구조의 나노박막을 증착하여 산소 열처리를 통해 산소의 phase가 어떻게 변화되는가를 XRD 측정을 통해 조사하였다. ZnO 나노박막을 첨가함으로써 갓 증착되었을 때의 XRD는 V2O5 주된 상을 이루고 있었으며, 산소열처리에 의해 VO2상이 나타남을 알 수 있었다. 또한 V2O5 phase가 표면쪽의 얇은 층에서 주로 나타나고, 중간층은 V2O5와 VO2 phase 가 혼합된 형태로 존재함을 X-ray diffraction 분석을 통해 알 수 있었다. 또한 GIXRD 측정을 통해 깊이에 따른 혼합 phase가 주로 VO2에 의해 형성된 것임을 확인할 수 있었다. 또한 산소열처리의 온도 및 시간에 따라 XRD 특성을 조사하였으며, 최적의 열처리 조건을 XRD 피크를 통해 찾고자 하였다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.