• Title/Summary/Keyword: 마이크로섬유막

Search Result 4, Processing Time 0.018 seconds

SEM 및 AFM을 이용한 한지의 특성 분석

  • 최태호;조남석
    • Proceedings of the Korea Technical Association of the Pulp and Paper Industry Conference
    • /
    • 2000.11a
    • /
    • pp.141-141
    • /
    • 2000
  • 한지의 제조에 있어서 부원료인 점질물은 초지시 매우 중요한 역할을 하는데 그 주된 역 할은 다음과 같다. 먼저 점질물은 섬유의 분산을 용이하게 하고 종이의 강도를 증가시키며, 양지와는 달리 박엽지의 제조가 편리하고, 종이의 경도를 증가시키며, 습지의 처리를 용이하 게 하며, 점성으로 인하여 섬유의 침전올 방지하고, 종이의 광택을 향상시키는 둥 매우 중요 한 역할을 한다. 그러나 한지 제조시 이러한 식물성 점제의 미묘한 작용은 현재 대다수의 한지 제조 공장에서 사용하고 있는 합성점제인 PAM이나 PEO 등의 합성 고분자 화합물에 서는 기대하기 어려운 작용이라 여겨진다. 이와 같은 사실에서 본 연구에서는 전통적인 천 연점질물인 황촉규근의 점질물과 합성점제인 PAM 및 우리 나라에서 전혀 사용되지 않고 있는 나무수국 내수피의 점질물을 이용하여 한지를 제조하고 이들 한지의 특성을 SEM 및 A AFM(Atomic Force Microscopy)를 이용하여 분석하였다. 먼저 각각의 점질물로 제조한 한지를 SEM으로 관찰한 결과 닥나무 인피섬유의 최외층에 투명막이 존재하는 사실을 발견할 수 있었다. 이러한 투명막은 닥나무나 뽕나무 인피섬유에 만 존재하고 삼지닥나무나 산닥나무 둥과 같은 기타 인피섬유에는 존재하지 않으므로 한지 의 원료 섬유의 식별에 매우 중요한 요소가 된다. 또한 이러한 투명막은 섬유간 결합을 증 대시켜 한지의 강도 발현에 기여한다고 사료된다. 천연점질물인 황촉규근과 나무수국 점 질물을 이용하여 제조한 한지를 SEM 및 SEM-EDXA를 이용하여 분석한 결과, 황촉규근 점질물로 제조한 한지에는 상당량의 전분입자가 폰재하고 있었으며 나무수국 점질물로 제 조한 한지에는 침상의 수산칼슐 결정이 상당량 존재하고 있는 사실을 발견하였다. 이러한 사실은 한지 제조시 사용된 점질물의 식별에 중요한 요소라 사료된다. 한지의 원료인 닥나무 인피펄프와 침엽수 미표백 크라프트 펄프를 AFM을 이용하여 분석 한 결과, 닥나무 인피펄프의 마이크로피브릴 폭은 5-10nm로 Sw-UKP의 마이크로피브릴 폭 lO-20nm보다 매우 가늘고, 치밀한 세포벽 구조를 하고 있었다. 닥나무 인피펄프의 이러 한 세포벽 구조 및 마이크로피브렬의 형태가 Sw-UKP보다 높은 섬유강도를 나타내는 원인 이라 사료된다. 각각의 점질물을 이용하여 제조한 한지의 섬유표면을 AFM을 이용하여 관 찰한 결과, 원료펄프의 표면관찰에서와는 달리 초지시 사용된 점질물이 섬유표면을 피복하 고 있어 명확한 형태의 마이크로피브렬을 관찰할 수 가 없었다. 따라서 점질물의 이러한 역 할이 한지의 강도 및 보존성 향상에 기여하리라 사료된다.

  • PDF

Preparation of Polyketone Micro/nanofiber Membrane based on Electrospinning Condition and Its Application in Oil-Water Separation (전기방사법의 제조 조건에 따른 폴리케톤 마이크로/나노섬유 분리막 제조 및 유수 분리 적용)

  • Hou, Jian;Yun, Jaehan;Park, Chanju;Choi, Jinwon;Jeon, Sungil;Lee, Chang Hyun;Byun, Hongsik
    • Membrane Journal
    • /
    • v.31 no.6
    • /
    • pp.426-433
    • /
    • 2021
  • In this study, a novel material polyketone (PK) was chosen and PK micro/nano fiber membranes were fabricated via electrospinning method under various conditions. After that, the potential application in oil-water separation was thoroughly investigated. The surface of microfiber membrane formed under high humidity especially became much rougher than that formed under low humidity. When salt was added to the spinning solution, the diameter of fibers was reduced up to 90% and the nanofiber membranes could be formed. The oil/water emulsions were prepared and separated under gravity condition using the manufactured rPK-LNC and PK-H membranes. The separation characteristics was evaluated by measuring total organic carbon (TOC) and turbidity. Meanwhile, the changes in the physical properties of fiber membranes under various conditions and with or without salt, as well as the changes in oil water separation characteristics were also studied.

Fabrication of Microfibrous Structures with Rolled-Up Forms using a Bilayer Self-Assembly Process (이중층 자가조립 공정을 활용한 롤형태의 생체의료용 마이크로섬유 구조체 제작)

  • Kim, Yeong-Seo;Park, Suk-Hee
    • Journal of the Korean Society of Manufacturing Process Engineers
    • /
    • v.21 no.2
    • /
    • pp.79-86
    • /
    • 2022
  • Numerous fabrication techniques have been used to mimic cylindrical natural tissues, such as blood vessels, tendons, ligaments, and skeletal muscles. However, most processes have limitations in achieving the biomimetic properties of multilayered and porous architectures. In this study, to embrace both features, a novel self-assembly method was proposed using electrospun microfibrous sheets. A bilayer microfibrous structure, comprising two sheets with different internal stresses, was fabricated by electrospinning a polycaprolactone (PCL) sheet on a uniaxially stretched thermoplastic polyurethane (TPU) sheet. Then, by removing the stretching tension, the sheet was rolled into a hollow cylindrical structure with a specific internal diameter. The internal diameter could be quantitatively controlled by adjusting the thickness of the PCL sheet against that of the TPU sheet. Through this self-assembly method, biomimetic cylindrical structures with multilayer and porous features can be manufactured in a stable and controllable manner. Therefore, the resulting structures may be applied to various tissue engineering scaffolds, especially vascular and connective tissues.

Effect of Aster scaber and Ixeris dentata on Contractility and Vasodilation of Cardiovascula and Endothelial Cell in Hyperlipidemic Rat (참취 및 씀바귀 첨가식이가 고지혈증 흰쥐의 심혈관 수축과 이완 및 혈관내피세포에 미치는 영향)

  • Lim, Sang-Sun;Lee, Jong-Ho
    • Journal of the Korean Society of Food Science and Nutrition
    • /
    • v.26 no.2
    • /
    • pp.300-307
    • /
    • 1997
  • The effects of Aster scaber and Ixeris dentata on cadiovascular system in hyperlipidemic rats were examined. Five groups of thirty Sprague Dawley rats were fed with the diet contained 1% cholesterol, 0.25% sodium cholate, 10% coconut oil and 5% lard(control group) for 4 weeks. Each experimental diet group was added with 5% plant powder or extract of the 5% plant powder by dry weight. Contractile or relaxation responses in the isolated artria and thoracic aortae were measured and the morphological changes of the aortic endotherium from the rats fed the experimental diet were inspected. In response to isoproterenol, the number of right atrial spontaneous beat was significantly lower in Cham chyi powder group$(PP_{1})$ and Sumbagui powder group$(PP_{2})$ than control at $10^(-8)M$ concentration. The contraction forces by injection of phenylephrine and calcium in isolated thoracic aorta were significantly low in each experimental groups compared with the control. The relaxation rates by acetylcholine represented comparatively higher value in $PP_{1}$ than control. The morphological changes of endothelial cell surface was a little in $PP_{1}$ and $PP_{2}$ compared with control, while the damages were considerably advanced in Cham chyi and Sumgbagui extract diet group$(PE_{1},\;PE_{2})$.

  • PDF