• Journal of Sensor Science and Technology
• /
• v.8 no.5
• /
• pp.400-406
• /
• 1999

Piezoresistive flow sensors with four different types of microbeam structures were fabricated using (100), n/$n^+$/n three-layer silicon wafer and their characteristics were investigated. Piezoresistors were formed through boron diffusion and its values were about $1\;k{\Omega}$. Three-dimensional silicon microbeams were constructed by porous silicon micromachining and curled microbeams were fabricated by the difference in the thermal expansion coefficient between silicon and metal. The output response of the fabricated sensor was evaluated through half- bridge. The output voltage increased with increasing length of microbeam at the same flow velocity, while the detectable measurement range extended with decreasing length of microbeam. The output voltage of the fabricated sensors were increased with quotient of 3.2 of the flow rate since the stress of the beam versus the gas flow showed non-linear characteristics.

• Proceedings of the KIEE Conference
• /
• 2001.07c
• /
• pp.1612-1615
• /
• 2001

포항 방사광 가속기 2.5 GeV의 전자선형 가속기는 마이크로웨이브 발생원으로써 80 MW 클라이스트론(klystron) 11대와 입사부에 65 MW 클라이스 트론 1대를 사용한다. 전자빔 에너지의 효율적인 제어를 위하여 고출력 클라이스트론의 RF 전력과 입력 빔의 전력을 정확하게 측정해야 하며 응답특성이 양호한 측정장치와 정밀한 측정이 요구된다. 클라이스트론에 공급되는 전력은 캐소드에 인가되는 전압과 전류의 측정치로 계산된다. 비록 빔 전압측정에서의 작은 오차일지라도 클라이스트론 RF 출력 전력의 결과값에 큰 영향을 미친다. 따라서, 빔 전압의 측정시에 정확한 측정을 위하여 특별한 주의가 요구된다. 고전압 펄스전원장치 인 모듈레이터 (modulator)에서 발생되는 수백 kV(350-400 kV)의 전압을 측정하기 위하여 커패시터의 용량비로 입력전압을 분압하는 용량성 분압기(capacitive voltage divider, CVD)가 사용된다. 고압측 분압용 표준 콘덴서의 정전용량을 결정하는 주요인자는 고전압 절연유의 유전율(dielectric constant)이다. 그러므로, 측정범위 내의 전압, 주파수, 온도에 대하여 정전용량의 변화율이 작도록 설계하여야 한다. 본 논문에서는 펄스형 고전압 신호 측정을 위한 용량성 전압 분배기의 측정원리, 설계분석, 교정시험, 절연유의 온도변화에 따른 정전용량 변화 특성에 대한 실험 결과를 고찰하고자 한다.

• Journal of Satellite, Information and Communications
• /
• v.7 no.2
• /
• pp.25-29
• /
• 2012

In this paper, we implemented LED beam forming communication system controlled by stepping motor. ATMega1284 was used as a MCU of main control board which has two main external IO, one is RS232 for connection with PC, the other is PORT for connection with motor driving board. Stepping motor rotated 360 degree when provided 160 clock and its rotation radius was increased by Archimedian Spiral. So LED can provide its light anywhere in the space and its beam forming was controlled by PC connected with RS232 of main control board. The action of beam forming was verified via actual HW/SW implementation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.36 no.10
• /
• pp.1189-1193
• /
• 2012

The Miniaturized Fingerprint Imager (MFI) is a slim optical mouse that can be used as an input device for application to wireless portable personnel communication devices such as smartphones. In this study, we have fabricated key optical components of an MFI, including the illumination optical components and imaging lens. An LED beam-shaping lens consisting of an aspheric lens and a Fresnel facet was successfully machined using a diamond turning machine (DTM). A customized V-shaped groove for beam path banding was fabricated by the bulk micromachining of silicon that was coated with aluminum using the shadow effect in thermal evaporation. The imaging lens and arrayed multilevel Fresnel lenses were fabricated by electron beam lithography and FAB etching, respectively. The proposed optical components are extremely compact and have high optical efficiency; therefore, they are applicable to ultraslim optical systems.

• Journal of the Microelectronics and Packaging Society
• /
• v.3 no.1
• /
• pp.11-24
• /
• 1996

부분압이 다른 여러 가지 반응성 가스분위기하에서 이른곤 이온을 이용하여 PC, PET PMMA 그리고 PTFE 폴리머 표면의 삼차 증류수에대한 진수성을 증대하였다. 폴리머 표면의 친수성의 변화는 여러 가지 반응성 가스 분위기하에서 아르곤 이온의 조사량을 1014 부터 1x1017cm2까지 변화하면서 조사하였다. 접촉감은 아르곤 이온이 조사되는 폴리머 표면 근처에 유입된 가스의 방응성(O2>N2>H2)에 따라 많이 감소하였다, 폴리머 표면에 형성된 친수성기는 XPS Cls, Ols, 그리고 Nls 스펙트럼을 분석하여 확인하였다. 표면 개질된 PC와 PTFE에 대한 Al 금속의 접착력 증대를 Scotch tape와 인장실험을 통하여 확인하였다. 접착 력 증가는 표면 에너지 중 polar force의 증가에 의한 것으로 입증되었다. 에너지를 가진 아 르곤 입자 폴리머 체인 그리고 반응성 가스 사이의 반응기구는 2단계 모델로 설명가능하였 는데 그 기구는 첫 번째 이온의 조사에 의한 불안정한 폴리머 체인의 형성과 두 번째 단계 로 이렇게 형성된 폴리머 체인과 반응성 가스들 사이의 화학반응으로 이루어진다. 질화아루 미늄의 표면을 산소분위기하에서 아르곤 빔을 조사하여 표면개질한후 AlON층이 새롭게 형 성된 것을 XPS를 이용하여 확인할수 있었다. 개질된 질화알루미늄과 구리금속 박막간의 접 착력을 scratch 실험을 통하여 조사하였다.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.3
• /
• pp.51-59
• /
• 2009

The CRT-RSA cryptosystem is very vulnerable to fault insertion attacks in which an attacker can extract the secret prime factors p, q of modulus N by inserting an error during the computational operation on the cryptographic chip. In this paper, after implementing the CRT-RSA cryptosystem, we try to extract the secret key embedded in commercial microcontroller using optical injection tools such as laser beam or camera flash. As a result, we make sure that the commercial microcontroller is very vulnerable to fault insertion attacks using laser beam and camera flash, and can apply the prime factorization attack on CRT-RSA Cryptosystem.

• Nuclear Engineering and Technology
• /
• v.22 no.4
• /
• pp.380-388
• /
• 1990

The MM-22 medical microtron at Korea Cancer Center Hospital is now operational for high energy electron and photon therapy, This microtron is designed to produce 5.3-22.5 MeV electron beams and deliver these to the treatment head through beam transport system with an intensity and stability suitable for cancer treatment. The availability of high quality radiation modalities from the MM-22 shows new possibilities in the treatment of deep seated tumours. Principle of operation, system structures and operating characteristics of the MM-22 are described in this paper.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.05a
• /
• pp.326-330
• /
• 2010

A laser based needle-free liquid drug injection device has been developed. A laser beam is focused inside the liquid contained in the rubber chamber of micro scale. The focused laser beam causes explosive bubble growth, and the sudden volume increase in a sealed chamber drives a microjet of liquid drug through the micronozzle. The exit diameter of a nozzle is 125 ${\mu}m$ and the injected microjet reaches an average velocity of 264 m/s. This device adds the time-varying feature of microjet to the current state of liquid injection for drug delivery.

• Korean Journal of Optics and Photonics
• /
• v.17 no.3
• /
• pp.285-289
• /
• 2006

A novel alignment-free micro-optic MZI filter has been demonstrated. The filter is composed of two fiber-pigtailed collimators and a beam-splittingplate with a periodically etched stripe pattern. We fabricated the plate through a standard lithographic formulation process by using a pyrex substrate glass with SU-8 resist coating on its one of the surfaces. The maximum insertion loss of the implemented filter was less than 2 dB over 1000 nm to 1600 nm and the extinction ratio was larger than 33 dB. The measured PDL within the 3-dB pass band of the filter was less than 0.15dB and the maximum extinction ratio variation was less than 2 dB even when the worst alignment error occured.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.3
• /
• pp.573-581
• /
• 1994

A microstrip antenna having a dual polarization and a smaller size than feed horn polarizer of F.R.R.S(Faraday Rotation Rotary Switch) is designed, in which GaAs MESFET switches are inserted for selective reception of RHCP or LHCP. For an accurate analysis of the resonance frequency, input impedance and radiation pattern of the circularly polarized microstrip antenna, finite difference time domain (FDTD) method is used. When the GaAs MESFET switch in the feeder is ON-stats, the truncated patch antenna has a gain of about 16.6dB including amplifier gain, while the switch is OFF-state, this has a isolation level of -24dB.