• Journal of the Microelectronics and Packaging Society
• /
• v.9 no.4
• /
• pp.25-29
• /
• 2002

We have fabricated a vertical trench Hall device which is sensitive to the magnetic field parallel to the sensor surface. The vertical trench Hall device has been built on SOI wafer which is produced by silicon direct bonding technology using bulk micromachining, where buried $SiO_2$ layer and surround trench define active device volume. Sensitivity up to 150 V/AT has been measured.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2011.10a
• /
• pp.54-55
• /
• 2011

In recently, microstrip antenna has been used to be communication devices through compact size, lightweight, and multi-layered integration. Also miniaturized communication system is expected to be power consumption and cost savings. In this paper, Long-distance communication is possible for the purpose of micro-strip antenna design, and prototype antenna were made and analyzed by using network analyzer.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.05a
• /
• pp.145-146
• /
• 2015

초미세 가공 및 치수안정성 향상을 위한 다이아몬드 마이크로 블레이드의 DLC 코팅이 연삭 과정에서 결합구조가 안정적으로 유지되는지 알아보기 위해 Cu/Sn 금속 결합재에 $MoS_2$ 고체 윤활제를 첨가한 후 PAPVD법으로 DLC 박막을 블레이드의 측면에 증착하였다. 실착 절삭 시험을 위해 마이크로 블레이드 시편을 제조하여 충분한 드레싱 과정 후 절삭 시험을 행하였으며 라만 분광법을 통해 절삭 전후 DLC 코팅에 존재하는 $sp^2$, $sp^3$ 결합의 분율을 조사하고 그 결과를 토대로 DLC 코팅의 특성의 변화를 분석하였다. DLC 코팅에 존재하는 D밴드와 G밴드의 비인 ID/IG는 절삭 후 증가하는 경향을 보였으며 결과적으로 절삭 과정 중 흑연화가 진행되었음을 확인하였다.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.39 no.2
• /
• pp.108-116
• /
• 2002

In this paper, to improve bandwidth of microstrip antenna, we discussed the patch structure using dual patch and probe feed. To provide PCS service and IMT-2000 service simultaneous, a microstrip patch antenna needs impedance bandwidth of 22%. We propose wide-band microstrip path antenna without complexity. To analyze characteristics of microstrip patch antenna, we used Ensemble of commercial software. The microstrip patch antenna was designed, fabricated, and tuned. The result was that 500 ㎒(25.5%) of impedance bandwidth for VSWR 2,430 ㎒(21.9%) of impedance bandwidth for VSWR 1.5. The microstrip patch antenna has side lobe of -14 dB. The front to back ratio is 20 dB overall. The measured gain of the microstrip patch antenna is 5.2 dBi.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.16 no.2
• /
• pp.171-179
• /
• 2017

In this paper, microstrip antenna using multi-layer and folded structure for GPS application is presented for aircraft loading. Existing microstrip patch antenna used dielectric of high specific inductive capacity to miniaturize that cause smaller bandwidth and decline of efficiency due to dielectric loss. To compensate the existing flaws, Rogers TMM 10i(dielectric constant=9.8, loss tangent=0.002) is used for multi-layer dielectric miniaturization, and we construct folded radiating element on the surface of the dielectric applying perturbation effect. The antenna is designed in the bandwidth of GPS $L_1$ band, and the size of the antenna's radiating element is $20.3mm{\times}19.93mm$, and it gets 94.2% miniaturized characteristic of basic ${\lambda}/2$ microstrip patch antenna. Also the measured -10 dB bandwidth is 32.3 MHz(2.05%), 3 dB axial ratio bandwidth is 6.7 MHz(0.43%). Measured radiation patterns was maximum gain of 0.56 dBi at x axis polarization, 1.23 dBi at y axis polarization.

• Proceedings of the KAIS Fall Conference
• /
• 2011.12a
• /
• pp.303-306
• /
• 2011

본 논문에서는 신호의 분리와 합성이 가능한 Diplexer를 제작하였다. 저역 통과 여과기와 고역 통과 여과기의 특성을 정합하여 Diplexer로 구현함으로써 신호의 분리와 합성의 가능성을 입증하기 위해 실제 마이크로스트립구조의 Diplexer를 제작, 측정한 결과...........

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.38 no.12
• /
• pp.39-48
• /
• 2001

We have studied the design of the photonic bandgap (PBG) structure on the microstrip line that can effectively control the fractional bandwidth of the passband formed in the stopband by adding the stub in the cell of the microstrip PBG structure. As the length of the stub increases, the cutoff frequency and the center frequency of the stopband are decreased, while the bandwidth of the stopband is increased. We have also found that the fractional bandwidth of the passband formed in stopband by the introduction of defect decreases as the stub length is increased. These results mean that adding the stub in the normal PBG structure is an effective way to control the fractional bandwidth. As an application example, we have implemented a microwave duplexer using the proposed structure.

• The KIPS Transactions:PartA
• /
• v.13A no.3 s.100
• /
• pp.191-198
• /
• 2006

Today's portable electric consumer devices, which are operated by battery, tend to integrate more multimedia processing capabilities. In the multimedia processing devices, multimedia system-on-chips can handle specific algorithms which need intensive processing capabilities and significant power consumption. As a result, the power-efficiency of multimedia processing devices becomes important increasingly. In this paper, we propose a reconfigurable data caching architecture, in which data allocation is constrained by software support, and evaluate its performance and power efficiency. Comparing with conventional cache architectures, power consumption can be reduced significantly, while miss rate of the proposed architecture is very similar to that of the conventional caches. The reduction of power consumption for the reconfigurable data cache architecture shows 33.2%, 53.3%, and 70.4%, when compared with direct-mapped, 2-way, and 4-way caches respectively.

• Journal of the Microelectronics and Packaging Society
• /
• v.26 no.3
• /
• pp.71-74
• /
• 2019

In this study, we fabricated two standard and inverted quantum dot light emitting diodes (QLEDs) using $TiO_2$ nanoparticles (NPs) with lower electron mobility than ZnO NPs as inorganic electron transport layer to suppress electron injection into the emitting layer. Current density was much higher for the inverted QLEDs than the standard ones. The inverted QLEDs were brighter, but showed low current efficiency due to the high current density. In addition, as the current density was higher, the driving voltage was higher, and the red shift was confirmed in the emission wavelength spectrum. The low current density in the standard structured devices showed that the possibility that $TiO_2$ NPs could suppress the electron injection in the QLEDs.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.21 no.1
• /
• pp.46-52
• /
• 2010

A compact circular microstrip patch antenna with a switchable circular polarization(CP) is proposed at 2.4 GHz. An unequal cross-shaped slot on a ground plane is utilized as a perturbation. By switching pin diodes mounted on the slot, the CP sense of each antenna can be simply switched from left-handed(LH) CP to right-handed(RH) CP vice versa. Since the perturbation can be made on the ground plane and no bias circuit is required on the patch side, the bias circuit has not effect on the main beam radiation. From the experimental results, the impedance bandwidth and CP bandwidth of the proposed antenna have shown up to 150 MHz and 35 MHz, respectively. The peak gain of the proposed antenna is 1.7 dBi for both CP senses.