• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.2
• /
• pp.317-322
• /
• 2015

Recently, due to the variety and complexity of marine electronics communication devices, much research has been done to adopt the novel communication protocol. Among them, NMEA2000 protocol, is adopted as standardized protocol to the next generation ship. In this paper, we design and implement the conversion algorithm for sensor protocol based on NMEA2000, and analog data module which convert data format between NMEA2000, CAN, Ethernet, RS232. The present study was designed to implement user-based data monitoring system by supporting various communication protocols through the development and application of key technologies through NMEA2000.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.13 no.10
• /
• pp.2088-2096
• /
• 2009

This paper deals with hybrid MAC protocol design for underwater acoustic networks. The proposed MAC protocol has the cluster structure with a master node and slave nodes, and the hybrid network structure that combines a contention free period based on TDMA(Time Division Multiple Access) with a contention period. The suggested MAC protocol has a beacon packet for supervising network, a guard period between time slots for packet collision, time tag for estimation of propagation delay with a master node, the time synchronization of nodes, entering and leaving of network, and the communication method among nodes. In this paper, we adapt the proposed hybrid MAC protocol to AUV network, that is the representative mobile device of underwater acoustic network, and verify this protocol is applicable in real underwater acoustic network environment.

• Polymer(Korea)
• /
• v.28 no.5
• /
• pp.374-381
• /
• 2004

Gas permeability of low density polyethylene (LDPE) film containing zeolite powder for $CO_2,\;O_2$ and $N_2$ were investigated. Zeolite powders modified by cations or surfactant were compounded with LDPE to produce $20 wt\%$ masterbatch. After blending the masterbatch with LDPE, zeolite filled films were prepared by the blown film process. Finally, the composite films containing zeolite loadings of 0, 3,5, and $10 wt\%$ were produced. A gas permeability apparatus based on the variable volume principle was designed to analyze the characteristics of films. Experiments showed a general trend that gas permeabilities first decreased and then increased as the zeolite content was increased. Surfactant modified zeolite showed a better interfacial adhesion with the matrix, but the film did not show a discernible difference in gas permeability compared with the other modified films. The difference of temperature dependences in the gas permeabilities of composite films was slightly smaller than that of LDPE film.

• Polymer(Korea)
• /
• v.28 no.4
• /
• pp.305-313
• /
• 2004

A vacuum pressure-difference technique for making a nano-precision replica is investigated for various applications. Master patterns for replication were fabricated using a nano-replication printing (nRP) process. In the nRP process, any picture and pattern can be replicated from a bitmap figure file in the range of several micrometers with resolution of 200nm. A liquid-state monomer is solidified by two-photon absorption (TPA) induced by a femto-second laser according to a voxel matrix scanning. After polymerization, the remaining monomers were removed simply by using ethanol droplets. And then, a gold metal layer of about 30nm thickness was deposited on the fabricated master patterns prior to polydimethylsiloxane molding for preventing bonding between the master and the polydimethylsiloxane mold. A few gold particles attached on the polydimethylsiloxane stamp during detaching process were removed by a gold selecting etchant. After fabricating the polydimethylsiloxane mold, a nano-precision polydimethylsiloxane replica was reproduced. More precise replica was produced by the vacuum pressure-difference technique that is proposed in this paper. Through this study, direct patterning on a glass plate, replicating a polydimethylsiloxane mold, and reproducing polydimethylsiloxane replica are demonstrated with a vacuum pressure-difference technique for various micro/nano-applications.

• Journal of the Korean Society of Surveying, Geodesy, Photogrammetry and Cartography
• /
• v.32 no.4_1
• /
• pp.335-341
• /
• 2014

The main goal of this study is on developing a proper brand-new data of national base map and Data Based(DB) model for new information technology environments. To achieve this goal, we generated a brand-new Hybrid spatial information model which is specialized in the spatio-temporal map structure, the framework map for information integration, and the multiple-layered topology structure. The DB structure was designed to reflect the change of objections by adding a new dimension of 'time' in the spartial information, while the infrastructure was able to connect/converge with other information by giving the unique ID and multi-scale fusion map structure. Furthermore, the topology and multi visualization structure, including indoor and basement information, were designed to overcome limitations of expressing in 2 dimension map. The result from the performance test, which was based on the Hybrid spatial information model, confirms the possibility in advanced national base map and conducted DB model through implementing various information and spatiotemporal connections.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4261-4266
• /
• 2011

Polypropylene (PP)/talc compounds with talc content of 20wt% were fabricated by master-batch (MB) and direct compounding method using injection molding. The MB was prepared by mini compounder at $200^{\circ}C$ and the content of talc was 50wt%. The talc dispersion of the PP/talc compound was investigated by SEM-EDS. The talc was well dispersed within PP matrix in case of the MB-PP compound using MB. The rheological properties of the PP/talc compounds were measured by dynamic Rheometer. The MB-PP compound indicates higher shear thinning and elastic property than direct compound. The disperion of talc was certified by G'-G" plot, and Van Gurp-Palmen analysis was applied in order to certify an increase in elasticity.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.9
• /
• pp.4169-4182
• /
• 2011

Dynamic development of the Information Communications and Technology is changing countries around the world to establish the e-government to enhance their national administrative system efficiently. This paper proposes the method to implement the e-government efficiently in the developing countries. To reach the goal, the e-government development indices evaluated by United Nations are analyzed to catch the clues to take-off the e-government development stage. In addition, we scrutinize the e-Government Master Plans of Mongolia, Kyrgyzstan and Nepal supported by Korea in order to elicit the priority projects which are the indispensible components on the way of building e-government. We cross-check and standardize the projects which the investigation target countries define respectively. We also analyze the projects which are evaluated by their priorities in compliance with the portfolio method to elicit the road map of the optimum which is able to implement the e-government efficiently with reducing trials and errors.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.7
• /
• pp.1289-1295
• /
• 2007

In this paper, we implemented high-performance concurrent control system which manages whole RF systems with digital type and communicates with remote station on both wire and wireless networking. It consists of FPGA (Field Programmable Gate Array) part which controls forward/reverse LPA (Linear Power Amplifier), forward/reverse LNA (Low Noise Amplifier), channel cut wire/wireless TCP/IP, etc, master microprocessor (AVR), which manages the whole control system, Slave microprocessor which communicates SA (Spectrum Analyzer) and observes frequency spectrum of each channel with the resolution of 5KHz, 10 channel card microprocessor which independently observes each channel card and sets frequency synthesizer in channel cut and other peripherals and logics. The whole system is divided to two parts of H/W (hardware) and S/W (software) considering operational efficiency and concurrency, and implementation and cost. H/W consists of FPGA and microprocessor. We expected the optimized operation through H/W and SW co-design and hybrid H/W architecture.

• Journal of agriculture & life science
• /
• v.44 no.4
• /
• pp.57-68
• /
• 2010

The goals of this study were to develop indicators that are able to evaluate the accomplishment of the projects for rural traditional theme villages and make developmental suggestions for a balanced development of rural communities using the indicators. Human, economic, and social factors were selected as the evaluation indicators. The importance of the performance indictors was analyzed by AHP (Analytic Hierarchy Process). The importance of the performance indictors was in the order of satisfaction of inhabitants (150), participation of inhabitants (145), economic effectiveness (123), lodging facilities (101), leader training (96), project cognizanc e(90), etc. As these evaluation methods were applied to the six villages, haebari village came first followed by darangyi village, namsayedam village, mulrebangatteok village and Yedong Mountain fishing village. This study proposed a way of improvement for the balanced development of the rural communities in terms of human, economic and social aspects.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2017.05a
• /
• pp.250-250
• /
• 2017

글로벌 위성 기반의 강수량 관측에 대한 역사는 1979년에 Arkin의 의해 제안된 IR방법에 의해 위성으로부터 강우자료를 유도하는 개념이 도입된 이후 1987년 해양에서의 비교적 정확한 강수량 추정이 가능한 다중 채널의 마이크로파(MW) 복사계를 이용한 방법으로 위성강수 추정에 대한 연구가 활발히 진행되었다. 이후 두 IR과 MW를 혼합한 방법에서, 또다시 1997년 TRMM위성의 PR(Precpipitation Radar)의 레이더를 이용하는 방법, 그리고 2014년 GPM 핵심 위성(GPM Core Observatory)에 탑재된 Dual PR에 의한 방법으로 위성강수의 정확도를 매우 높여가고 있다. 본 연구는 KOICA 사업으로 진행중인 모로코 세부강 유역 홍수방지 마스터플랜 사업에서 모로코 세부강 유역의 2010년 홍수사상에 대한 위성강우 및 지상계측 일일자료를 이용하여 홍수유출량을 추정하는 것으로 목적으로 하고 있다. 모로코 세부강(Oued Sebou) 유역은 모로코의 서북부에 위치하며 유역면적은 한강유역과 유사한 $38,380km^2$이고 하천연장은 450km로 모로코 국토면적의 약 7% 정도를 차지하며 모로코 농업생산의 중심지역이고 유역의 기후 및 기상 특성은 겨울철 온난다습하고 여름에 고온 건조한 지중해성 기후를 나타내며, 연강수량은 400mm이상으로 보고하고 있다(이산 등, 2015). 유역내 49개 관측소의 일일 강우량 자료를 분석한 결과 2000년부터 2010년까지의 유역 산술평균 강수량은 607.1mm/yr로 분석되었고, 2010년 가장 많은 강수를 기록한 지역은 Jbel oudka로 1874.1mm/yr였고, 가장 적은 강수량을 기록한 지역은 Allal Al Fassi - Barrage로 289.9mm/yr로 나타났다. 2010년 홍수가 발생한 시기인 2009년 12월 19일부터 2010년 1월 18일까지의 1시간 간격의 위성강우자료와 1일 관측 지상계측자료를 합성하여 위성보정강우량을 추정하였다. 보정 방법은 순위상관방법을 적용하였다. 사용한 모형은 일본 ICHARM에서 개발한 IFAS와 한국건설기술연구원의 MapWindow 기반 GRM 모형(mwGRM)을 이용하였다. 모형의 적용 결과 세부강 유역 본류의 첨두유출량은 $6,010m^3/s$(mwGRM)과 $5,878m^3/s$(IFAS)로 분석되었다. 향후 위성강우 및 지상계측 강우의 시계열적 정확도와 총강우량 등의 정확도 평가를 수행할 계획이다.