• 드라이브 ㆍ 컨트롤
• /
• 제15권1호
• /
• pp.10-15
• /
• 2018

The hydraulic cylinder seals are used not only to protect leakage of the working fluids but also to prevent incoming of foreign particles into the system. Chromium plating is generally applied to improve corrosion and wear resistance. It has been noticed that sealing surface damage occurs due to the hard foreign/wear particles contained in the hydraulic oil. In this study, a three-bodied sliding contact problem related with a PTFE seal, a spherical particle and chrome-plated steel substrate is modeled to investigate the relations to wear mechanism. Using the nonlinear finite element software, MARC/MENTAT, the deformed shapes, the von Mises and first principal stress distributions with plating thickness were compared. The sealing surface was mainly abraded by hard particles embedded in the seal. The plastic deformation of the steel substrate decreased with thicker plating. Hence it could be more effective to coat the sealing surface of a hydraulic cylinder with a hard material such as TiN, TiC and DLC.

• 한국기계가공학회지
• /
• 제12권6호
• /
• pp.60-68
• /
• 2013

The present research aims to develop aluminum disc brakes to replace existing cast iron disc brakes in automobiles. The foundation for developing an aluminum disc is laid by investigating the performance characteristics of existing cast iron disc brakes and comparing those characteristics with those of aluminum disc brakes. This study involves FEM thermal/structural analysis of disc materials and experimental tests using a brake dynamometer. The results of this study show that, aluminum discs have not only better thermal/mechanical properties than existing cast iron discs, including better heat, wear, and crack resistance, but also that aluminum discs. Weigh less than existing cast iron discs, which results in improved maneuverability. Aluminum discs will become a more essential part of automobiles as electric cars become the major means of transportation.

• 한국자동차공학회논문집
• /
• 제22권7호
• /
• pp.16-22
• /
• 2014

Automotive NVH on brake operation is mainly caused by a coupling action of vehicle speed and inter parts friction and its frequency occurs over a broad band of 0.1 kHz~10 kHz. Especially, squeal noise, being a self-excited vibration generated by friction force between drum and lining, occurs over 1 kHz and consequently dynamic instability is induced when friction energy is applied to a brake vibration system. The squeal strongly depends on nonlinear properties influenced by the material of lining, velocity of vehicle, and the dynamic properties of a brake system. The dynamic properties are considered as a main influential design factor to squeal noise, however the analysis of the properties are rarely facilitated due to arbitrariness of shape by wearing down. In this paper, we research generating tendency of squeal noise through complex eigenvalue analysis, tracking drum brake's unstable modes in accordance with the wear shape of drum and lining such as tapered and bellmouth shape, and analyze computed unstable modes by variable shapes.

• 한국융합학회논문지
• /
• 제7권1호
• /
• pp.177-182
• /
• 2016

중공업과 군사목적으로 사용되는 궤도차량은 고중량의 차체를 버티기 위해 차체에서 전달되는 하중으로 기동륜을 감싸고 있는 링크는 큰 힘을 받게 되는데, 이 발생된 힘은 궤도전체의 내구성 저하를 야기하게 된다. 본 논문에서는 3가지의 상용화된 궤도 패드의 형상들을 가진 모델들을 설계하고, 내구성 저하로 발생될 수 있는 궤도패드의 마모와 링크의 파손을 효과적으로 줄일 수 있는 모델을 고안하였다. 또한 본 연구 결과를 궤도차량 설계에 접목함으로써, 파손방지와 내구성향상을 위한 안전설계에 기여할 수 있으며, 패드 형상의 디자인적인 요소를 융합기술에 접목하여 그 미적인 감각을 나타낼 수 있다.

• Tribology and Lubricants
• /
• 제33권4호
• /
• pp.153-167
• /
• 2017

The aim of this study is to find the change in trend in the eccentricities of two journal bearings supporting the crankshaft of a single cylinder engine and the degree of misalignment of the shaft. We analyze the change in oil film thickness considering the wear scar under mixed-elasto-hydrodynamic lubrication regime at potential wear regions. For this, we first calculate the central eccentricities of the two journal bearings by using the mobility method. Then we calculate the outer end eccentricity by using the geometry of the bearings. Further, the tilting angle and degree of misalignment of the shaft are calculated by using the eccentricities of the two bearings. We show that the eccentricity of bearing #1, on which higher load is applied, increases at the beginning of the start-up cycle and during the coast-down cycle. However, the eccentricity of bearing #2, on which lower load is applied, decreases at the beginning of the start-up cycle and increases during the coast-down cycle. From the results of the analysis of oil film thickness, we show that the mixed-elasto-hydrodynamic lubrication regime for a misaligned shaft is at the initial stages of the start-up cycle for both bearing #1 and #2 and at the final stage of the coast-down cycle for only bearing #1.

• 비파괴검사학회지
• /
• 제22권2호
• /
• pp.193-197
• /
• 2002

레일리 (Rayleigh) 표면탄성파의 속도와 산란의 주파수 의존성을 이용하여 마모로 인해 열화된 AISI 1045강 사편의 깊이방향 잔류응력 분포 (열화 기울기)의 비파괴적인 평가가 시도되었다. 액체/고체 경계면에 초음파가 특정각도로 입사할 때 발생한 표면탄성파의 산란과 복사로 인해 나타나는 후방복사 프로파일의 오른쪽 반치폭과 크기 그리고 발생각으로 잔류응력 분포의 해석도 가능하였으며 평균법에 의한 복사파의 세기 및 스펙트럼의 변화는 잔류응력 분포와 열화로 인해 발생한 미세 결함 밀도과의 연관성을 보여주었다.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.125-140
• /
• 2015

In this paper, we present the results of the wear analysis of journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. We calculate journal bearing wear by using a modified specific wear rate considering the fractional film defect coefficient and load-sharing ratio for the asperity portion of a mixed elastohydrodynamic lubrication (EHL) regime coupled with previously presented graphical data of experimental lifetime linear wear in radial journal bearings. Based on the calculated wear depth, we obtain a new oil film thickness for every crank angle. By examination of the oil film thickness, we determine whether the oil film thickness at the wear scar region is in a mixed lubrication regime by comparing dimensionless oil film thickness, h/σ, to 3.0 at every crank angle. We present the lift-off speed and the crank angles involved with the wear calculation for bearings #1 and #2. The dimensionless oil film thickness, h/σ, illustrates whether the lubrication region between the two surfaces is still within the bounds of the mixed lubrication regime after scarring of the surface by wear. In addition, we present in tables the asperity contact pressure, the real minimum film thickness at the wear scar region, the modified specific wear rate, and the wear angle, α, for bearings #1 & #2. To show the real shape of the oil film at wear scar region, we depict the actual oil film thickness in graphs. We also tabulated the ranges of bearing angles related with wear scar. We present the wear volume for bearings #1 and #2 after one turn-on and turn-off of the engine ignition switch for five kinds of equivalent surface roughness. We show that the accumulated wear volume after a single turn-on and turn-off of an ignition switch normally increases with increasing surface roughness, with a few exceptions.

• Tribology and Lubricants
• /
• 제31권3호
• /
• pp.109-124
• /
• 2015

This paper presents a wear analysis procedure for the journal bearings on a stripped-down single-cylinder engine during start-up and coast-down by motoring. A journal bearing is in the mixed elastohydrodynamic (EHL) lubrication region when the shaft speed is less than the corresponding lift-off speed. Below the lift-off speed, a wear scar can form on bearing surfaces. In part 1 of this paper, we develop the appropriate formulations and the calculation procedure for the analysis. Specifically, we formulate an equation for modified film thickness in a journal bearing considering the additional wear volume. In order to obtain the modified specific wear rate induced by the modified Archard’s wear coefficient, we utilized the extended non-dimensional diagram for the specific wear rate, k, the fractional film defect coefficient, Ψ and the asperity load sharing factor, γ₂. This asperity load sharing factor is newly calculated by setting the Zhao-Maietta-Chang (ZMC) asperity contact pressure equation coupled with the central film thickness equation derived by using the ZMC asperity contact model equal to the modified central contact pressure derived by using the central (or maximum) contact pressure at the dry rough line-contact configuration. We can use the procedure introduced in this paper to determine the lifetime (or longterm) linear wear in radial journal bearings that is a result of repeated stop-start cycles.

• 대한기계학회논문집A
• /
• 제35권2호
• /
• pp.201-206
• /
• 2011

지지격자체는 경수로 핵연료집합체의 특성과 성능에 영향을 주는 가장 중요한 핵심 구조부품 중에 하나이다. 지지격자체 설계시의 우선적으로 고려해야할 사항은 핵연료가 원자로에 장전되어 있는 동안 내내 연료봉이 기계적인 원인에 의해 손상되지 않도록, 즉 연료봉의 기계적 지지건전성이 유지되도록 설계하는 것이다. 연료봉이 유동기인진동에 의해서 진동할 때 연료봉과 연료봉 지지부 사이에서 상대변위 발생을 완화해 줌으로서 연료봉의 프레팅 마모 손상 가능성이 감소될 수 있는 것으로 알려져 있다. 본 연구에서는 이동 가능한 연료봉 지지부로 구성된 새로운 지지격자체 형상을 제안하였고, 제안된 이동 가능 지지부의 연료봉 지지특성을 유한요소해석을 통해 분석하였다.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2004년도 추계학술대회
• /
• pp.114-117
• /
• 2004

The purpose of this study is to investigate geometric effect on the contact stress at a lip seal. The geometries of interest were angle, thickness of lip seal and width of contact surface. The contact stress was calculated by using a coupled thermo-mechanical analysis method. The friction thermal load between lip seal and sleeve was adopted to design load. Based on the FEA results, design variables for controlling the maximum contact stress at the lip seal were identified.