• Korean Journal of Materials Research
• /
• v.24 no.5
• /
• pp.243-248
• /
• 2014

Silicon-carbon composite was prepared by the magnesiothermic reduction of mesoporous silica and subsequent impregnation with a carbon precursor. This was applied for use as an anode material for high-performance lithium-ion batteries. Well-ordered mesoporous silica(SBA-15) was employed as a starting material for the mesoporous silicon, and sucrose was used as a carbon source. It was found that complete removal of by-products ($Mg_2Si$ and $Mg_2SiO_4$) formed by side reactions of silica and magnesium during the magnesiothermic reduction, was a crucial factor for successful formation of mesoporous silicon. Successful formation of the silicon-carbon composite was well confirmed by appropriate characterization tools (e.g., $N_2$ adsorption-desorption, small-angle X-ray scattering, X-ray diffraction, and thermogravimetric analyses). A lithium-ion battery was fabricated using the prepared silicon-carbon composite as the anode, and lithium foil as the counter-electrode. Electrochemical analysis revealed that the silicon-carbon composite showed better cycling stability than graphite, when used as the anode in the lithium-ion battery. This improvement could be due to the fact that carbon efficiently suppressed the change in volume of the silicon material caused by the charge-discharge cycle. This indicates that silicon-carbon composite, prepared via the magnesiothermic reduction and impregnation methods, could be an efficient anode material for lithium ion batteries.

• Journal of Welding and Joining
• /
• v.31 no.2
• /
• pp.26-29
• /
• 2013

The latest research & development trend on friction stir welding and friction stir processing technologies presented in the international symposium, 'Friction Stir Welding & Processing VII'. Papers and presentations about high temperature materials such as advanced high strength steel, stainless steel and titanum alloy shoot up this year. Papers on modeling of metal flow and control of process parameters also increased. The FSP technologies for manufacturing of carbon materials reinforced metal matrix composites were reported, too.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2017.05a
• /
• pp.163-163
• /
• 2017

철강재는 대량 생산이 가능하여 경제성이 뛰어나고 기계적 성질도 우수하여 다양한 산업 분야에서 널리 사용되고 있다. 그러나 철강재는 부식 환경에 취약하기 때문에 그 용도에 따라 다양한 내식성을 부여하는 표면처리를 적용하고 있다. 이러한 철강재에 대한 내식성 표면처리로는 용융아연도금(HDG)과 용융알루미늄도금(HDA)이 우수한 내식성과 다양한 특성으로 널리 사용되고 있으며 아연과 알루미늄을 접목시킨 갈바륨(GL)도금 또한 우수한 내식성 코팅으로 알려져 있다. 또한 최근에는 기존 용융아연도금에 알루미늄(Al) 과 마그네슘(Mg)을 첨가한 3원계 도금강판이 개발되어 기존 용융도금강판 대비 고내식 코팅으로 알려져 있으며 그 적용은 점차 확대되고 있는 추세이다. 일반적으로 이와 같은 강판소재의 내식성 평가에 대해서는 실제 사용할 환경에 폭로하여 비교-시험 하는 것이 가장 확실하고 신뢰도가 높은 방법이다. 그러나 이러한 방법은 경우에 따라 수년에서 수십년에 이르는 장시간이 소요된다. 그러므로 이 방법을 대체하기 위한 각종 가속적 부식 시험들이 널리 적용되고 있다. 즉, 그 목적이나 용도에 따라 염수분무(SST), 침지(Immersion) 및 전기화학적 분극(Polarization) 등 실내에서 부식 시험 하는 방법이 사용되고 있다. 한편, 이러한 부식 가속 시험들은 실제 외부에서 폭로 시험한 결과와의 상관성이 불명확한 경우가 많아 종종 해석에 어려움을 갖고 있는 실정이다. 또한 이 시험 방법들은 동일 재료를 시험하더라도 시험방법의 차이에 따라 부식요인이나 해석방법이 다르므로 인해 그 내식성 결과가 다르게 나타날 수 있다. 그 중 시험목적에 따라 전기화학적 분극 또는 임피던스 분광법(EIS)과 건조 및 습윤 등의 부식 환경 인자들을 적용한 복합부식시험(CCT) 방법은 근사한 대안으로 주목받고 있다. 하지만 이들 시험 또한 실제 부식 환경과는 여러 환경 및 요인들이 다르기 때문에 그 시험방법에 따라 목적하는 시험 결과가 상이하게 나타날 수 있어 해석-평가 하기에 종종 곤란을 갖는다. 이에 따라 최근에는 재현성이 우수하고 실제 부식 환경을 유사하게 모사할 수 있는 내식성 시험과 해석-평가에 대한 내용이 주요한 과제로 사료되고 있다. 본 연구에서는 다양한 내식성 코팅 강판소재들에 대하여 염수분무(SST), 복합부식(CCT), 갈바닉 시험, EIS 시험을 통하여 부식시험 종류 및 시험 환경, 코팅 소재 별 부식경향을 비교-분석하고자 하였다. 또한 이들 부식 진행과정에서는 미세구조관찰(SEM), 결정구조 분석(XRD) 및 원소조성 분석(EPMA)을 통해 다양한 조건에 따른 강판소재들의 부식경향을 비교-평가하고, 실제 환경과의 상관성 및 가속관계를 도출하고자 하였다.

• Journal of Korean Society for Atmospheric Environment
• /
• v.12 no.3
• /
• pp.255-262
• /
• 1996

This study was carried out to investigate the effects of soil fertilizers on wax content, contact angle, mineral nutrient content of Japanese red pine (Pinus densiflora Sieb, et Zucc.) leaves and soil acidity of Japanese red pine communities in Namsan and Kwangnung to see whether they can recover forest decline. Japenese red pine communities were treated with $Ca(OH)_2$, $Mg(OH)_2$, $Ca(OH)_2+Mg(OH)_2$+C.F.(compound fertilizer) in a randomized complete block design with 3 replication from November, 1990 through October, 1993. Wax content, contact angle value and mineral nutrient content of Japanese red pine leaves and soil pH of communities were measured and the results obtained are as follows: 1. Contact angle value and wax content of Japenese red pine leaves increased when the fertilizers were applied in soil. The order leaves grew, the smaller their contact angle values. 2. K and Ca contents of Japanese red pine leaves were higher in Namsan than in Kwangnung, whereas Mg content was higher in Kwangnung. K and Mg contents of the leaves increased with fertilization both in Namsan and Kwangnung. 3. Soil acidity of pH 4.2 ~ 4.3 was shown in Namsan and pH 4.6 ~ 4.9 in Kwangnung. No acidity changes were shown when the fertilizers were applied in soil. However with the lapse of the soil fertilizer application time, there was the indication that soil pH became higher in the fertilizer treatments than in the control.

• Korean Journal of Agricultural Science
• /
• v.25 no.2
• /
• pp.160-167
• /
• 1998

This study was carried out to estimate the effect of NPK fertilization on tree seedling growth and chemical properties of soil. Seedlings of Betula platyphylla var. japonica and Fraxinus rhynchophylla were planted in May 1998 in the nursery at Gariwang mountain, Kangwondo, and seven NPK fertilizer plots(4, 12, 28, 60, 124, 252, and $508g/m^2$) and one non-fertilized plot were used to meet the study objectives. Seedlings of Pinus koraiensis and Acer mono were planted in April 1998 in plastic pots of nursery at Chungnam National University, and seven NPK fertilizer plots(0.5, 1.5, 3.5, 7.5, 15.5, 33.5 and 63.5g) and one non-fertilized plot were used to meet the study objectives. To estimate the relative growth ratios of the seedlings, height and root collar diameter of the seedlings were measured after planting and also in October 1998. Soil samples were collected in October 1998 from the nursery of Gariwang mountain and the plastic pot of the nursery of Chungnam National University. The relative growth ratios of height and root collar diameter in Betula platyphylla var. japonica, Fraxinus rhynchophylla and Acer mono were greater in all fertilized plot than non-fertilized plot, but there was no difference in relative growth ratio of height and root collar diameter of Pinus koraiensis between the fertilized and non-fertilized plots. NPK fertilization increased soil P and K, decreased exchangeable Ca and Mg, and base saturation, and pH. Fertilization resulted in no difference in total soil N between the fertilized and non-fertilized plots of nursery of Gariwang mountain, but increased in total soil N in plastic pots. Fertilization increased the growth of hardwood species and had changed soil chemical properties of this fertilizer trials.