• The Transactions of the Korean Institute of Electrical Engineers C
• /
• v.50 no.10
• /
• pp.494-499
• /
• 2001

The effects of accelerated Ultraviolet (UV) radiation on High temperature vulcanized (HTV), Room temperature vulcanized (RTV) silicone rubber and two types of ethylene propylene diene terpolymer (EPDM) used for composite insulator were investigated by hydrophobicity class (HC), surface voltage decay after corona charging, SEM-ES, FTIR and XPS. The contact angle in two kinds of silicone rubber was scarcely change, but EPDM occurred to the loss of hydrophobicity followed by surface cracking and chalking. The surface voltage decay on UV-treated silicone rubber and EPDM showed a different decay trend with UV treatment. EDS and XPS analysis indicated that the oxygen content increased with UV treatment time in all samples. For silicone rubber, the oxidized groups of inorganic silica-like structure increased with UV treatment time. The oxidized carbon of C=O, O=C-O in EPDM increased. These oxidized surface for each material had different electrostatic characteristics, so deposited charges were expected to have different impacts on their surface hydrophobicity. The degradation mechanism based on our results was discussed.

• Journal of Advanced Marine Engineering and Technology
• /
• v.36 no.2
• /
• pp.315-320
• /
• 2012

Generally circuit devices of low voltage are as follows, ICCB, PCB and MCCB. Among them, MCCB is typically used because it has superior characteristics which fuses do not possess, such as safety, controllability and ability to collaborate with other devices. The MCCB plays vital role, it has to trip instantaneously when the fault is occurred as well as it must have high insulation capacity. Therefore in order to enhance the breaking capacity, the study of contact construction, contact tip and link are necessary. This paper shows dynamic modeling of mechanism part of MCCB using an exclusive analysis program, and embodies the research of improvement of mechanism performance.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.6 no.1
• /
• pp.196-204
• /
• 1998

For the experimental measurement of instantaneous surface temperature of the piston of the DI mono cylinder diesel engine, the instantaneous temperature proves, data acquisition system, and grass-hopper type linkage system were developed. The instantaneous temperatures on the piston bowl, crown, lands and skirt were measured and analyzed, and the following conclusions were derived ; (i) The crank angle for the maximum instantaneous temperature during one cycle varies and moves back and forth by the measuring positions and engine speeds. (ii) The engine speeds, the positions of the measuring points and the cooling water temperature had an effect on the instantaneous temperature amplitude. (iii) The instantaneous temperature suing phenomena appeared on the temperature profiles of the piston crown, top and second land of ring, but on the temperature profiles of the parts of the third land of the fing and skirt, they didn't appear, (iv) The isothermal lines in the piston were acquired through the operation of the finite elements method using the measured temperatures as the boundary conditions.

• 한국정보통신설비학회:학술대회논문집
• /
• 2002.08a
• /
• pp.39-42
• /
• 2002

RS-232C는 정보기기들을 연결하는 직렬통신 표준으로, 간단한 구조로 인해, 복잡한 요구 조건이 없는 상용 기기들의 제어 및 감시용으로 사용되고 있다. 최근 무선동신기술이 발전함에 따라, 저가격의 무선통신 기술을 활용하여 무선 RS-232C에 대한 요구가 늘어나고 있다. 무선 RS-232C로 기존 유선의 RS-232C를 대체함으로서, 기존 시스템의 변경없이 편리한 접속기능을 대체한 수 있을 것이다. 본 논문에서는 유선 RS-232C를 대체하는 무선 RS-232C 모듈을 채용하여, 전력제어에 사용하는 배전자동화 장치의 관리를 간편하게 하는 시스템의 구현에 대해서 다루고 있다. 배전 자동화시스템은 일종의 SCADA시스템의 일부로서, 통신 프로토콜로서 산업용 DNP3.0을 사용하고 있다. 무선 RS-232C 링크의 신뢰성을 확보하기 위하여, 무선 구간에 DNP3.0을 채택하였으며, 무선 통신방식으로는 무선 RF, 블루투스(Bluetooth), 무선랜(wireless LAN)등 3가지 방식을 채용하여, 설계, 구현내용을 기술하였다.

• Convergence Security Journal
• /
• v.16 no.7
• /
• pp.159-165
• /
• 2016

Through the NFV (Network Function Virtualization), companies such as network service providers and carriers have sought to dramatically reduce CAPEX / OPEX by improving the speed of new service provisioning and flexibility of network construction through the S/W-based devices provided by NFV. One of the most important considerations for establishing an NFV network to provide dynamic services is to determine how to dynamically allocate resources (VNFs), the basic building blocks of network services, in the right place. In this paper, we analyzed the latest research trends on VNF node, link allocation, and scheduling in nodes that are required to provide arbitrary NS in NFV framework. In this paper, we also propose VNF scheduling problems that should be studied further in RA (Resource Allocation).

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.16 no.7
• /
• pp.1416-1427
• /
• 2012

This paper proposes a design technique of a survivable ship backbone network, which describes a near optimal configuration scheme of physical and logical topologies of which the survivable ship backbone network consists. We first analyze and present an efficient architecture of a survivable ship backbone network consisting of redundant links and ship devices with dual communication interfaces. Then, we present an integer linear programming-based configuration scheme of a physical topology with regard to the proposed ship backbone network architecture. Finally, we present a metaheuristic-based configuration scheme of a logical topology, underlying the physical topology.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.34 no.4A
• /
• pp.309-315
• /
• 2009

Wireless Ad-hoc networks are dynamic networks that consist of mobile nodes. Nodes in Ad-hoc networks are usually laptops, PDAs or mobile phones. These devices feature Bluetooth and/or IEEE 802.11 (WiFi) network interfaces and communicate in a decentralized manner. Due to characteristics of Ad-hoc networks, Mobility is a key feature of routing protocol design. In this paper, we present an enhanced routing maintenance scheme that cope with topology changes pre-actively. The key feature of the proposed scheme is to switch next-hop node to alternative neighbor node before link breakage for preventing route failure. From extensive experiments by using NS2, the performance of the proposed scheme has been improved by comparison to AODV protocol.

• The Transactions of the Korean Institute of Electrical Engineers
• /
• v.38 no.7
• /
• pp.524-538
• /
• 1989

A new bilateral series resonant inverter and its control method are proposed. The proposed inverter consists of zero current switched cycloconverter. Output voltage is regulated by modulating the average magnitude of resonant current sinusoidally. Cycloconverter synthesizes low frequency output voltage from high frequency resonant current pulses. In the proposed inverter, bidirectional power flow in possible and isolation transformer is miniaturized. The proposed control method is verified through simulation and experiment. The proposed inverter will satisfy the small size and low cost requirements of small Uninterruptible Power Supply (UPS) of less than 1 KVA suitable for micro-computers and electronic equipments used in office and home automation.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2000.10b
• /
• pp.1267-1270
• /
• 2000

위성통신 시스템은 기존의 지상망이나 광 케이블 기술에 비해 통신 대역폭의 유연성과 다중 접속능력, 이동통신, 광역성, 멀티포인트 및 브로드캐스팅 등의 본래의 특징으로 인해 초고속정보통신망 구축에 중요한 역할을 하게 된다. 특히 OBP (On-Board Processing) 기술을 적용하면 기존 위성통신 탑재장치의 수동적인 중계 기능 이외에 복조/재변조, 부호/복호화 및 오류정정, 중계기 및 빔간의 상호 연결/절체 등의 새로운 기능이 추가되어 능동적인 중계를 가능하게 함으로써 통신 품질의 향상, 통신 링크의 전송 효율 개선, 전송 용량 증대 등의 장점을 갖고있다. OBP 탑재 위성 B-IDSN 중계망은 하나의 거대한 가상 ATM 교환기로 간주되고, 여러중계 지구국들중 목적 중계 지구국으로 패킷들을 직접 라우팅 할 수 있는 장점이 있다. 본 논문은 OBP 탑재 위성 B-ISDN 연동 프로토콜 연구를 수행하는 것으로서, 위성 B-ISDN 구조와 각 지구국별 신호 기능 및 B-IDSN 신호 시스템인 DSS2 계층 3 신호 프로토콜, B-ISUP 프로토콜, S-BISUP 프로토콜의 구조를 분석하였다. 또한 점-대-다지점을 위한 B-ISDN의 연결과 소유권 및 각각의 프로토콜에 대한 메시지와 프리미티브를 정의하여, 이를 토대로 OBP 탑재 위성 B-IDSN 연동 프로토콜의 기본 호 처리 절차를 설계 및 구현하고, 이를 테스트하였다.

• Annual Conference on Human and Language Technology
• /
• 1993.10a
• /
• pp.59-70
• /
• 1993

개인용 컴퓨터가 많이 보급되고, CD-ROM과 같은 대용량의 기록장치가, 널리 퍼지면서, 전자화된 사전이 널리 사용되게 되었다. 그러나 이러한 전자사전들은 대개 매우 단순화된 탐색기능만을 제공하므로, 전자화의 잇점을 크게 살리지 못하고 있다. 따라서, 컴퓨터의 힘을 빌린, 보통의 종이로된 사전보다 훨씬 유용한 전자사전을 생각해 볼 수 있을 것이다. 이러한 노력이 과거 80년대 말에 하이퍼텍스트로 시작되어 이제는 매우 상업적인 곳에까지 사용되어지고있다. 국내에서도 전자사전의 개발은 다양하게 진행되어오고 있으나, 대부분 컴퓨터를 위한 사전, 다시 말하면, 빠른 접근시간, 적은 메모리사용만을 고려한 사전에 그치고 있다. 본 논문에서는 이러한 필요성에 부합하여, 백과사전자료를 가지고 사람을 위한 전자백과사전을 개발하는 방법을 소개한다. 특히, 이러한 개발과정을 자동화 할 수 있음을 보이고, 백과사전을 하이퍼텍스트로 자동변환하는 방법을 자세히 기술한다. 이 방법은 원시 자료를 하이퍼텍스트로 변환하기 좋은 정형화된 중간자료로 바꾸고, 이 중간자료와 기초적인 명사추출 알고리즘을 이용하여, 각 노드들 사이에 링크를 만드는 것이다. 또한, 이 방법을 이용하여 개발한 HE(Hypertext Encyclopedia) 시스템을 소개한다.