• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.26 no.1
• /
• pp.1-7
• /
• 2013

Structural design and analysis of a coiling arm unloading machine for submarine cable have been originally conducted in this study. Three-dimensional CAD modeling process is practically applied for the structural design in detail. Finite element method(FEM) and multi-body dynamics(MBD) analyses are also used to verify the safety and required motions of the designed coiling arm structure. The effective moving functions of the designed coiling arm with respect to rotational and radial motions are achieved by adopting bearing-roller mechanical parts and hydraulic system. Critical design loading conditions due to its self weight, carrying cables, offshore wind, and hydraulic system over operation conditions are considered for the present structural analyses. In addition, possible inclined ground conditions for the installation of the designed coiling arm are also considered to verify overturn stability. The present hydraulic type coiling arm system is originally designed and developed in this study. The developed coiling arm has been installed at a harbor, successfully tested its operational functions, and finished practical unloading mission of the submarine cable.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.28 no.6
• /
• pp.635-643
• /
• 2015

In this study, the experimental test results are given to confirm the control efficiency of the linear control algorithm used for designing the active mass dampers(AMD) which are supposed to be installed at Incheon international airport control tower. The comparison between the results from test and numerical analysis is conducted and it was observed that the AMD showed the control performance expected by the numerical model. The effects of the gain scheduling and constant-velocity signal added to the control signal calculated by the algorithm is identified through the observation that the AMD always show behavior within the given stroke limit without any loss of the desired control performance. The phase difference between the accelerations of the structure and the AMD were almost close to 90 degree, which implies that the AMD absorbed the structural energy effectively.

• Journal of KIISE:Computer Systems and Theory
• /
• v.27 no.8
• /
• pp.691-700
• /
• 2000

The standard volume ray-tracing, optimized with octree, needs to repeatedly traverse hierarchical structures for each ray that often leads to redundant computations. It also employs the expensive 3D interpolation for producing high quality images. In this paper, we present a new ray-casting method that efficiently computes shaded colors and opacities at resampling points by traversing octree only once. This method traverses volume data in object-order, finds resampling points on slices incrementally, and performs resampling based on 2D interpolation. While the early ray-termination, which is one of the most effective optimization techniques, is not easily combined with object-order methods, we solved this problem using a dynamic data structure in image space. Considering that our new method is easy to implement, and need little additional memory, it will be used as very effective volume method that fills the performance gap between ray-casting and shear-warping.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.279-279
• /
• 2011

나노 입자를 이용한 비휘발성 메모리 소자의 전기적 특성 향상을 위하여 일함수가 Si 보다 큰 금속, 금속산화물, 금속 실리사이드 나노입자를 이용한 다양한 형태의 메모리 구조가 제안되어져 왔다.[1] 특히 이와 같은 나노 부유 게이트 구조에서 터널 절연막의 구조를 소자의 동작 속도를 결정하는데 이는 터널링 되어 주입되는 전자의 확률에 의존하기 때문이다. 양자 우물에 국한된 전하가 누설되지 않으면서 주입되는 전자의 터널링 확률을 증가시키기 위하여, dielectric constant 와 barrier height를 고려한 다양한 구조의 터널 절연막의 형태가 제안 되었다.[2-3] 특히 낮은 전계에서도 높은 터널링 확률은 메모리 소자의 동작 속도를 향상시킬 수 있다. 본 연구에서는 n형 Si 기판위에 Si3N4 및 HfAlO를 각각 1.5 nm 및 3 nm 로 atomic layer deposition 방법으로 증착하였으며 3~5 nm 지름을 가지는 $TiSi_2$ 및 $WSi_2$ 나노 입자를 형성한 후 컨트롤 절연막인 $SiO_2$를 ultra-high vacuum sputtering을 사용하여 20 nm 두께로 형성 하였다. 마지막으로 $200{\mu}m$ 지름을 가지는 Al 전극을 200 nm 두께로 형성하여 나노 부유 게이트 커패시터를 제작하였다. 제작된 소자는 Agilent E4980A precision LCR meter 및 HP 4156A precision semiconductor parameter analyzer 를 사용하여 전기용량-전압 및 전류-전압 특성분석을 하여 전하저장 특성 및 제작된 소자의 터널링 특성을 확인 하여 본 연구를 통하여 제작된 나노 부유 게이트 커패시터 구조가 메모리 소자응용이 가능함을 확인하였다.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.36 no.3
• /
• pp.225-230
• /
• 2016

Fiber Bragg grating (FBG) sensors are currently the most prevalent sensors because of their unique advantages such as ease of multiplexing and capability of performing absolute measurements. They are applied to various structures for structural health monitoring (SHM). The signal characteristics of FBG sensors under thermal loading should be investigated to enhance the reliability of these sensors, because they are exposed to certain cyclic thermal loads due to temperature changes resulting from change of seasons, when they are applied to structures for SHM. In this study, tests on specimens are conducted in a thermal chamber with temperature changes from -$20^{\circ}C$ to $60^{\circ}C$ for 300 cycles. For the specimens, two types of base materials and adhesives that are normally used in the manufacture of packaged FBG sensors are selected. From the test results, it is confirmed that the FBG sensors undergo some degree of compressive strain under cyclic thermal load; this can lead to measurement errors. Hence, a pre-calibration is necessary before applying these sensors to structures for long-term SHM.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.36 no.1
• /
• pp.49-56
• /
• 2023

With the development of technology worldwide, bridges are becoming larger, and the number of old bridges is also rapidly increasing. Monitoring the structural health of large, aging bridges is essential to preventing large-scale accidents. In this study, the application of a LoRa low-power wide-area network (LPWAN)-based wireless measurement system was investigated, and a LoRa wireless measurement system was established in the cable-stayed bridge section of Cheonsa Bridge, located in Shinan-gun, Jeollanam-do, Korea. The applicability of the LoRa LPWAN-based wireless monitoring system to large marine bridges was reviewed by comparing the performance and economic feasibility with wire-based monitoring systems that were built and operated by establishing a measurement system for the pylons, cables, and reinforcing girders of the bridge.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.34 no.4
• /
• pp.183-189
• /
• 2021

In recent years, active research has been devoted toward developing a monitoring system using ambient vibration data in order to quantitatively determine the deterioration occurring in a structure over a long period of time. This study developed a low-cost edge computing system that detects the abnormalities in structures by utilizing the dynamic characteristics acquired from the structure over the long term for ensemble learning. The system hardware consists of the Raspberry Pi, an accelerometer, an inclinometer, a GPS RTK module, and a LoRa communication module. The structural abnormality detection afforded by the ensemble learning using dynamic characteristics is verified using a laboratory-scale structure model vibration experiment. A real-time distributed processing algorithm with dynamic feature extraction based on the experiment is installed on the Raspberry Pi. Based on the stable operation of installed systems at the Community Service Center, Pohang-si, Korea, the validity of the developed system was verified on-site.

• Journal of the Korean Society for Library and Information Science
• /
• v.54 no.2
• /
• pp.197-223
• /
• 2020

In this study, citation-weighted author profiling (CWAP) was developed as a new method that combines the advantages of both author profiling (AP) method and author co-citation analysis (ACA) method. In AP method, words reflect the author's main topics of study. On the other hand, what words reflect in CWAP is topics that the author mainly influences. This enables detailed topic identification, which is the advantage of AP method, and at the same time determines the subjects in which the author has influence, as with ACA method. The proposed CWAP method was applied experimentally to analyze the intellectual structure of school library research in Korea. The results of the trial application revealed in detail what topics each author has a high influence on, and the change of influence over time was also clearly revealed. The CWAP method proposed in this study is expected to be used as a technique to grasp detailed topics from the viewpoint of research influence on which topics the author has been cited for, not as a research productivity perspective of how many papers the author has published.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2004.10a
• /
• pp.415-418
• /
• 2004

컨텍스트 인식은 유비쿼터스 컴퓨팅 환경에서 사용자의 주변환경과 상태에 따라 양질의 서비스를 제공할 수 있는 중요한 요소이다. 컨텍스트 인식을 위한 정보 수집 도구로는 이동이 편리한 소형 모바일 장치와 그 안에 내장된 모바일 에이전트를 이용하고 있다 현재 모바일 에이전트는 각 사용자의 컨텍스트 정보를 수집하고 인식하는데 많은 시간과 비용이 소모되고 있다. 이에 모바일 에이전트의 부하를 줄이고, 빠른 시간내에 사용자의 컨텍스트 정보 인식을 위한 구조에 대한 연구가 필요하다. 본 논문에서는 모바일 에이전트에 협력적 필터링 기법과 P2P 에이전트를 혼합한 P2P 모바일 에이전트 구조를 제안한다. 제안한 구조는 동일 지역내에서 각 사용자의 컨텍스트 정보를 분석하고 비슷한 선호도를 갖는 사용자들로 그룹핑하며, 그룹핑된 사용자는 P2P 모바일 에이전트를 이용하여 정보를 공유한다. 또한 이 구조는 사용자들의 행위와 서비스를 지속적으로 관찰 및 학습하여 새로운 상관 관계를 측정하도록 하였다.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2010.04a
• /
• pp.666-669
• /
• 2010

여러 가지 지하시설물 중 국가 주요 자원의 수송망을 책임지는 주요구조물인 수도관, 가스관등의 배관구조물은 접근이 쉽지 않은 지하공간에 복잡하게 연결되어 있어 그 중요성에 비해 유지, 관리, 보수가 쉽지 않았다. 이러한 배관구조물을 균열, 조인트 풀림 등의 손상으로부터 보다 안전하고 효율적으로 관리하기 위하여 상시적 배관구조물 손상진단기법을 연구하였다. 이를 위해 배관 구조물 시험체에 볼트풀림, notch 등과 같은 손상에 대하여 대표적인 압전센서인 PZT와 MFC를 부착하고 임피던스기법 및 유도 초음파기법을 적용하여 볼트풀림개수, notch 손상개수 증가에 따른 출력신호를 반복 계측하였다. 객관적인 평가를 위해 계측된 신호를 신호처리기법인 웨이블렛 변환을 수행하고, RMSD 및 1-CC의 손상지수를 사용하여 구조물손상을 정량화 시켰으며 이를 토대로 구조물의 건전성의 기준이 되는 임계값을 설정함으로서 임피던스와 유도초음파 두 검색기법을 이용한 상시적 배관구조물 건전성 모니터링의 가능성을 살펴보았다.