• The Journal of the Korea Contents Association
• /
• v.15 no.7
• /
• pp.106-116
• /
• 2015

Recently, growing up in social and economic development, the lifestyle of Koreans brought many changes in the form of leisure activity and influenced a lot in leisure. In particular, the establishment of the five-day work week increased the leisure time and became popular with family activities. Accordingly, the base of the leisure population expanding, people have an interest in the new way of leisure and the desire is increasing. Camping culture that increasingly take place in the tent camping now is changing into a cultural center to enjoy the camping SUV vehicle. The desire of consumers for the design of the unique exterior and interior caravan increasingly appearing as a major requirement. In this study, we propose a caravan design development strategies to meet the needs of such customers. First analyzes the hypothesis set and to identify the Overview of the caravan, and optimization of use and the problem of the user. Proceed with the design map analysis through classification of the caravan design registered in the KIPO, and proceed to the market research and patented technology to identify and to proceed with the caravan design development strategies for the various products.

• Korean Journal of Veterinary Service
• /
• v.41 no.3
• /
• pp.211-216
• /
• 2018

Heat stroke in a dog is a life-threatening syndrome characterized by a high body temperature over $41^{\circ}C$, by the central nervous system dysfunction, and by multiple organ dysfunction. A 11-month-old male American Pit Bull Terrier was presented to clarify the cause of death to diagnostic laboratory. This dog showed clinical signs such as high body temperature ($42^{\circ}C$), severe tachypnea, hematochezia, epistaxis and hemoptysis after transportation at hot summer time. At necropsy, there were hemorrhages in skin, serosa of stomach and small intestine, and also dark red fluid in lumen of intestine. Histopathologic examination revealed extensive hemorrhages in stomach, muscle, skin, and tongue. In microbiology, pathologic bacteria such as Pasteurella, Boedetella, Salmonella, Clostridium, and circulating virus in Korea such as CDV, CIV, CAV, CHV, CCV, CPIV were negative except CPV. There were many gross and microscopic lesions suggesting hest stroke while pathologic agents and related lesions were not detected. Therefore we diagnosed this case as heatstroke.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2015.08a
• /
• pp.111.2-111.2
• /
• 2015

Typical electrodes (metal or indium tin oxide (ITO)), which were used in conventional organic light emitting devices (OLEDs) structure, have transparency and conductivity, but, it is not suitable as the electrode of the flexible OLEDs (f-OLEDs) due to its brittle property. Although Graphene is the most well-known alternative material for conventional electrode because of present electrode properties as well as flexibility, its carrier injection barrier is comparatively high to use as electrode. In this work, we performed plasma treatment on the graphene surface and alkali metal doping in the organic materials to study for its possibility as anode and cathode, respectively. By using Ultraviolet Photoemission Spectroscopy (UPS), we investigated the interfaces of modified graphene. The plasma treatment is generated by various gas types such as O2 and Ar, to increase the work function of the graphene film. Also, for co-deposition of organic film to do alkali metal doping, we used three different organic materials which are BMPYPB (1,3-Bis(3,5-di-pyrid-3-yl-phenyl)benzene), TMPYPB (1,3,5-Tri[(3-pyridyl)-phen-3-yl]benzene), and 3TPYMB (Tris(2,4,6-trimethyl-3-(pyridin-3-yl)phenyl)borane)). They are well known for ETL materials in OLEDs. From these results, we found that graphene work function can be tuned to overcome the weakness of graphene induced carrier injection barrier, when the interface was treated with plasma (alkali metal) through the value of hole (electron) injection barrier is reduced about 1 eV.

• Archives of design research
• /
• v.13 no.3
• /
• pp.253-260
• /
• 2000

Writing instruments or pens have many features not commonly found in other products in terms of their structure and characteristics of use. That is, different pens are usually composed of almost identical parts and/or structure. The fact they work always grabbed in hands considered, the ergonomic design of pens is essential. Reports indicate consumers evaluate pens in writing comfort above all other factors when they select pens. Among various factors related to writing comfort, it shouldspecifically be the ergonomic improvements that design can effectively contribute to. Studies on the pen-grabbing comfort or on approaches based on the understanding of human-work relationships generally lack when compared with fashion-conscious aesthetic approaches to pen design. This paper, therefore, aims to reestablish the ergonomic design criteria including the necessities of specifications required to provide indispensable data for the pen design processes. Consequently, it should produce basic set of information for systematic approach to pen design and development, which is commonly called'concurrent engineering'. Also a cost-effective solution for product diversification strategy could be attributed to a modular system database based on the result of this attempt.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.446-446
• /
• 2009

표면 패시베이션 기술로 이용되는 수소화된 실리콘 질화막은 제조원가의 절감을 위한 실리콘 기판재료의 두께 감소에 따른 특성상의 문제점을 해결하기 위해 중요한 영향을 미치는 요소이다. 실리콘 질화막은 강한 기계적 강도, 우수한 유전적 특성, 수문에 의한 부식과 유동적 이온에 대한 우수한 저항력 때문에, 반도체 소자 산업에서 널리 사용되고 있다. 수소화된 실리콘 질화막은 반사방지 특성과 함께 표면 패시베이션의 질을 향상시킬 수 있다. 굴절률 1.9 ~ 2.3 범위에서 쉽게 변화 가능한 수소화된 실리콘 질화막은 굴절률 1.4 ~ 1.5 사이의 열적 산화막 보다 효과적인 반사방지막이다. 수소화된 실리콘 질화막을 사용한 태양전지에서는 효율을 높이기 위해서 기판 표면에서의 케리어 재결합이 억제되어져야한다. 또한, 수소화된 실리콘 질화막은 최적화된 두께와 굴절률을 가져야한다. 본 연구에서는 고효율 태양전지에 적용하기 위해 반송자 수명이 향상된 수소화된 실리콘 질화막을 플라즈마 화학 기상 증착법을 이용하여 증착하였다. 박막은 $250^{\circ}C\;{\sim}\;450^{\circ}C$에서 증착되었으며 증착된 박막은 1.94 to 2.05 굴절률 값을 가지고 있다. 반송자 수명을 증가시키기 위해 $650^{\circ}C\;{\sim}\;950^{\circ}C$에서 어닐링 하였고 반송자 수명을 측정하여 패시베이션 특성을 분석하였다. 수소화된 실리콘 질화막은 $850^{\circ}C$의 어닐링 온도와 굴절률 2.0 조건에서 가장 좋은 반송자 수명을 나타냈다.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2009.06a
• /
• pp.384-384
• /
• 2009

에폭시 수지에 유기화된 층상실리케이트 나노입자를 1wt% 충진한 경우 나노콤포지트와 마이크로 입자를 50wt% 충진한 경우 마이크로 콤포지트를 제조하였다. 초음파 분산법을 이용하여 나노 및 마이크로입자를 120분 동안 분산시킨 에폭시- 나노/마이크로 콤포지트이다. 나노콤포지트와 마이크로콤포지트의 단시간 교류절연파괴특성을 조사하기 위해 와이블 분포 plot을 통하여 나타내었다. 와이블 plot은 기울기로서 형상파라미터를 나타낸 경우로서 이는 파괴강도의 균질성을 의미하게 된다. 63.2% 누적분포함수를 나타낸 경우 척도파라미터로서 나타내어진다. 마이크로 콤포지트의 경우 형상파라미터가 2.99, 나노콤포지트는 8.96를 나타내었다. 또한 마이크로 콤포지트 및 나노콤포지트 스케일 파라미터는 164.25kV/mm, 245kV/mm를 얻었다. 또한 B10수명의 경우 마이크로콤포지트와 나노콤포지트의 경우 77.57kV/mm, 139.3 6kV/mm로서 나노콤포지트의 경우 완전하게 박리가 일어난 경우이다. 마이크로 입자를 분산시켜 입자간거리와 나노입자를 분산시켜 박리가 일어난 경우 입자간거리는 대단히 큰 차이를 나타내고 있다. 나노입자가 교번전계 하에서 주입된 전하 및 케리어 이동을 억제하는 경우로 이와같은 결과를 얻을 수 있다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.5
• /
• pp.45-49
• /
• 2010

The automotive industry has shown a growing interest in tube hydroforming during the past years. The advantages of hydroforming (less thinning, a more efficient manufacturing process, etc.) can, for instance, be combined with the high strength of extra high strength steels, which are usually less formable, to produce structural automotive components which exhibit lower weight and improved service performance. Design and production of tubular components require knowledge about tube material and forming behavior during hydroforming and how the hydroforming operation itself should be controlled. These issues are studied analytically in the present paper. In this study, the whole process of rear sub-frame parts development by tube hydroforming using AA6061 material is presented. At the part design stage, it requires feasibility study and process design aided by CAE (Computer Aided Engineering) to confirm hydroformability in details. Effects of parameters such as internal pressure, axial feeding and geometry shape in automotive rear sub-frame by hydroforming process were carefully investigated. Overall possibility of hydroformable rear sub-frame parts could be examined by cross sectional analyses. Moreover, it is essential to ensure the formability of tube material on every forming step such as pre-bending and hydroforming. In addition, all the components of prototyping tool are designed and interference with press is examined from the point of geometry and thinning.

• Journal of Korean Society of Steel Construction
• /
• v.13 no.4
• /
• pp.407-417
• /
• 2001

To secure good visibility various steel flexible barriers were introduced and constructed in the area where a highway runs in parallel with a railroad. However, none of the flexible barriers was proven to satisfy the performance criteria for the impact condition of $14tonf-80km/h-15^{\circ}$ set forth by Korea design guide. Thus, in this study, the impact performance of the flexible barriers was investigated by using Barrier VII program, which was most widely used for the preliminary design of barriers. From the analytical results, it has been found that none of the barriers satisfied the stiffness requirement while the Type C barrier showed stiffer behavior than the others. Thus, the way to strengthen the installed Type C barrier was experimentally investigated. The method of partially filling concreter inside the pst was efficient to satisfy the performance criteria for the impact condition of $14tonf-80km/h-15^{\circ}$.

• Journal of Korean Society of Water and Wastewater
• /
• v.32 no.3
• /
• pp.235-242
• /
• 2018

Corrosion inhibitors including calcium hydroxide have been used to prevent corrosion in the pipes for tap water supply. The corrosion index (i.e., Langelier Index) differs by area and water quality. The corrosion indices of the areas studied differed by more than 2.0. The 'homogenized' calcium hydroxide was added to the treated water at the K water treatment plant, in order to increase the value of the corrosion index and the concentration of calcium. As the result, the concentration of calcium was increased while the turbidity and pH changed little. The corrosion rate of the tap water with the 'homogenized' calcium hydroxide could be slowed down pretty much. The results suggested that the technology of 'homogenization' of calcium hydroxide can applied to tap water and desalinated water to prevent corrosion in water pipes even in corrosive pipes.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.19 no.2
• /
• pp.95-102
• /
• 2013

Exfoliated graphite (EFG) with high aspect ratio was incorporated with high density polyethylene (HDPE) for use as high barrier packaging material such as water-sensitivity electric product and pharmaceutical packaging. Also HDPE/EFG nanocomposite films were prepared by adding the compatibilizer for effective dispersion and compatibility. Their chemical properties, crystal structure properties, thermal properties and water barrier properties of as-prepared HDPE/EFG nanocomposite films were investigated as a function of EFG contents. It showed that there is a weak interfacial interaction between HDPE and EFG, however, the water vapor permeations were decreased from 127 to 78 (70 ${\mu}m{\cdot}g/m^2$, $day{\cdot}atm$) by addition of EFG. Especially, the physical properties of HDPE/EFG nanocomposite films were effectively increased up to 0.5 wt%, however, there were no significant improvement of properties in nanocomposite films at the additional EFG loading. To maximize their performance of the nanocomposite films, further research is required to enhance the dispersion of EFG and compatibility of EFG in HDPE matrix.