• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.2
• /
• pp.689-694
• /
• 2018

Recently, fuel consumption efficiency has become the most important issue in the vehicle development process due to the problem of environmental pollution. The air flow patterns of the vehicle body line and rear part are the most important elements affecting the fuel consumption efficiency. Especially, the airflow pattern of the vehicle rear part is the most important design factor to be considered in rear spoiler design. In this paper, the control factors affecting the airflow of the rear spoiler are determined, the airflow sensitivity of these control factors are tested and, then, the optimized control factors to reduce the airflow drag force are proposed. The model of optimized control factors is tested and the values of the optimized control factors are changed by analyzing the S/N ratio and mean value. Finally, the new modified model incorporating the optimized control factors is tested in an air flow tunnel and its ability to decrease the air drag and reduce the cost is verified.

• Korean Journal of Optics and Photonics
• /
• v.15 no.1
• /
• pp.39-45
• /
• 2004

A computer simulation about removal of the 0-th order diffraction is achieved by using numerical reconstruction in digital holography and the Fourier transform method. A light intensity distribution hologram is generated through numerical calculation of the interference pattern. Additionally a phase hologram without the 0-th order diffraction is generated. The removal function for elimination of the 0-the order diffraction is introduced and the numerical reconstructions with several conditions for the removal of the 0-th order diffraction and the production of high quality numerically reconstructed images are tested and compared. The removal function is proven to be more effective at the suppression of the 0-th order diffraction compared with the DC suppression method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.11a
• /
• pp.392-392
• /
• 2008

나노크기의 반도체 물질은 표면적/부피 비와 그 크기에 의해 광학적, 전기적 특성이 크게 영향을 받는다. 나노크기의 반도체 재료 중 ZnO는 3.37eV의 넓은 에너지 밴드갭을 가지고 있으며, 60meV의 큰 엑시톤(exciton) 결합에너지의 특성을 가지고 있어 UV 영역의 소스로서 가장 활용도가 클것으로 예상된다. 1 차원 ZnO 나노구조는 청색과 자외선 발광소자 및 광전자 소자, 화학적 센서로 활용이 가능하다. whisker, nanowires, norods, nanonail, nanoring 등과 같은 ZnO 나노구조의 형태와 크기는 합성장비와 공정조건에 크게 영향을 받고 서로 다른 광 특성 결과를 나타낸다. ZnO 나노구조의 합성을 위해 다양한 금속 촉매를 이용한 기상-액상-고상(VLS)의 성장 메카니즘이 연구되었다. 그러나 이 방법은 촉매로 사용된 금속이 불순물로 작용하는 결점을 가지고 있다. 최근에는 기판위에 아무런 촉매도 사용하지 않은 ZnO 의 합성에 대해 많은 연구가 진행되고 있다. 그러나 촉매없이 합성된 나노구조의 형태와 성장방향은 초기단계에서 불규칙한 원자배열로 인해 합성상태의 제어 (방향, 형상 등)가 매우 어렵다. MOCVD 장비 금속 촉매를 이용하지 않고도 미량의 Zn 와 $O_2$ 량을 일정하게 조절함으로써 형상 및 방향성을 제어 할 수 있다는 장점을 가지고 있다. 또한 본 연구에 사용된 MOCVD 장비의 경우 추가적인 케리어 가스 유입을 통해 나노막대의 aspect ratio 조절이 가능하다. 본 연구는 MOCVD 장비를 이용해 촉매를 사용하지 않고 1 차원 ZnO 나노막대를 합성하였고, 추가적 케리어 가스 유량을 변화시킴으로써 형태 변화 및 발광특성에 관한 영향을 연구하였다.

• Journal of Veterinary Clinics
• /
• v.26 no.2
• /
• pp.185-188
• /
• 2009

A six-month-old Boston terrier presented with an extruded penis caudally, incompletely formed preputial sheath, bifid scrotum, retained testicle and deformity of the os penis. On physical examination, the urethral orifice was located on the surface of the perineum and a fibrous band was observed running from the grans to the urethral orifice on the perineum. The dog also had urethritis that was infected by ascending bacteria entering through the contaminated urethral orifice. Corrective surgery was undertaken to excise the external genitalia and retained testicle. The prepuce, penis and retained testicles were successfully excised. After the urethral orifice was cleaned periodically and antibiotics were administrated, recurrent urethritis disappeared. Using this therapeutic regime it is not necessary to reconstruct the anomaly located urethral orifice, if the location of urethral orifice is not the cause of recurrent urethritis and urinary incontinence.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.24 no.5
• /
• pp.160-168
• /
• 2010

This paper tried to find out NO generation and removal mechanisms in the space of the atmospheric pulsed barrier discharge using laser induced fluorescence method, which is a very effective approach to the measurement of spatio-temporal density of specific molecules. The propagation velocity of the primary streamer reaches about $2.7{\times}10^6$[m/s] and the secondary streamer is produced in the vicinity of positive electrode after the primary streamer finished. In this work, pulse Nd:Yag and Dye lasers are used for generating the specific wavelength of 226[nm], which is possible to excite NO molecules into $A^2{\Sigma}^+{\rightarrow}X^2{\prod}$(0,0) and fluorescence signals as the transition of $A^2{\Sigma}^+{\leftarrow}X^2$(0,2) is measured. For the effective removal of NO molecules in the plasma discharge process, the lower oxygen contents are needed and the influence of secondary streamer for the reduction mechanism of NO molecules is important

• Korean Journal of Optics and Photonics
• /
• v.17 no.2
• /
• pp.181-185
• /
• 2006

A novel 60GHz optical carrier generator with a polarization domain-inverted structure is suggested and is demonstrated. The two arms of the Mach-Zehnder optical waveguide are periodically poled for quasi-phase velocity matching between the optical wave at 1550nm and the RF wave at 30 GHz. The center frequency of band-pass modulation and the 3 dB bandwidth of the fabricated modulator were measured to be 30.3 GHz and 5.1 GHz, respectively. Sub-carriers with the frequency difference of 60GHz waeregenerated under appropriate DC biac voltage application while the carrier was suppressed to lead to the power ratio between the modulated sub-carrier and the suppressed fundamental carrier of 28 dB, which proves that double sideband- suppressed carrier(DSB-SC) operation can be realized by the suggested single device.

• Journal of the Korea Society of Computer and Information
• /
• v.26 no.9
• /
• pp.1-12
• /
• 2021

In this paper, we propose a tool called ARCAV (Atomatic Recovery of CUDA Atomicity violation) to automatically repair atomicity violations in GPU (Graphics Processing Unit) program. ARCAV monitors information of every barrier and memory to make actual memory writes occur at the end of the barrier region or to make the program execute barrier region again. Existing methods do not repair atomicity violations but only detect the atomicity violations in GPU programs because GPU programs generally do not support lock and sleep instructions which are necessary for repairing the atomicity violations. Proposed ARCAV is designed for GPU execution model. ARCAV detects and repairs four patterns of atomicity violations which represent real-world cases. Moreover, ARCAV is independent of memory hierarchy and thread configuration. Our experiments show that the performance of ARCAV is stable regardless of the number of threads or blocks. The overhead of ARCAV is evaluated using four real-world kernels, and its slowdown is 2.1x, in average, of native execution time.

• Journal of IKEEE
• /
• v.23 no.2
• /
• pp.431-437
• /
• 2019

This work was carried out ozone generation and TCE decomposition characteristics using dielectric ball materials filled barrier discharge reactor and catalyst's reactor for ozone decomposition. Ozone concentration generated from $Al_2O_3$ or $TiO_2$ filled barrier discharge reactor was so high compared with non-filled discharge reactor. This reactor is good discharge structure for generating the high ozone concentration. In addition, TCE decomposition rate and COx conversion rate increased using $MnO_2$ filled discharge reactor, because ozone was decomposed at the same discharge space on the surface of $MnO_2$ catalysts. To identify the $MnO_2$ catalytic effects, TCE decomposition rate reached to 100[%] by the decomposition of ozone at $MnO_2$ catalyst's reactor by the arrangement of $Al_2O_3$ filled discharge reactor and $MnO_2$ catalyst reactor. Finally, $MnO_2$ catalyst is good materials for the decomposition of ozone and this process will be useful for decomposing VOCs such as TCE.

• Journal of Internet of Things and Convergence
• /
• v.8 no.5
• /
• pp.41-46
• /
• 2022

This study analyzed the results and implications of the industry-university cooperation human resource nurturing process based on the I-O model for the Motion Graphics major and the Global Hotelier major in Baek seok University. In this study, based on the analysis of the human resources training performance through industry-university cooperation in the motion graphics and hotelier fields for 5 years, what kind of efforts were made for successful human resource training, and the level of performance was analyzed and improvement points were suggested. In this study, four strategies were set for successful industry-university-tailored human resource nurturing: student-industry matching through industry participation in education, industry-university integrated education, education quality advancement, and customized education infrastructure construction. As a result of the analysis, customized human resource training should first be developed through industry demand survey and a mirror-type practice room should be built to fit the corporate environment. Second, it was found that it is possible to be individual only if there is an active participation of industry experts throughout the curriculum such as subjects and non-subjects.

• KIPS Transactions on Computer and Communication Systems
• /
• v.12 no.2
• /
• pp.61-68
• /
• 2023

Demand for "pet plants" and "planteriers" is increasing due to the increase in COVID-19 and fine dust. In this paper, Smart pots for planterior should be small in size while providing the functions for cultivation without any problems. They should provide a user interface for long-range control for user's convenience. We implemented smart pots by incorporating IoT into pots. In response to the growing number of iPhone users, we developed an iOS app for user interface and UX/UI design. By communicating with the smartphone app and a home pot server over the Internet, users can check and control the state of the pot anytime, anywhere. The server and the pot module were separated to reduce the size of the pot itself. By locating a water bottle at the bottom of the pot, we expect that it is suitable for a "planterier" because it adopts a circulating structure in which drainage flows down to the water bottle as it is.