• Journal of Satellite, Information and Communications
• /
• v.8 no.2
• /
• pp.12-16
• /
• 2013

In this paper, we proceeded a study about the mobile software applications using smartphone technology. Firstly, we proposed a communication which a position data transmission technique using LED flashlight with built-in smartphone and we develop the application to perform a remote controller for beam-forming communication based on visible light associated with the position of Smartphone user. OOK modulation was applied for transmitting location data via LED backlight flash of smartphone and PD is used for detecting receiving light. In case of remote controller application which was controlled by WiFi IP-networking and it controls LED direction for beam-forming communication. These suggestion can be a good example for ubiquitous position recognition system using smart phone and software.

• Journal of Advanced Navigation Technology
• /
• v.17 no.6
• /
• pp.646-651
• /
• 2013

In this paper, a small inverted-F antenna with adjustable characteristics is proposed with use of lumped elements, capacitor and resistor. Capacitor is inserted between end of the antenna and ground for size reduction and tuning of resonant frequency. On the other hand, $0{\Omega}$ resistor is replaced as the short line connected to ground. The movement of short point due to use of $0{\Omega}$ resistor results in providing variation of input impedance. Therefore optimum characteristics can be obtained only by proper choice of capacitor and short point without redesign of it's geometry. In order to check the validity, the proposed antenna is designed and fabricated for 2.4 GHz frequency band, and then is applied to a product of Zigbee wireless remote controller. As a result, the size of applied antenna is $8.5{\times}4.5mm^2$ and it is observed that the measured bandwidth and antenna gain are 150 MHz and 2 dBi respectively without redesign of the antenna.

• Journal of Broadcast Engineering
• /
• v.23 no.6
• /
• pp.931-938
• /
• 2018

D-CATV VOD service provides various contents such as drama and movie with high quality regardless of time and place. As the usage time of the VOD service increases, the viewing time of real-time terrestrial broadcasting is shortened. As the demand for VOD service is high and the number of digital users is increasing, the VOD market is rapidly growing. Therefore this study investigates the age and gender analysis of digital cable TV users and analyzed the usage patterns and audience cases of users. VOD service has been shown to be used by many users for the first time through remote control and free coupons. Non-users of VOD service did not use it because of charge and did not feel the necessity, but some non-users did not recognize the free VOD service.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.5
• /
• pp.157-162
• /
• 2019

Recently, the awareness of S/W education, which was confined to the profession, is changing due to the changing industrial environment based on ICT technology World main countries invest competitively in S/W education and the target age group is getting lower Among them, the unplugged coding method using the robot platform is known as one of the most effective S/W training methods targeting the elementary age by the intuitive coding method and the robot platform feedback. However, the unplugged coding method using the robot platform has a disadvantage that it can not configure various interfaces for complicated coding due to limitations of H/W. In this paper, we have proposed an unplugged coding system which can input various commands for robot control by IR remote control as an interface and minute signals using robot sensor.

• Asia-pacific Journal of Multimedia Services Convergent with Art, Humanities, and Sociology
• /
• v.7 no.6
• /
• pp.827-837
• /
• 2017

Since the area of smart home has been attracting attention, researches have been conducted to control syntagmatically various electronic products with a single remote controller. Previous researches have developed a dedicated controller or an application that acts as a remote controller and controls electronic products by configuring control screen for each product. However, these approaches are not suitable for controlling various electronic products that should be controlled by configuring separate control screens for each product. In this paper, we propose a web-based remote control platform. We define universal user interfaces applicable to various devices by categorizing user interactions of electronic goods and implement them as APIs. By applying the APIs to IPTV and car navigation devices we show that it is possible to control them through only a web browser. We also propose a method to group multiple control requests in order to efficiently handle consecutive control requests and show the improved response time and data usage.

• 한국HCI학회:학술대회논문집
• /
• 2008.02a
• /
• pp.573-578
• /
• 2008

Recently, we should control various devices such as TV, audio, DVD player, video player, and set-top box simultaneously to manipulate home theater system. To execute the function the user want in this situation, user should know functions and positions of the buttons in several remote controllers. Normally, people feel difficult due to these realistic problems. Besides, the number of the devices that we can control shall increase, and people will confuse more if the ubiquitous home environment is realized. Therefore, user adaptive interface that provides the summarized functions is required. Moreover there can be a lot of mobile and stationary controller devices in ubiquitous computing environment, so user interface should be adaptive in selecting the functions that user wants and in adjusting the features of UI to fit in specific controller. To implement the user and controller adaptive interface, we modeled the ubiquitous home environment and used modeled context and device information. We have used Bayesian network to get the degree of necessity in each situation. Behavior selection network uses predicted user situation and the degree of necessity, and it selects necessary functions in current situation. Selected functions are used to construct adaptive interface for each controller using presentation template. For experiments, we have implemented ubiquitous home environment and generated controller usage log in this environment. We have confirmed the BN predicted user requirements effectively as evaluating the inferred results of controller necessity based on generated scenario. Finally, comparing the adaptive home UI with the fixed one to 14 subjects, we confirmed that the generated adaptive UI was more useful for general tasks than fixed UI.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.7
• /
• pp.63-71
• /
• 2018

A flower support was developed for real flower decoration automation production system using an ultrasonic wave sealer to automatically produce a system. Because a flower support for real flower decoration that was produced manually could not meet the needs of the consumers, this study developed an automated manufacturing system to increase productivity. A flower support for real flower decoration was constructed using a cap consisting of plastic and plate made from non-woven fabric. The guide was designed to transport the cap to the ultrasonic wave sealer and optimal guide was developed from the test according to the material and shape. To produce the entire system, the guides and accessories were weighed and appropriate motors and pulleys were calculated. Control of the automation production system was based on a PCB board, which increased the reliability and security, and a remote controller with manual and automatic modes was prepared. After development, tests of the transfer precision and repetition accuracy revealed an X-axis of 2.7mm, a Y-axis of 1 mm, and a repetition of 0 mm. The productivity was also checked. The automated machine worked 8 hours/day to make 35 supports and 70 Therefore, the automatic system produces 200% more output than manual work

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.9 no.5
• /
• pp.25-37
• /
• 2010

This study is aimed at enhancing mobility rights for the transportation underprivileged that has been made light of relatively compared to normal people. In order to do this, we've suggested having ITS (Intelligent Traffic System) built and improving satisfaction through the test operation of its main system. The existing sound signal device for the visually handicapped has one problem with managing it. Because, the people in charge of it had to visit each problematic site directly to maintain and fix some problems every time it was out of order. Moreover, it couldn't provide sustainable services about voice guidance and the visually handicapped had to control it by either confirming the location of buttons that were installed on the pillar of traffic light and then pressing one of them or using a remote controller on their own. In order to improve such inconveniences, we have created a new typed sound signal device for the visually handicapped by applying the cutting-edge wireless technology based on ergonomics considering actual road situations. Such technology enables it report the status of signal device and light to them by using its voice guidance system automatically every time they have access to it. Additionally, we've already introduced it to a couple of test areas and then known the fact that they recognized traffic situation more conveniently and safely compared to the existing sound signal device. That is above average in terms of satisfaction. In addition to that, we've provided LTS (Location Tracking System - Location-based service intended for elementary students) by utilizing the existing wireless infrastructure and founded the fact that about 87% of their parents were satisfied with the service based on LTS.

• Journal of the HCI Society of Korea
• /
• v.11 no.2
• /
• pp.15-22
• /
• 2016

The ways to interact with digital appliances are becoming more diverse. Users can control appliances using a remote control and a touch-screen, and appliances can send users feedback through various ways such as sound, voice, and visual signals. However, there is little research on how to define which output method to use for providing feedback according to the user' input method. In this study, we designed an experimental study that seeks to identify how to appropriately match the output method - voice and sound - based on the user input - voice and button. We made four types of interaction with two kinds input methods and two kinds of output methods. For the four interaction types, we compared the usability, perceived satisfaction, preference and suitability. Results reveals that the output method affects the ease of use and perceived satisfaction of the input method. The voice input method with sound feedback was evaluated more satisfying than with the voice feedback. However, the keying input method with voice feedback was evaluated more satisfying than with sound feedback. The keying input method was more dependent on the output method than the voice input method. We also found that the feedback method of appliances determines the perceived appropriateness of the interaction.

• Journal of Korean Society of Transportation
• /
• v.26 no.6
• /
• pp.39-47
• /
• 2008

With dramatic development of IT technology and start of DMB service, installing the DMB equipment in a vehicle for watching TV programs and literal or pictorial traffic information are increasing. Watching the DMB during driving the vehicle could cause visual and cognitive distraction to drivers as much as eating food, operating radio and using mobile phone. However, there is not much empirical research for this topic and no research examined the effect of watching the DMB on driving behaviors in Korea. So, the present study examined the effect of watching the DMB on the driving behaviors with car simulator experiment. Within subject design was used in the study. That is, all subjects drove the vehicle both in the watching DMB condition and the non-watching DMB condition. The results indicated that subjects in the watching DMB condition took longer time to arrive at the destination and operated accelerator and brake pedal rapidly than subjects in the non-watching DMB condition. That is, their overall driving stability was lower than non-watching subjects'. Additionally, we examined the difference among the DMB control conditions (i.e., keypad condition, touch-pad condition and remote controller condition) in the driving behaviors. Finally, we discussed the limitations and the implications of the present study.