• 한국산학기술학회논문지
• /
• 제16권10호
• /
• pp.6977-6984
• /
• 2015

품질 향상을 위해 연속적인 소성 변형을 이용한 롤 포밍 공정에 피어싱, 벤딩, 트리밍 등 별도의 가공공정을 통합한 볼 슬라이드 레일의 멀티 롤 포밍 공정의 필요성이 대두되고 있다. 하지만 프레스기의 진동 및 소음은 이 공정에서 생산되는 슬라이드 레일의 품질 저하를 유발한다. 본 연구에서는 롤 포밍 유한요소 프로그램으로 최적 변형률을 고려하여 롤을 설계하였다. 그리고 멀티 공정의 정적 안정성을 예측하기 위해 구조해석 프로그램으로 프레스기에 대한 응력 및 변형량을 계산하였다. 또한 공진영역에서의 장치들의 운전을 회피하기 위해 Modal 해석을 통해 1, 2차 모드에서의 고유진동수를 계산하였다. 그 결과 공정의 동적 안정성 개선을 확인하기 위해 마이크로폰과 가속도계를 이용하여 기존 및 연구 공정들의 소음, 진동의 크기를 비교하였다. 그리고 기존 및 연구 공정으로 생산되어진 레일의 폭 치수와 표면거칠기를 측정하였다. 따라서 해석 및 실험적 연구를 통해 멀티 롤 포밍 공정이 안정하다는 것을 알 수 있었다.

• 대한기계학회논문집A
• /
• 제27권11호
• /
• pp.1881-1888
• /
• 2003

This study show a numerical method to predict roll wear in the roll forming process. Archard's wear model was reformulated in an elemental form to predict volume of roll wear and then wear depth on the roll was calculated using the results of finite element analysis. Abrasive wear occurs at contact area in the roll forming process and the results of simulation are compared with experimental data in production line. The wear simulation approach with 3-D FEM program for roll forming process, SHAPE-RF is in good agreement with it in tendency.

• 한국정밀공학회지
• /
• 제29권8호
• /
• pp.840-844
• /
• 2012

Roll forming process is a sheet metal forming process where the forming occurs with rolls in several steps, often from an undeformed sheet to a product ready to use. And each pair of forming rolls installed in a forming machine operates a particular role in making up the required final cross-section. This process used to many industry manufactures and recently apply to automotive industry. This study, FEM simulation applied bumper reinforcement using SHAPE-RF software and analyzed about total effective strain, longitudinal strain, thickness according to the roll-pass.

• 대한기계학회논문집A
• /
• 제27권9호
• /
• pp.1451-1456
• /
• 2003

In code roll forming processes, the sheet metal strip is gradually and successively bent into a desired profile. Occurrence of buckling is one of the major defects. Buckling may occur due to longitudinal stress and it is difficult to predict buckling behavior. In this study an analytical method for buckling behavior during roll forming is proposed. All numerical simulations are performed by finite element analysis. The behavior of buckling can be predicted with the simulation modeling of the finite element method.

• 한국정밀공학회지
• /
• 제33권6호
• /
• pp.477-483
• /
• 2016

The spring-back and bow phenomenon in the roll forming process are important factors regarding the accuracy of evaluation of production goods. The purpose of this study was to determine the influence of spring-back and bow phenomenon according to the main variables (forming velocity and roll gap). The material of the forming sheet was high tension steel (SPFH 590), which has been used commonly in recent years. In order to accurately measure the spring-back and bow phenomenon, the forming sheet was formed into a V-shape. The study was applied to OFAT (One Factor at a Time) experimentation, with respect to the experimental variables (the forming speed and the roll gap). In the experimental results, the forming speed had a small influence on the spring-back and bow phenomenon. However, the roll gap had a greater influence on the springback and the bow phenomenon, as opposed to the forming speed.

• 대한기계학회논문집A
• /
• 제25권8호
• /
• pp.1213-1219
• /
• 2001

In this paper, modeling of the multi-pass roll forming process with the finite element method and defect prediction in roll forming process are presented. In the roll forming process, there occurs the defect of scratch. It appears on tubes because of the friction between the strip and the roll, the unexpected sliding velocity and the contact pressure when fabricating the tubes. The surface of the product will be not uniform due to the defect. The scratch can be predicted with the simulation modeling of the finite element method, and can be avoided by modifying the design.

• 한국공작기계학회논문집
• /
• 제17권3호
• /
• pp.78-85
• /
• 2008

Roll forming process is one of the most widely used processes in the world for forming metals. It can manufacture goods of the uniform cross section throughout the continuous processing. However, process analysis is very difficult because of the inherent complexity. Therefore, time is consuming and much money are needed for manufacturing goods. In order to overcome this difficulty, a new computational method based on the rigid-plastic finite element method is developed for the analysis of roll forming process. In this paper, the design of roll forming process and the simulation are performed to manufacture the upper member at under rail composed of three members. The cold rolled carbon steel sheet(SCP-1) is used in this simulation, and a flow stress equation is set up by conducting the tensile test. The upper member is designed using two types of design for a excellent design. Each types are simulated and compared with the strain distribution using SHAPE-RF software. In addition, the numerical magnitude of bow and camber which are the buckling phenomenon is estimated.

• 동력기계공학회지
• /
• 제17권3호
• /
• pp.65-71
• /
• 2013

The under rail slide is the latest device to make accurate rectilinear reciprocating motion. In these day, 3-point type is used mostly for the products requiring high strength and performance such as refrigerator door guide or furniture drawer guide. However, It is all imported from foreign countries due to lack of the roll forming technique to make 3-point type under rail slide in domestic. Therefore, design and manufacturing technology for the 3-point type under rail slide are need to development through systematic study. In this paper, to make center member of 3-point ball-type under rail slide for the refrigerator doors, the roll forming modeling and simulation are performed using Shape-RF software. Tensile test is performed about SCP-1 1/2H for determine the mechanical properties of materials. Interference between the roll and the final shape are predicted from the results of the simulation ; this result show that the desirable performance and usefulness of the designed roll forming process.

• 한국정밀공학회지
• /
• 제30권8호
• /
• pp.797-801
• /
• 2013

Today's automotive industry is evolving toward low-emissions or zero-emissions high-efficiency vehicles. Highly efficient power sources are required, as well as high strength steels for various parts to increase safety. In this study, we investigated the roll-forming process for the development of high strength, lightweight steel bumper beams. The roll-forming process was analyzed using the software package Shape-RF in combination with a rigid-plastic finite element method model. An optimal roll-forming process based on roll-pass was obtained using finite element method simulations.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2007년도 추계학술대회 논문집
• /
• pp.201-206
• /
• 2007

In this paper, we apply a three-dimensional rigid-plastic finite element method to simulate an unsteady-state roll forming process. A typical roll forming process is investigated from the standpoint of computer simulation and its realistic analysis model is proposed. The material is considered as bulk material and discretized into hexahedral finite elements. The presented approach is applied to simulating the roll forming process of straight stringer used for aircraft structure.