• Journal of the Korean GEO-environmental Society
• /
• v.6 no.3
• /
• pp.35-45
• /
• 2005

The rockfall protection fence is one of the most common rockfall protection methods in Korea. The typical rockfall protection fence consists mainly of three parts ; H-beam supports, wire meshes, and wire ropes. The design of the rockfall protection fence is made such that the total energy absorbing capacity of the fence. Therefore, resulting from the combined energy absorbing capacity of the three parts is larger than the falling energy of rocks. In present study, a new rockfall protection fence, constructed using expanded metals instead of the existing wire rope and wire mesh for the typical type of rockfall protection fence, was evaluated on its performance by conducting both laboratory and field tests. Also, for a comparison, the same tests were performed on the typical rockfall protection fence. The test results revealed that the expanded material is an economic alternative to the existing protection materials and the expanded metal rockfall protection fence exhibits the higher energy absorbing capacity compared to that of the typical rockfall protection fence.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.7
• /
• pp.1623-1629
• /
• 2015

By increasing due to large-scale residential and commercial apartments or factories or were, and increases the length of the cable is connected from the electrical room, the thickness of the cable, the trend is also being gradually thicker to increase the power consumption. In this paper, the programs install the cable inserted in the rope a double bonded brake pipe to be laid underground in these cables, and to reliably collect various kinds of data such as a tension at the time of laying the cable, the distance and speed design, and the sample data was acquired through hardware making them. Through this, it was confirmed that, worker was significantly reduced and work time was shortened to the traditional mechanical laying equipment. And to obtain a performance of improving the reliability of operation, because the use of the working data to the management and evaluation.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.14 no.9
• /
• pp.4402-4411
• /
• 2013

The aim of this study was to identify the effects of chiropractic treatment using Sacro Occipital Technique (SOT) on low back pain (LBP) and physical functions in patients with chronic LBP. Forty-five women with chronic LBP were randomly assigned to the Diversified Technique (DT), SOT or DT+SOT group and received chiropractic treatment two times a week for 8 weeks. LBP was measured using Visual Analogue Scale (VAS), Oswestry Disability Index (ODI), and Roland-Morris Disability Questionnaire (RMDQ) at baseline and after 4 and 8 weeks of treatment. Physical functions were evaluated using lumbar strength, flexibility, and body symmetries. After 4 and 8 weeks, VAS, ODI, and RMDQ were significantly decreased in all 3 groups (all p<.001). Lumbar strength, flexibility, and shoulder and pelvic balances were significantly improved in all 3 groups (all p<.05). In conclusion, our results suggest that SOT and DT both may be effective for reducing LBP and improving physical functions.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.14 no.1
• /
• pp.133-140
• /
• 2010

Five strengthened columns and an unstrengthened column were tested under constant axial load and cyclic lateral loads to examine the seismic performance of the unbounded strengthening procedure using wire ropes and T-plates. Main variables considered were the presence of mortar cover for strengthening steel element and anchorage method of T-plate. Test results clearly showed that T-plates having a proper anchorage contribute to transfer of applied moment as well as enhancement of ductility of reinforced concrete columns. However, T-plate not anchored fully into a column base can seldom transfer the externally applied moment, though it highly improves the ductility of column. The presence of mortar cover for strengthening steel elements is significantly effective in enhancing the initial stiffness and flexural capacity of the strengthened columns, but has an adversely effect on enhancing the ductility. The ultimate moment strength predicted from the extended section laminae method in better agreement with test results compared with predictions obtained using stress black specified in ACI 318-05.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.6
• /
• pp.258-263
• /
• 2020

Silicon carbide (SiC) fibers mainly fabricated from polycarbosilane, a ceramic precursor, are applied as reinforcing materials for ceramic matrix composites (CMCs) because of their high temperature oxidation resistance, tensile strength, and light weight. In this study, continuous SiC fibers used to fabricate rope-type flexible heating elements capable of generating high-temperature heat (> 650℃). For high-efficiency heating elements, the resistance of SiC fiber rope was measured by 2-point probe method according to the cross-sectional area and length. In addition, the fabrication conditions of rope-type SiC fiber heating elements were optimized by controlling the oxygen impurities and the size of crystal grains present in the amorphous SiC fiber. As a result, the SiC fiber heating element having a resistance range of about 100~200 Ω exhibited an excellent power consumption efficiency of 1.5 times compared to that of the carbon fiber heating element.

• Korean Journal of Organic Agriculture
• /
• v.17 no.4
• /
• pp.539-555
• /
• 2009

The potential of encapsulated inuloprebiotics from domestic Jerusalem artichokes (Helianthustuberosus) as natural antibacterial growth promotor for an antibiotic replacement in broiler chickens was presently assessed through assays of growth performance, serum immunoglobulin production and influence on caecal microflora. Two hundred-forty, 1-day-old, male broilers (Ross 308) were randomly allotted to four treatments (T1-T4), with three replicate pens per treatment and 20 chicks per pen. Broiler chicks were fed a basal diet (T1: control) or basal diet plus antibiotics (T2: Chlorotetracycline, 0.10%), 300 ppm of the inuloprebiotics (T3), or 450 ppm of the inuloprebiotics (T4) for 35 days. Body weight, dressing percentage or weight of breast and thigh muscles relative to carcass weight of T3 and T4 broiler chickens was significantly (P<0.05) higher than T1 and T2 broiler chickens. The weight of abdominal fat from T3 and T4 broiler chickens were significantly (P<0.05) lower than that of T1 and T2 chickens. Serum immunoglobulins in the T3 and T4 groups were significantly (P<0.05) elevated compared to the T1 and T2 groups. The weight of immune organs, thymus and Bursa of Fabricius relative to live body weight in the T3 and T4 groups were significantly (P<0.05) higher than the T1 and T2 groups. Bifidobacteria and Lactobacillus, which are beneficial bacteria, were present in greater numbers in the caecum of T3 and T4 birds than T1 and T2 groups, whereas potentially harmful Escherichiacoli and Salmonella were present in lower numbers, with differences being significant (P<0.05). These results suggest that a diet supplemented with 300 ppm of inuloprebiotics has potential as an antibiotic replacement for organic livestock feed supplement intended to improve production of broiler chicken.

• Journal of Life Science
• /
• v.22 no.7
• /
• pp.880-888
• /
• 2012

This study was carried out to investigate the effects of inuloprebiotics (INPs), an alternative antibacterial growth promotor, from Jerusalem artichoke extract (Helianthus tuberosus L.) on egg production and quality in Hyline brown laying hens. The hens were divided randomly into four treatment groups and housed in individual cages for 10 weeks: a control group (0 ppm INP) (T1), 450 ppm (T2), 600 ppm (T3), and 750 ppm (T4). Egg production, egg weight, Haugh unit, eggshell thickness, and breaking strength were significantly higher in all of the INP-treated groups compared with the control (p<0.05). Egg cholesterol was highest in the T1 group and decreased with INP addition from 15.04 to 17.98% (p<0.05). Compared with the T1 group, triglycerides in the blood and in total cholesterol decreased significantly in groups T2, T3, and T4 by 21.71-24.07% and 27.17-30.36%, respectively (p<0.05). The growth of cecum Bifidobacterium and Lactobacillus was stimulated in groups T2, T3, and T4 compared with T1, whereas the growth of Escherichia and Salmonella was clearly inhibited (p<0.05). The results suggest that the addition of 450 ppm INP to the diet of laying hens can improve egg production and egg quality.

• Journal of the Korea Society of Computer and Information
• /
• v.18 no.7
• /
• pp.23-35
• /
• 2013

This paper proposes an effective technique that is used to automatically extract feature vectors from vibration signals for fault classification systems. Conventional mel-frequency cepstral coefficients (MFCCs) are sensitive to noise of vibration signals, degrading classification accuracy. To solve this problem, this paper proposes spectral envelope cepstral coefficients (SECC) analysis, where a 4-step filter bank based on spectral envelopes of vibration signals is used: (1) a linear predictive coding (LPC) algorithm is used to specify spectral envelopes of all faulty vibration signals, (2) all envelopes are averaged to get general spectral shape, (3) a gradient descent method is used to find extremes of the average envelope and its frequencies, (4) a non-overlapped filter is used to have centers calculated from distances between valley frequencies of the envelope. This 4-step filter bank is then used in cepstral coefficients computation to extract feature vectors. Finally, a multi-layer support vector machine (MLSVM) with various sigma values uses these special parameters to identify faulty types of induction motors. Experimental results indicate that the proposed extraction method outperforms other feature extraction algorithms, yielding more than about 99.65% of classification accuracy.

• Journal of the Korea Concrete Institute
• /
• v.27 no.3
• /
• pp.207-214
• /
• 2015

This study examined the feasibility of wire ropes as lateral reinforcement at the boundary element of heavyweight concrete shear walls. The spacing of the wire ropes varied from 60 mm to 120 mm at an interval of 30 mm, which produces the volumetric index of the lateral reinforcement of 0.126~0.234. The wire ropes were applied as a external hoop and/or internal cross-tie. Five shear wall specimens were tested to failure under constant axial load and cyclic lateral loads. Test results showed that with the increase of the volumetric index of the lateral reinforcement, the ductility of shear walls tended to increase, whereas the variation of flexural capacity of walls was minimal. The flexural capacity of shear walls tested was slightly higher than predictions determined from ACI 318-11 procedure. The displacement ductility ratio of shear walls with wire ropes was higher than that of shear wall with the conventional mild bar at the same the volumetric index of the lateral reinforcement. In particular, the shear walls with wire rope index of 0.233 achieved the curvature ductility ratio of more than 16 required for high-ductility design.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.25 no.7
• /
• pp.927-935
• /
• 2019

Screw-failure accidents in small ships frequently occur in coastal waters. In particular, vessels' propulsion systems are frequently coiled due to objects such as fish-nets and ropes that float on the sea. The failure of the ship's propulsion system can cause primary accidents such as ship operation delays and drifting due to loss of power; furthermore, the possibility of secondary accidents such as those involving operators in the underwater removal of rope stuck in a propeller. Ships that do not have the proper tools to solve these problems must be either lifted onto land to be repaired or divers must dive directly under the ship to solve the problem. Accordingly, some small vessels have been equipped with rope-cutter devices on the propeller shaft to prevent ship propeller system accidents in recent years; however, they are not being applied efficiently due to the cost and time of installation. To solve these problems, this study develops an underwater rope-cutter device and controller for the removal of propeller and shaft foreign material in small vessels. This device has simple structures that use the principle of a saw. Meteor gears and crank pins were used for the straight-line rotation of saw blades of the underwater rope-cutters to allow for long strokes. Furthermore, the underwater rope-cutting machines can be operated by being connected to the ship battery. The user, a non-professional, can ensure convenience and stability by applying reverse current prevention and a speed control circuit so that it can be used more conveniently and safely.