• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.05a
• /
• pp.185-186
• /
• 2018

에어보트(Air boat)는, 판옥선처럼 선체 밑바닥이 편평한 형태로 되어있어 물위는 물론 일반 선박이 갈 수 없는 얕은 수면, 개펄, 빙상, 늪지수풀 위를 달릴 수 있는 모터보트의 한 종류이다. 선체상부 뒤쪽에 장착된 로터의 회전에 의한 풍력으로 추진되며, 로터 바로 뒤에 방향키가 있다. 선체 재질로는 스틸, FRP가 주로 사용되고 있으며 최근 알루미늄, 탄소섬유의 적용이 늘어나고 있다. 수상크루징, 낚시, 스쿠버 등에 활용되며, 선저의 독특한 형상으로 인해 군사용, 인명구조용, 수산물수송용 등으로도 사용된다. 이 연구에서는 12인승 비미니탑 에어보트를 설계, 제작하고 해상 시운전을 실시하였다. 또한 소음저감을 위해 머플러를 설계 제작하고, 35노트에서 75~78dB 수준으로 성능을 검증하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2006.05a
• /
• pp.331-336
• /
• 2006

This paper studies the effects of the nozzle-rotor axial clearance of a supersonic turbine on turbine performance. The nozzle-rotor axial clearance of the supersonic turbine developed to drive a turbopump for 30 ton class liquid rocket engines was varied and a numerical analysis of the turbines having the different nozzle-rotor axial clearances was conducted. It has been found that turbine performance degrades with an increasing axial clearance due to the increased stagnation pressure loss in the axial clearance region.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.160-163
• /
• 2010

We performed three-dimensional CFD analysis to investigate the effect of the nozzle-rotor axial gap of a partial admission supersonic turbine on the stage performance and the flow field. The computations are conducted for five axial gaps using flow analysis program, $FLUENT^{TM}$. The results show that the axial gap between nozzle and rotor give the effect on the mass flow rates of tip leakage and the flow angle at the rotor outlet.

• 한국전산유체공학회:학술대회논문집
• /
• 2005.04a
• /
• pp.30-34
• /
• 2005

고속 선박을 추진하는 한 방법으로 널리 사용되는 물분사 추진은 물을 내부 덕트로 빨아들여 임펠러로 물을 가속시켜 노즐을 통해 분사시킴으로써 입출구의 운동량차이에 의해 추력을 얻는 추진장치이다. 선박의 목적에 따라 사용되는 다양한 형태의 물분사 추진기의 개발을 위하여 모형실험을 통하여 그 성능을 검증하는 부분에서 로터의 피치각 변화에 따른 추진기의 성능 실험을 하는 것은 많은 비용과 시간이 따른다. 따라서 이러한 문제를 해결하기 위하여 본 연구에서는 추진기 내부의 유동장을 4가지 피치각에 따라 추진력을 3차원 비압축성 Navier-Stokes 방정식을 이용하여 해석하였다. 로터의 회전을 고려하여 슬라이딩 다중 격자기법을 적용하였고 추력계수, 토크계수, 그리고 모멘텀을 해석 결과와 비교 분석을 통하여 추진기의 성능과 효율을 추정하였다.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.15 no.4
• /
• pp.41-47
• /
• 2011

Turbopump, which is a part of 75 ton open cycle liquid rocket engine has a super sonic impulse turbine. This paper investigated the leading edge thickness effect on the turbine performance experimently. Two rotors were tested with the different leading edge thickness. The ratios (rotor thickness to Pitch) are 1.9 and 1.4 times to 30 ton turbine rotor. As a result, a rotor with 1.4 times ratio had a 1.5% higher efficiency gain than a rotor with 1.9 times ratio. The pressure ratio with the maximum efficiency on the same rotational speed was increased to the full expansion ratio of nozzle.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2010.11a
• /
• pp.149-152
• /
• 2010

It was investigated that effect of the supersonic impulse turbine rotor leading edge thickness which was the part of 75 ton open cycle liquid rocket engine turbopump. The test for turbine was performed that the rotor thickness to pitch ratio was 1.9 and 1.4 to 30 ton turbine. As a result of test, the rotor with lower thickness(1.4) had 1.5% efficiency gain to the higher thickness(1.9) and the pressure ratio with maximum efficiency was increased to the nozzle full expansion point.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2008.05a
• /
• pp.5-8
• /
• 2008

In this paper, the effect of turbine shape on the flow characteristics and performance of dental air turbine handpiece were studied using CFD. Computations have been performed for many different cases of the angle between the center-line of nozzle and turbine rotor by using frozen rotor method that one of steady-state method. The characteristics of turbine rotor for three different types (flat, concave, gull) were analyzed. Additionally, the turbine rotor of gull type that has better performance than others was computed for other reflected angles.

• 전기의세계
• /
• v.43 no.7
• /
• pp.7-22
• /
• 1994

잠수함추진방식은 크게 원자력 추진과 재래식 추진으로 나눌수 있다. 최근에는 재래식 추진방식과 하이브리드 개념으로 운용될 수 있는 AIP(air independent propulsion)방식도 활발히 연구되고 있다. AIP 추진으로는 폐회로 디젤기관추진(closed cycle diesel engine propulsion), 연료 전지추진(fuel cell propulsion) 스터링기관추진(stirling engine propulsion) 및 폐회로터빈추진(closed cycle turbine propulsion)등이 있다. 이러한 잠수함 추진체계에 대해 앞으로 크게 세부분으로 나누어 그 현황과 발전추세를 살펴보고자 한다.

• Aerospace Engineering and Technology
• /
• v.3 no.2
• /
• pp.50-55
• /
• 2004

Performance predictions of the propulsion system were conducted for a 900㎏ class Canard Rotor/Wing vehicle. The main components of the propulsion system are turbojet engine, exhaust ducts and nozzles. The internal flow of the duct was considered as one-dimensional, compressible and viscous flow. Adequate governing equations including centrifugal force effect were applied to the analysis of the duct flows. Results such as available power, available thrust, engine throttle, mass flow rates, rotor RPM and cruise nozzle area were presented for rotary-wing mode and transition mode.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.18 no.1
• /
• pp.65-72
• /
• 2014

Turbine rotor-pyrostarter coupled test was performed for the verification of thermo-structural suitability of a turbopump turbine. Newly developed solid propellant and design concept were used in pyrostarter development. In case of turbine rotor, rotor configuration modification and post EDM machining process are adopted in rotor manufacturing respectively for the thermal stress relief and the surface integrity improvement on the blade surfaces. In the test, combustion gas of pyrostarter was directly ejected from the nozzles and impinged on the stationary turbine rotor specimen through the identically shaped flow passage of turbopump. Three kind of thermal load - design to extreme condition - test were performed and no damages were found on the turbine rotor specimens.