• Journal of the Korean Magnetics Society
• /
• v.15 no.3
• /
• pp.191-197
• /
• 2005

In the fabrication process of Fe-based amorphous alloy powder cores by pulverization of the melt-spun ribbons and cold compaction, the effects of powder preparation method on the magnetic & electric properties, powder shapes and microstructure of cores have been investigated. The powder cores made by using rotor mill showed low effective permeability as compared to the cores prepared by ball milling. However the frequency dependence and quality factor properties were superior in the case of rotor-milling. Further the powders prepared by rotor mill had homogeneous and round shapes through strong shearing in the sieve ring, while the ball milled powders were inhomogeneous and relatively small. The lower permeability of the powder cores fabricated with rotor mill was considered to be due to the high internal stress occurred by very intensive shearing. Moreover the powder cores produced by rotor-milling showed lower core loss and good frequency dependence of effective permeability possibly due to the higher electrical insulation between magnetic particles. The dc bias property of the powder cores made by rotor-milling was better than the one by ball-milling.

• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2003.02a
• /
• pp.99-105
• /
• 2003

지방을 함유하고 있는 붉은자루 동충하초는 일반적으로 분쇄에 널리 사용되고 있는 핀밀이나 해머밀로 분쇄하기에는 어려움이 있다 핀밀이나 해머밀은 분쇄 로터날과 분쇄망사이의 갭사이에서 로터의 회전에 의하여 발생하는 원심력을 이용 충격과 마찰로 분쇄물을 분쇄망의 홀크기에 의존하여 분쇄를 하게된다. 이때 지방이 많은 분쇄물의 경우 로터와 망의 마찰로 인한 열방생으로 인하여 지방이 녹아 분쇄망의 홀을 매우는 눈막힘 현상이 발생하게 되어 분쇄를 더이상 할 수 없게 된다. (중략)

• Proceedings of the Korean Operations and Management Science Society Conference
• /
• 2000.04a
• /
• pp.717-720
• /
• 2000

베어링을 이용한 회전축은 모든 회전축의 근간을 이루고 있다. 이러한 회전축은 발전기 터어빈, 고정밀 공작기계 등에 많이 응용되고 있다. 그런데 이러한 대규모의 회전축에 이상이 생긴 경우, 이상을 방치하고 계속 사용하게 되면 기계전체의 파손을 가져올 수 있다. 이러한 기계전체의 파손이 일어나지 않도록 미리 이상을 진단할 수 있는 시스템을 구축하면 많은 비용을 절감할 수 있다. 지금까지 여러 종류 로터시스템 여러 종류의 이상진단을 시도하여 왔으며 앞으로도 많은 종류의 이상진단이 이루어지리라 생각한다. 다양한 형태의 이상진단은 시스템에서 추출되는 데이터를 통계적으로 처리하는 기법과 추출하는 센서의 특징을 파악하여 이상진단 알고리즘을 수립하는 과정을 망라하게 된다. 특히 이상진단 알고리즘에는 측정된 데이터의 불확실성을 감안한 이론이 적용되어야 한다. 본 논문에서는 로터시스템을 이용한 베어링 진단 유무에 대한 이상진단을 통계적 패턴인식 이용하여 정상과 비정상 상태를 구분하여 여러 종류의 이상을 구분하는 작업수행을 연구하고자한다.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.47 no.7
• /
• pp.489-498
• /
• 2019

The airloads and structural loads of Light Civil Helicopter (LCH) rotor are investigated using a loose CFD/CSD coupling. The structural dynamics model for LCH 5-bladed rotor cwith elastomeric bearing and inter-bladed damper is constructed using CAMRAD-II. Either isolated rotor or rotor-fuselage model is used to identify the effect of the fuselage on the aeromechanics behavior at a cruise speed of 0.28. The fuselage effect is shown to be marginal on the aeromechanics predictions of LCH rotor, though the effect can be non-negligible for the tail structure due to the prevailing root vortices strengthened by the fuselage upwash. A lifting-line based comprehensive analysis is also conducted to verify the CFD/CSD coupled analysis. The comparison study shows that the comprehensive analysis predictions are generally in good agreements with CFD/CSD coupled results. However, the predicted comprehensive analysis results underestimate peak-to-peak values of blade section airloads and elastic motions due to the limitation of unsteady aerodynamic predictions. Particularly, significant discrepancies appear in the structural loads with apparent phase differences.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.16 no.4
• /
• pp.2364-2369
• /
• 2015

In this paper, the optimum RPM was suggested comparing rotor filling rate of RPM through the analysis of rotor's filling rate as studying and developing centrifugal-casting machine's method for high precision rotor in order to increase the related types of business's productivity. The result was similar to other result in industrial site, showing 99.47% of filling rate when rotational speeds are 600 rpm, so it is considered that if this result is conducted with additional research, it will be possible to plan a better process design. Besides, the optimum temperature of compact ladle was examined to produce high quality casting product through the analysis of compact ladle's conductivity. In the case of the heating device's absence using nicrome wire, Al solution solidifies falling drastically into $427^{\circ}C$. However, it is feasible to work over $427^{\circ}C$ which is the melting temperature of aluminium solution when the heating device of nicrome wire is included. It reveals that there is little temperature change.