• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• v.9 no.2
• /
• pp.1000-1002
• /
• 2005

In the Bluetooth piconet in which up to 7 slave devices can be connected simultaneously at one network instance, the wireless data expected to be sent over to the RF interface should be sliced by the unit of 1 micrometer, which is a requirement in the specification of the Bluetooth version 1.1. In this contribution, we have designed a digital low-pass filter which is able to slice the unstable analog signal fed from the RF interface to the Baseband, by the uniform unit of 1 micrometer, and is also capable of removing the possible noise which can be caused by the analog circuit system. The low-pass filter operated well in the various modes of the Bluetooth RF embedded Baseband chip such as sleep mode, normal mode, and high-speed mode at 12MHz, 24MHz, and 48MHz respectively.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.3
• /
• pp.533-541
• /
• 2001

In this paper, we proposed lowpass filter using all-pass sums of flat delay characteristics. this filter consisted of all-pass filter of parallel structure, the general analog filter is impossible to adjust the phase and the delay, using the Proposed filter, it has advantage to adjust them. And, we compared and analyzed this filter with passband width and magnitude characteristics, and the relation of group delay characteristics and cut-off frequency. Also, in order to obtain desired cut-off frequency, forming the weighing, we obtained desired cut-off frequency and group delay characteristics.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.148-155
• /
• 2014

In this research a signal processing system is designed for detecting the ultrasonic signal envelope using Xilinx's Zynq SoC(system on chip). As a design tool, Vivado IDE(integrated design environment) is used to hierarchically design the whole signal processing system. The proposed system consists of a Zynq-internal ADC, an FIR(finite impulse response) BPF(band pass filter), an absolute value calculator, an FIR LPF(lpw pass filter), and the Kalman filter. Under this configuration, two design schemes, HW design scheme with LPF as a final stage and HW/SW co-design scheme with a Kalman filter as a final stage, are compared in terms of the performance and efficiency. As a result, envelope detecting performances of the two schemes are proved to be almost same, but the HW/SW co-design is verified to be much more efficient than the HW design considering the much smaller time consumption during system design.

• Journal of Korea Society of Industrial Information Systems
• /
• v.2 no.2
• /
• pp.21-29
• /
• 1997

최근들어 디지털 영상 처리에 대한 필용성이 날로 증가하고 있으며, 디지털 영상 압축은 영상 정보의 저장과 전송을 위해 반드시 필요하다. CCITT와 ISO에 의해 만들어진 JPEG에서는 그래이스케일과 칼라 정지 영상 압축을 위한 표준안을 제안하였으며 약 1/10에서 1/50정도의 압축률하에서 시각적인 저하 없이 다양한 응용 분야에 적용할 수 있다. 본 논문에서는 영상의 고주파 부분을 감소시켜 영상에서의 공간 중복성을 높여 압축률을 높일 수 있는 방안을 제안하였다. 고주파 부분을 감소시키기 위한 방법으로는 저역 필터를 사용하였으며, 공간영역에서의 필터로 메디안 필터와 컨벌루션을 사용하였고 주파수 영역에서의 필터로는 FFT를 사용하였다. 실험결과 저역 필터를 사용하여 고주파 부분을 감소시킬 수 있어 부가적인 압축률 향상을 얻을 수 있었다.

• Proceedings of the Korea Society for Industrial Systems Conference
• /
• 1997.11a
• /
• pp.91-101
• /
• 1997

The demand for handling images in digital form has increased dramatically in recent years. Digital image compression is required to store and transmit mass information in different from general information. JPEG(Joint Photographic Experts Group) committee founded by CCITT and ISO is define the still-image standard compression/restoration algorithm. JPEG is proposed the standard of grayscale and color still-image compression/restoration. In the image quality, JPEG is applicable to the various applications in which compression is able to from 1/10 to 1/50 without the visible obstacle. In this paper, we proposed that the proposed method enhance the compression ratio which is reducing the higher frequency in order to increasing the spatial redundancy in the image. The proposed method is using the low pass filter in order to reducing the higher frequency. The low-pass filters are using the median filter and convolution filter in the spatial domain, FFT filter in the frequency domain. We acquired the additive compression ratio reducing the higher frequency using the low-pass filter.

• Journal of Auto-vehicle Safety Association
• /
• v.15 no.1
• /
• pp.7-15
• /
• 2023

The purpose of this study is to predict the dynamic behavior of clamshell hood system on the harsh road driving condition, and secure the safety and durability performance of the system. The equation of motion of hood system is derived and the numerical analysis is implemented to obtain the lateral movement of the hood system. Also, the actual Belgian road test results are correlated to the predicted ones, and confirm the reliability of the system. Then, the parameter study is conducted to figure out the sensitive factors to affect the dynamic behavior, and the engineering design guide to make the system robust to confine the minimum friction force generated from hood latch and maximum hood weight is suggested from this research.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2012.10a
• /
• pp.225-228
• /
• 2012

In this paper, a 10-bit digital-to-analog converter (DAC) with small area is proposed. The 10-bit DAC consists of a 8-bit decoder, a 2-bit time-interpolator, and a buffer amplifier. The proposed time-interpolation is achieved by controlling the charging time through a low-pass filter composed of a resistor and a capacitor. To implement the accurate time-interpolator, a control pulse generator using a replica circuit is proposed to minimize the effect of the process variation. The proposed 10-bit Time-Interpolation DAC occupies 61 % of the conventional 10-bit resistor-string DAC. The proposed DAC is designed using a $0.35{\mu}m$ CMOS process with a 3.3 V supply. The simulated DNL and INL are +0.15/-0.21 LSB and +0.15/-0.16 LSB, respectively.

• Journal of the Korean Association of Geographic Information Studies
• /
• v.9 no.4
• /
• pp.12-21
• /
• 2006

Recently, Very large and high resolution geological data from aerial or satellite imagery are available. Many researches and applications require to do realtime visualization of interest geological area or entire planet. Important operation of wide-spreaded terrain realtime visualization technique is the appropriate model resolution selection from pre-processed multi-resolution model hierarchy depend upon participant's view. For embodying such realtime rendering system with large geometric data, Preprocessing multi-resolution hierarchy from large scale geological information of interest area is required. In this research, recent Cubic multiresolution 4-8 tile hierarchy is selected for global planetary applications. Based upon the tile hierarchy, It constructs the selective terminal level tile mesh for original geological information area and starts to sample individual generated tiles for terminal level tiles. It completes the hierarchy by constructing intermediate tiles with low pass filtering in bottom-up direction. This research embodies series of efficient cubic 4-8 tile hierarchy construction mechanism with out-of-core storage. The planetary scale Mars' geographical altitude data and image data were selected for the experiment.