• 재활복지공학회논문지
• /
• 제3권1호
• /
• pp.1-6
• /
• 2009

본 조사는 휠체어를 사용하는 장애인이 차량을 탑승할 때 휠체어 수납에 대한 불편함을 파악하여, 향후 관련 제품 개발에 개념설계를 하고자 실시하였다. 연구는 수동휠체어를 사용하고 있으며, 자가 운전을 할 수 있는 장애인 50명을 대상으로 직접 면담하는 설문조사 방식으로 실시하였다. 그 결과 설문에 참여한 88%의 장애인이 차량에 휠체어를 수납할 수 있는 보조 장치의 개발이 필요하다고 응답하였다. 이러한 장치로써 차량 트렁크에서 로봇팔이 차량의 운전석 문까지 나와서 휠체어를 트렁크에 수납하는 방법을 가장 선호하였다.

• 한국정밀공학회지
• /
• 제16권12호
• /
• pp.204-213
• /
• 1999

This paper suggests a numerical method of finding optimal geometric path and minimum-time motion for a manipulator arm. To find the minimum-time motion, the optimal geometric path is searched first, and the minimum-time motion is searched on this optimal path. In the algorithm finding optimal geometric path, the objective function is minimizing the combination of joint velocities, joint-jerks, and actuator forces as well as avoiding several static obstacles, where global search is performed by adjusting the seed points of the obstacle models. In the minimum-time algorithm, the traveling time is expressed by the linear combinations of finite-term quintic B-splines and the coefficients of the splines are obtained by nonlinear programming to minimize the total traveling time subject to the constraints of the velocity-dependent actuator forces. These two search algorithms are basically similar and their convergences are quite stable.

• 한국정밀공학회지
• /
• 제19권12호
• /
• pp.38-44
• /
• 2002

A walking training robot is proposed to provide stable and comfortable walking supports by reducing body weight load partially and a force control of an arm of walking training robot using sliding mode controller is also proposed. The current gait training apparatus in hospital are ineffective for the difficulty in keeping constant unloading level and for the constraint of patients' free walking. The proposed walking training robot effectively unloads body weight during walking. The walking training robot consists of an unloading manipulator and a mobile platform. The manipulator driven by an electro-mechanical linear mechanism unloads body weight in various levels. The mobile platform is wheel type, which allows patients to walt freely. The developed unloading system has advantages such as low noise level, lightweight, low manufacturing cost and low power consumption. A system model fur the manipulator is established using Lagrange's equation. To unload the weight of the patients, sliding mode control with p-control is adopted. Both control responses with a weight and human walking control responses are analyzed through experimental implementation to demonstrate performance characteristics of the proposed force controller.

• 한국정밀공학회지
• /
• 제19권4호
• /
• pp.187-194
• /
• 2002

In this paper, a motion control algorithm is developed using a fuzzy control and the optimization of performance function, which makes a robot arm avoid an unexpected obstacle when the end-effector of the robot arm is moving to the goal position. During talc motion, if there exists no obstacle, the end-effector of the robot arm moves along the predefined path. But if these exists an obstacle and close to talc robot arm, the fuzzy motion controller is activated to adjust the path of the end-effector of the robot arm. Then, the robot arm takes the optimal posture far collision avoidance with the obstacle. To show the feasibility of the developed algorithm, numerical simulations are carried out with changing both the positions and sites of obstacles. It was concluded that the proposed algorithm gives a good performance for obstacle avoidance.

• 한국정밀공학회지
• /
• 제15권1호
• /
• pp.78-86
• /
• 1998

This paper presents a numerical method of the minimum-time trajectory planning for a robot manipulator amid obstacles. Each joint displacement is represented by the linear combination of the finite-term quintic B-splines which are the known functions of the path parameter. The time is represented by the linear function of the same path parameter. Since the geometric path is not fixed and the time is linear to the path parameter, the coefficients of the splines and the time-scale factor span a finite-dimensional vector space, a point in which uniquely represents the manipulator motion. The displacement, the velocity and the acceleration conditions at the starting and the goal positions are transformed into the linear equality constraints on the coefficients of the splines, which reduce the dimension of the vector space. The optimization is performed in the reduced vector space using nonlinear programming. The total moving time is the main performance index which should be minimized. The constraints on the actuator forces and that of the obstacle-avoidance, together with sufficiently large weighting coefficients, are included in the augmented performance index. In the numerical implementation, the minimum-time motion is obtained for a planar 3-1ink manipulator amid several rectangular obstacles without simplifying any dynamic or geometric models.

• 제어로봇시스템학회논문지
• /
• 제6권9호
• /
• pp.796-802
• /
• 2000

A master-slave system for teleoperation is usually used to control the robor's motion on remote place such as abyss, outer space etc.. When the slave robot is a humanoid one, it can make a better performance if the configuration of the master arm is similar to that of the slave arm and of the human. The master arm proposed in this paper has a type to be put on the human arm, that is, the exoskeleton type, and has a combination of serial joint and parallel mechanism imitating the human's arm structure of muscles and bones, so called hybrid mechanism so that it can follow arm's movement effectively. But it is easy to solve the forward kinematis of the parallel structure because relating equations are implicit functions. In order to solve that, the virtual joint angle corresponding to human arm's joint is introduced and a sequential computation step is employed in calculating virtual joint angles and the posture of the end effector. Also validity is checked up through computational simulation.

• 전기학회논문지
• /
• 제65권7호
• /
• pp.1270-1276
• /
• 2016

This paper proposes the controller design for regulation control of two-link robot arm using sum of squares (SOS) control method that takes into account the input constraint. The existing studies of two link robotic arm system used a linear model of all the non-linearity of the system is linearized. For a linear controller, since the model of the system is simplified, it is possible to design a controller in consideration of constraints on the disturbance. However, there is a limit to the performance using a linearized model for a system with a complex nonlinear properties. To compensate for this in the case of using a fuzzy LMI method, it is necessary to have a large number of linear models and thus there is a disadvantage that the system becomes complicated. To solve these problems, we represents a two-link robot arm system with a polynomial model using a Taylor series expansion and design the controller considering the case where the magnitude of the control input is limited using SOS method. We demonstrate by simulations the feasibility of the proposed algorithm.

• 대한기계학회논문집A
• /
• 제37권4호
• /
• pp.569-579
• /
• 2013

이 연구에서는 스마트폰과 Wi-Fi통신을 이용한 로봇의 조종과 장착된 카메라를 통한 영상처리 기술에 대하여 서술하였다. 제안된 로봇은 바퀴와 4족을 환경에 따라서 선택적으로 사용할 수 있도록 메커니즘을 구성하였다. 카메라의 스트림 데이터 중 이미지 데이터만을 이용하도록 네트워크를 형성하였으며 영상처리 기법을 응용하여 약병을 구분하고, 로봇 팔을 이용하여 약병을 사용자에게 전달해주는 로봇 메커니즘에 대해서도 서술한다. 본 논문에서 개발된 영상처리 알고리즘과 처리는 별도의 컴퓨터 없이 스마트폰만을 이용하여 구현이 가능하도록 설계하였으며 스마트폰의 강력한 기능과 연산능력을 최대로 활용하여 약병 로봇의 지능화 및 소형화 방안을 제시하였다.

• 재활치료과학
• /
• 제7권4호
• /
• pp.79-91
• /
• 2018

목적 : 본 연구에서는 상지 로봇 치료가 아급성기 뇌졸중 환자의 상지기능에 단기적으로 미치는 영향을 알아보는 것이었다. 연구방법 : 본 연구는 뇌졸중 편마비 진단을 받고 1회 1시간씩 상지 로봇 치료와 과제 지향적 훈련(task-oriented training)를 받았던 환자 20명의 의무기록을 이용한 후향적 연구로서, 중재 전/후의 3차원 동작분석검사 결과 값을 토대로 두 중재간의 변화량을 비교 하였다. 결과 분석은 기술 통계와 대응표본 t검정을 사용하여 결과 값을 파악 하였다. 결과 : 연구 결과 상지 로봇 치료를 한 경우 팔 뻗기를 하는 동안 팔굽관절 움직임의 순발력, 효율성, 부드러움에서 향상을 보였으며, 과제 지향적 훈련(task-oriented training)과 비교 하였을 때 팔굽관절의 부드러움에서 유의한 차이를 보였다(p<.05). 결론 : 단기적 상지 로봇 치료는 아급성기 뇌졸중 환자의 팔뻗기 시 팔굽관절 움직임에 효과를 보였으며, 추후 장기적인 연구를 통해 상지 기능의 움직임 개선에 대한 효과 입증이 필요하다.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1993년도 추계학술대회 논문집
• /
• pp.333-338
• /
• 1993

In this paper, we introduce an industrial three degree of freedom manipulator which loads/unloads various freight on an AGV(automated Guided Vehicle). We design and implement the industrial controller for the manipulator with P-I) gain variation method. Since this battery-powered manipulator is opten driven in an instufficient power condition, the gravity effects on the robot joints can be a significant problem. The objectives of this paper are twofold : the presentation of a PI)-controller which can compensate the gravity effects, and the design and implementation of an industrial three degree of freedom manipulator for loading/unloading.