• Proceedings of the Korea Water Resources Association Conference
• /
• 2018.05a
• /
• pp.86-86
• /
• 2018

본 연구는 한국의 도시재생과 스마트 물 관리의 정책 분석을 위하여 도시재생과 스마트 물 관리의 등장 배경, 주요 현안 및 연계성을 모색하고 도시재생방안으로서 스마트 물 관리체계의 가능성을 검토하는 것을 목적으로 한다. 1950년대의 도시재건(Urban Reconstruction)과 1970~80년대의 도시재개발(Urban Renewal, Urban Redevelopment) 등의 정비 사업은 물리적 환경정비에 초점을 맞추었다. 그러나 1990년대 환경문제가 세계적 이슈로 등장하면서 교외지역 난개발 문제에 대한 대응책이 필요하게 되었고 도시의 물리 환경적, 산업 경제적, 사회 문화적 측면을 부흥시키는 도시재생 접근법이 출현하였다. 한국 정부는 2017년부터 시작한 '도시재생 뉴딜사업'의 일환으로 스마트 기술을 적용한 도시재생사업을 통해 스마트도시 선도국가 도약과 세계적 흐름에 부합하는 도시성장을 기대하고 있다. 1980년대 초 등장한 스마트 기술은 2000년대 들어와 스마트 도시, 스마트 인프라, 스마트 그리드 등의 분야로 확대, 진보하였다. 물 분야의 스마트 기술은 2009년 스마트워터그리드 이니셔티브(Smart Water Grid Initiative)의 발족과 함께 IBM, CISCO, Intel 등의 IT 기반 물 관리 워킹그룹 형성, Suez, Veolia, Siemens 등 수처리 기업의 스마트워터그리드 분야 진출 모색과 함께 발전하기 시작하였다. 이후 2012년 유엔 스마트 물 관리 포커스 그룹(ITU-T SG 5)의 스마트 물 관리 표준화 연구가 착수되었고 한국은 국토교통부 건설교통기술 연구 개발사업 중 하나로 스마트 물 관리 장기 연구 사업을 시작하였다. 스마트 물 관리는 수자원 및 상하수도 관리의 효율성 제고를 위하여 스마트 미터, 센서, 디지털지도제작 등 ICT를 이용한 차세대 물 관리시스템이라고 정의할 수 있다. 구체적인 대상 분야를 고려한다면 하천수, 우수, 지하수, 하폐수처리수, 해수담수 등 다양한 수자원의 관리, 물의 생산과 수송, 사용한 물의 처리 및 재이용 등 물 관리 전 분야를 포함한다. 그러나 스마트 물 관리의 용어와 개념을 처음으로 도입한 미국 등 선진국과 관련기업들은 스마트 물 관리를 '스마트 워터 미터, 센서, 첨단 모델링, 수문 지도제작, 스마트 관개농업, 자동화 로봇 등 다양한 기술을 통합적으로 운영하는 지능적인 수자원 관리를 위한 정보네트워크'로 정의한다. 일찍이 도시재생으로의 패러다임 전환을 실시한 영국 및 일본과 달리 한국의 도시재생은 개념, 구성요소, 범위, 사업방식 등의 여러 가지 측면에서 아직 형성단계에 있다. 또한 한국의 스마트 물 관리 논의는 개념정립 측면에서 심층적 논의가 거의 부재하였다. 기존의 논의들은 수자원 혹은 상하수도서비스 분야에서의 연구결과와 기술개발성과를 기계적으로 적용하고 확대하는 측면만을 부각시켰다. 그러나 이와 같은 스마트 물 관리에 대한 논의는 정보통신기술과 물 관리 서비스를 단편적으로 연결하고 적용범위를 제한할 수도 있다는 점에서 한계성이 있다. 본 연구는 국내외 문헌검토를 바탕으로 한국의 도시재생과 스마트 물 관리의 정책을 분석하고 지금까지 별개로 간주된 두 개념의 장점을 융합하여 향후 지속가능한 도시개발 사업으로서의 가능성을 검토하고자 한다.

• The Journal of the Korea institute of electronic communication sciences
• /
• v.16 no.5
• /
• pp.889-898
• /
• 2021

Currently, due to the demographic cliff phenomenon in Republic of Korea, A serious defense vacuum could occur due to the lack of South Korean military's personal strength. As a result, The South Korean military has a possibility to implement the polices the prepare for military provocations and preemptive strikes by the North Korean military while resolving the South Korean defense vacuum caused by the shrinking population. It seems like that the only way for the South Korean military to solve the shortage of personal strength due to the population decline is to reduce the number of Mechanized Units(MU) other than, infantry and automate, and autonomous driving the weapons system of the Mechanized Units(MU). In this paper, we propose the use of the virtual autonomous driving of the self propelled artillery K-9's in self selection of the position and occupation of position and self positioning in the position. At the same time in this paper, the self propelled artillery K-9 model robot is used to simulate and the explain about the operation method, necessity and feasibility in the self propelled artillery K-9. In addition, this paper predicted the problems that would arise if the South Korean military deployed autonomous driving self propelled K-9, in real combat.

• Journal of the Korea Institute of Building Construction
• /
• v.23 no.2
• /
• pp.175-185
• /
• 2023

Upon analyzing labor productivity in the construction industry across OECD countries, it was found that in 2019, labor productivity per employee in the South Korean construction industry was lower than that of major developed countries when adjusted for purchasing power parity(PPP). Specifically, when benchmarked against other countries at a base of 100, South Korea scored 76.9 in the United States, 88.4 in Japan, and 85.1 in the OECD average. Notably, South Korea ranked 25th in labor productivity per employee in the construction industry among 35 OECD countries in 2019, indicating a low standing. A comparative analysis of the construction market size and labor productivity in the construction industry across OECD countries revealed that larger construction markets did not necessarily correlate with higher labor productivity. To enhance labor productivity in the construction industry, this study proposed the active implementation of smart construction technology at construction sites and the promotion of on-site assembly work using off-site construction(OSC) technology, rather than traditional on-site labor. Moreover, it was recommended that the development of modular construction methods and technologies be expanded. In the future, if off-site production methods and modules are further developed through advanced robotics and factory automation, labor productivity is anticipated to increase due to the restructuring of production methods, such as manufacturing.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.29 no.7
• /
• pp.980-991
• /
• 2023

To prevent accidents near the quay caused by a ship, ports are generally designed and constructed through navigation and berthing safety assessment. However, unpredictable accidents such as ship collisions with the quay or personal accidents caused by ropes still occur sometimes during the ship berthing or mooring process. Automatic mooring systems, which are equipped with an attachment mechanism composed of robotic manipulators and vacuum pads, are designed for rapid and safe mooring of ships. This paper deals with a displacement and velocity measurement system for the automatic mooring device, which is essential for the position and speed control of the vacuum pads. To design a suitable system for an automatic mooring device, we first analyze the sensor's performance and outdoor environmental characteristics. Based on the analysis results, we describe the configuration and design methods of a displacement and velocity measurement system for application in outdoor environments. Additionally, several algorithms for detecting the sensor's state and estimating a ship's velocity are developed. The proposed method is verified through some experiments for displacement and speed measurement targeted at a moving object with constant speed.

• Journal of Venture Innovation
• /
• v.5 no.4
• /
• pp.179-189
• /
• 2022

In the face of revolutionary changes in industry, the relationship between labor and income needs to be reconceptualized in the period of social revolution. The absolute decrease in labor due to the absence of labor is caused by automation, smartization, AI, robot labor, etc., which we must accept whether we want to or not. However, while gross social product and capital of the state or society increase, individual income is likely to decrease. During this transformation period, the state or politics must prepare for the problems caused by the decline in individual income. Until now, there have been various levels of discussion on social welfare or social security from the perspective of welfare or assistance. Attempts or studies at the experimental level have been conducted at the level of many countries or local governments and have found positive and negative effects. There is no basic income system that is widely implemented at the national level, and various discussions are taking place from a future-oriented perspective. Therefore, I propose to look at it from a new perspective based on the perspective so far. We explored that it is part of a positive approach to examine the importance and necessity of basic income in terms of working hours, quality of labor, income, quality of life, value of spare time, and work-life balance. The goal is to actively accept the absolute lack of working hours, replacement of mechanical labor, and polarization due to changes in the industry paradigm, and to look at the problems that come from a positive perspective. If we are going to accept it anyway, we should not look at these issues as short-sighted, but prepare them preemptively and establish a primitive plan from a long-term and overall perspective. Smartphones have changed the world over the past decade and have been lost, but wouldn't there be a lot of new discoveries? Shouldn't we think of it as a great opportunity to improve the quality of life through technological changes?

• Proceedings of the Korean Institute Of Construction Engineering and Management
• /
• autumn
• /
• pp.180-185
• /
• 2003

The increase of traffic over a bridge has been emerged as one of the most severe problems in view of bridge maintenance, since the load effect caused by the vehicle passage over the bridge has brought out a long-term damage to bridge structure, and it is nearly impossible to maintain operational serviceability of bridge to user's satisfactory level without any concern on bridge maintenance at the phase of completion. Moreover, bridge maintenance operation should be performed by regular inspection over the bridge to prevent structural malfunction or unexpected accidents front breaking out by monitoring on cracks or deformations during service. Therefore, technical breakthrough related to this uninterested field of bridge maintenance leading the public to the turning point of recognition is desperately needed. This study has the aim of development on automated inspection system to lower surface of bridge superstructures to replace the conventional system of bridge inspection with the naked eye, where the monitoring staff is directly on board to refractive or other type of maintenance .vehicles, with which it is expected that we can solve the problems essentially where the results of inspection are varied to change with subjective manlier from monitoring staff, increase stabilities in safety during the inspection, and make contribution to construct data base by providing objective and quantitative data and materials through image processing method over data captured by cameras. By this system it is also expected that objective estimation over the right time of maintenance and reinforcement work will lead enormous decrease in maintenance cost.

• Journal of Bio-Environment Control
• /
• v.29 no.4
• /
• pp.399-405
• /
• 2020

Recently, it is difficult to produce uniform scions and rootstocks with high quality in a greenhouse due to weather extremes. The closed transplant production system is useful for producing scions and rootstocks with desirable morphological characteristics by environment control regardless of weather outside. In this study, we investigated transpiration rates and growth of cucumber and tomato scions and rootstocks grown under different light intensity conditions for precise irrigation control in a closed transplant production system. Hanging system to measure continuously the weight of plug tray consisting of seedlings and substrate with load-cell was installed in each growing bed. Using this system, we confirmed initial wilting point of cucumber and tomato seedlings, and conducted subirrigation when moisture content of substrate was not below 50%. The irrigation time of cucumber scions and rootstocks were 7 and 6 days after sowing, respectively. In tomato scions and rootstocks grown under PPF (photosynthetic photon flux) 300 μmol·m^-2·s^-1, the irrigation time were 5, 8, 11, and 13 days after sowing. Increasing light intensity increased transpiration rates and differences of transpiration rates by light intensity was higher in tomato seedlings. The growth of cucumber and tomato seedlings was promoted by increasing light intensity, especially, hypocotyl elongation and stem thickening was affected by light intensity. Cumulative transpiration rate of plug tray in cucumber and tomato seedlings was increased by increasing light intensity, and daily transpiration rate per seedling was regressed by 1st-order linear equation with high correlation coefficient. Estimation of transpiration rates by weighing continuously plug tray of vegetable seedlings can be useful to control more accurately irrigation schedule in a closed transplant production system.

• Management & Information Systems Review
• /
• v.38 no.1
• /
• pp.23-41
• /
• 2019

Smart Factory is different from existing factory automation in that it aims to produce personalized products with minimum time and cost through ICT. However, previous researches, not from consumers but from product suppliers, have focused on technology trends and technology application methods. In order for Smart Factory to be successful, it must go beyond supplier-focus to meet the needs of consumers. In this study, we surveyed the purchase intention of the personalized product manufactured by smart factory. Influencing factors of purchase intention were drawn as consumers' need for uniqueness, innovativeness, need for touch, and privacy concern, based on previous research. As results of data analysis, it was confirmed that respondents were willing to purchase personalized products, and that consumers' need for uniqueness, innovativeness, and need for touch had a significant impact on purchase intention of personalized products. Our findings can be summarized as follows. First, Consumers' need for uniqueness was found to have positive effects(${\beta}=0.168$) on purchase intention of personalized products. The desire to differentiate themselves from others will be reflected in their personalized products. Therefore, consumers with a higher desire for uniqueness tend to be more willing to purchase personalized products. Second, consumer innovativeness was found to have positive effects(${\beta}=0.233$) on purchase intention of personalized products. Personalized shoes suggested in this study is a new type of personalized product that is manufactured by the latest information and communication technologies such as multi-function robots and 3D printing. Therefore, consumers seeking innovative new experiences are more willing to purchase personalized products. Third, need for touch was found to have positive effects(${\beta}=0.299$) on purchase intention of personalized products. In a smart factory environment, prosuming participation is given to consumers. If consumers participate in the product development process and reflect their requirements on the product, they are expected to increase their purchase intention by virtually satisfying the need for touch. Fourth, privacy concern was found to have no significantly related to purchase intention of personalized products. This is interpreted as a willingness to tolerate the risk of exposing personal information such as home address, telephone number, body size, and preference for consumers who feel highly useful in personalized products.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.4
• /
• pp.225-232
• /
• 2024

This study focuses on the determination of the fracture mode in composite laminates using deep learning. With the increase in the use of laminated composites in numerous engineering applications, the insurance of their integrity and performance is of paramount importance. However, owing to the complex nature of these materials, the identification of fracture modes is often a tedious and time-consuming task that requires critical domain knowledge. Therefore, to alleviate these issues, this study aims to utilize modern artificial intelligence technology to automate the fractographic analysis of laminated composites. To accomplish this goal, scanning electron microscopy (SEM) images of fractured tensile test specimens are obtained from laminated composites to showcase various fracture modes. These SEM images are then categorized based on numerous fracture modes, including fiber breakage, fiber pull-out, mix-mode fracture, matrix brittle fracture, and matrix ductile fracture. Next, the collective data for all classes are divided into train, test, and validation datasets. Two state-of-the-art, deep learning-based pre-trained models, namely, DenseNet and GoogleNet, are trained to learn the discriminative features for each fracture mode. The DenseNet models shows training and testing accuracies of 94.01% and 75.49%, respectively, whereas those of the GoogleNet model are 84.55% and 54.48%, respectively. The trained deep learning models are then validated on unseen validation datasets. This validation demonstrates that the DenseNet model, owing to its deeper architecture, can extract high-quality features, resulting in 84.44% validation accuracy. This value is 36.84% higher than that of the GoogleNet model. Hence, these results affirm that the DenseNet model is effective in performing fractographic analyses of laminated composites by predicting fracture modes with high precision.