• The Journal of the Korea institute of electronic communication sciences
• /
• 제7권5호
• /
• pp.999-1004
• /
• 2012

In this paper, camera modules and lens's images were analyzed for the compensation of distortion image by wide angle lens based WDR(Wide Dynamic Range) with high resolution sensor(2-Mega CMOS Image sensor). Due to wide angle ($176^{\circ}$) of designed wide angle camera modules, the compensation result of distorted image was analyzed, and the application of these modules was proposed for smart NUX(Natural User eXprience).

• Korean Journal of Optics and Photonics
• /
• 제8권2호
• /
• pp.81-87
• /
• 1997

This paper presents the optimum initial design containing the first and third order properties of the four-group video camera zoom system using lens modules, and its real lens design. The optimum initial design with focal length range of 6.1693 to 58.4065 mm is derived by assigning appropriate first order quantities and third order aberrations to each module along with the specific constraints required for optimization. By scaling the focal length of each lens group, an initial real lens selected for each group has been designed to match its focal length into that of the each lens module, and then combined to establish an actual zoom system by adjusting the air space between the groups at all zoom positions. The combination of the separately designed groups results in a system which satisfies the first order properties of the zoom system consisting of original lens modules. As a result, by residual aberration correction, we could obtain a zoom system useful in video zoom camera employing the rear focus method.

• Korean Journal of Optics and Photonics
• /
• 제16권1호
• /
• pp.34-42
• /
• 2005

This paper presents the optimum initial design containing the first and third order properties of the three-group zoom system using lens modules, and the real lens design of the system. The optimum initial design with focal length range of 4.3 mm to 8.6 mm is derived by assigning appropriate first and third order quantities to each module along with the specific constraints required for the system. An initial real lens selected for each group has been designed to match its focal length and the first orders into those of the each lens modules, and then combined to establish an actual zoom system by adjusting the air space between the groups at all zoom positions. The combination of the separately designed groups results in a system which satisfies the first order properties of the zoom system composed of the original lens modules. As a result, by residual aberration correction, we could obtain a zoom system useful in compact digital zoom cameras and mobile phone cameras employing the rear focus method.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• 제38권2호
• /
• pp.219-225
• /
• 2014

An automatic combination and assembly system for phone-camera lens modules was developed. The system enables the assembly of the relative orientation of the individual lenses making up the lens module. Conventional assembly systems assemble a lens module from eight assembly units. The developed system reduces this number to half by combining each lens and a spacer into a single assembly unit. Also, the number of transfer stages for sequential assembly is minimized without increasing the assembly time. Therefore, high productivity and a footprint that is only about 25 % of that of a conventional assembly system can be realized. The system features a modular design to allow it to cope with rapid changes in the market. Only a few components, such as the picker and guide, need to be replaced for changing to a new assembly model.

• Elastomers and Composites
• /
• 제44권4호
• /
• pp.366-372
• /
• 2009

The present study covers the optimal design for a lens module in a mobile phone camera by using the design of experiments (DOE) and finite element (FE) analysis. FE analyses are performed to investigate the effect of design parameters on the amount of torque required to assemble a barrel and a housing part. The DOE approach is then performed to optimize the design parameters in order to maintain an appropriate torque with less variations.

• The Optical Journal
• /
• 통권117호
• /
• pp.34-36
• /
• 2008

카메라폰의 폭발적인 보급은 폰카메라 렌즈모듈 시장의 동반성장을 가져왔고 대부분 일본에 의존하던 기존의 광학렌즈 시장과 달리 폰카메라 렌즈분야에서는 국내 업체가 시장을 장악하고 있다. 그중에서도 (주)디오스텍(대표.박일, www.diostech.co.kr)은 설립 5년 만에 국내 시장 점유율 1위, 세계 시장에서 3위를 기록하는 등 글로벌 업체로서의 면모를 갖췄다. 올해 3월 허두철 사장의 뒤를 이어 박일 사장을 새로운 사령탑으로 맞은 디오스텍은 카메라폰 렌즈시장의 우위를 발판으로 신규시장에서의 '새로운 강자'로 거듭나기 위해 더욱 발 빠른 행보를 보이고 있다.

• Journal of the Korea Society for Simulation
• /
• 제23권4호
• /
• pp.131-142
• /
• 2014

Phone camera lens module is assembled with a barrel, multiple lenses, multiple spacers and a shield. The major processes of manufacturing system are injection molding, coating and assembly processes, and each process has multiple machines. In this paper, we introduce a scheduler based on simulation model which can be used for frequent rescheduling problem caused by urgent orders, breaking down of molds and failures of machines. The scheduling algorithm uses heuristic Backward-Forward method, and the objective is to minimize the number of tardy orders.

• The Optical Journal
• /
• 통권154호
• /
• pp.33-45
• /
• 2014

■ 광통신용 렌즈는 광통신 시스템에 있어서 송신단과 수신단에 사용되는 하나의 부품으로 집광/발산의 결상 기능을 지니며, 광회로 부품과 광섬유 또는 수발광소자인 LD/PD와 광섬유를 효율 좋게 저손실로 접속하는 기능을 수행함. ■ 마이크로 렌즈는 마이크로 광학의 분야에 있어 광의 집광 및 평행 광으로의 변환에 빠질 수 없는 가장 기본적인 소자로서, 마이크로 렌즈의 종류로는 마이크로 볼 렌즈, 비구면 렌즈와 GRIN 렌즈가 대표적으로 있음. ■ 렌즈에 적용되는 사양으로서 렌즈의 유효 구경, 초점(focal point), 주점(principle point), 주점에서 초점까지의 거리인 초점 거리(focal length), 가상의 법선을 기준으로 빛이 입사되는 각도인 입사각, 빛이 다른 매질을 만나 반사되는 각도인 반사각, 서로 다른 매질을 빛이 통과할 때 굴절하는 굴절각 등이 있음. ■ 렌즈 모듈의 구조는 렌즈, 스페이서(spacer), 아리리스(Iris), 백링(back-ring), 바렐(Barrel)로 구성함. ■ LD 모듈에서 광원에 패브리 페로(FP)로 사용하는 것에는 볼 렌즈가, DFB 광원으로 사용하는 것으로는 비구면 렌즈가 사용하고 있음. 이를 위해 PON용에서는 G-PON의 OLT, ONU 측, GE-PON의 OLT측에는 비구면 렌즈가 사용되나 GE-PON의 ONU측에는 볼 렌즈가 주로 사용되고 있음. ■ 2012년 볼 렌즈 시장은 수량 기반으로 2011년 대비 9.7% 증가한 7,350만 개, 금액기반으로는 17.0% 증가한 3,125만$를 기록하였음. ■ 2012년 비구면 렌즈 시장은 수량 기반으로 2011년 대비 22.0% 증가한 2,220만 개, 금액 기반으로는 32.0% 증가한 8,900만$를 기록하였음. ■ 2012년 광통신용 렌즈 시장(볼 + 비구면)은 수량 기반으로 2011년 대비 12.3% 증가한 9,570만 개, 금액 기반으로는 27.7% 증가한 1억 2,063만$이었음.

• The Optical Journal
• /
• 통권87호
• /
• pp.37-43
• /
• 2003

• Journal of the Korea Society for Simulation
• /
• 제16권2호
• /
• pp.65-74
• /
• 2007

Virtual manufacturing (VM) is a powerful technology for developing a new product, new equipment and new manufacturing system, and three-dimensional (3D) simulation is a core technology in VM. 3D simulation involves both mechanical simulation and discrete event simulation. This paper introduces a case study of implementing 3D simulation for developing an automatic assembly line in a Korean optical factory. This factory produces a lens module that is the part of a phone-camera. 3D simulation technology is applied from the early stage of development. In the conceptual design and the initial design phases for individual equipment, 3D mechanical simulation using $CATIA^{(R)}$ and $IGRIP^{(R)}$ is conducted. 3D discrete event simulation with $QUEST^{(R)}$ is applied to the detailed design of the equipment and of the whole system. The focus of the simulation is to verify the technical and economical feasibility of the new automatic system. As a result, the takt time is reduced to the quarter of the manual system, and the number of workers in a line is reduced tremendously.