• KIPS Transactions on Computer and Communication Systems
• /
• v.7 no.6
• /
• pp.145-154
• /
• 2018

A loosely coupled message broker system is a popular method for integrating distributed software components. Especially, a distributed broker structure with multiple brokers with active-standby or active-active message replicas are used to enhance availability as well as message processing performance. However, there are problems in both active-standby and active-active replica structure. The active-standby has relatively low processing performance and The active-active structure requires a high synchronization overhead. In this paper, we propose an active-active structure of replicas to increase the availability of the brokers without compromising its high fault-tolerancy. In the proposed structure, standby replicas process the requests of the active replicas so that load balancing is achieved without additional brokers, while the distributed coordinators are used for the synchronization process to decrease the overhead. We formulated the overhead incurred when synchronizing messages among replicas, and the formulation was used to support the experiment results. From the experiment, we observed that replicas of the active-active structure show better performance than the active stand-by structure with increasing number of users.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.29 no.7 s.144
• /
• pp.1008-1017
• /
• 2005

When we develop 2D pattern from replica of human body with small pieces, it is inevitable to have some replica pieces overlapped or departed. In this study, the optimized method of 2D pattern development from the 3D replica pieces was investigated using dress-form. Among six arrangement methods, anchoring two vertexes of a replica to neighboring vertexes of a next replica induces the optimized 2D pattern by evenly distributing stress across the 3D replica pieces. Anchoring neighboring vertexes resulted in automatic widening k overlapping (W & O) the interspaces among replicas of dress-form, thereby stress was distributed more evenly than any other method. W&O arrangement method was verified to be the best by examining the 3D space distribution images between body surface and twelve experimental garments.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2017.11a
• /
• pp.322-325
• /
• 2017

C와 C++는 컴파일된 결과물의 실행 속도가 타 프로그래밍 언어로 작성된 것보다 빠르고 기존의 시스템과 호환성이 좋다는 점 등의 장점을 갖고 있기 때문에 많은 프로그래머들로부터 여전히 사랑받는 프로그래밍 언어이다. 하지만 C와 C++로 생성된 프로그램은 버퍼 오버플로 취약점과 같은 다양한 메모리 커럽션 취약점을 갖고 있기 때문에 쉽게 외부의 공격자들에게 노출된다. 따라서 사용자가 이와 같은 언어로 생성된 프로그램을 안전하게 실행하기 위해서는 시스템에 신뢰할 수 있는 방어 기법이 미리 적용되어 있어야만 한다. 본 연구에서는 메모리 커럽션 취약점을 이용한 공격을 탐지하기 위한 기법 중 하나인 Multi-variant Execution Environment (MVEE)를 소개하고, MVEE의 핵심 요소 기술인 레플리카 생성 기법들에 대하여 설명하고 비교 분석하고자 한다.

• Proceedings of the Korean Institute of Surface Engineering Conference
• /
• 2015.11a
• /
• pp.190-190
• /
• 2015

본 연구에서는 AZ31 마그네슘 합금의 내식성을 향상시키기 위하여 플라즈마 전해산화(PEO, plasma electrolytic oxidation)법을 이용하여 다양한 용액에서 양극 및 음극 펄스전류를 인가하여 형성하였다. PEO피막 내부에 형성된 기공의 모양 및 크기를 에폭시 레플리카법을 이용하여 관찰하였다. PEO 피막 내부의 기공의 크기는 용액의 pH가 증가할수록 작아졌으며 균열의 크기는 증가하였다.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.36 no.4
• /
• pp.443-455
• /
• 2012

In this research, a woman matched to the average Korean standard size specification of 21-24 years of age was scanned using Cyberware. Rapidform 2004 was used to separate the body zone into fit zone, action zone and design zone, depending on the function of the lower body. Each divided body zone expanded radially using 'offset' by 1.60mm at the cross section of the waist, and 6.36mm at the hip level. Resultant ease values were 1cm and 4cm along the waistline and hipline (respectively), as recommended in previous research. 2C-AN program and Yuka CAD was used to develop a pant pattern from the enlarged 3D body surface blocks. A total of five pants were constructed using conventional fabrics for light weight formal pants. The appearance of the experimental pants were evaluated by five clothing-major evaluators using a questionnaire that consisted of 21 questions. In addition, functional aspects of the experimental pants were also evaluated by wearer while performing five postures for the measurement of ease of movement. It was found that, the method of regional offset and suggested 3D to 2D pattern development generate reasonably good pant patterns. Among the pattern block arrangements, the method B was evaluated as the best way to generate formal pants from the tight-fit pattern, which fit smoothly over the lower body for maintaining ease of movement.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.51 no.8
• /
• pp.11-19
• /
• 2014

In recent SONAR (sound navigation and ranging) systems, wideband active SONAR systems has received more attention than narrowband SONAR systems due to the remarkable detection performance in terms of range resolution. However, the wideband SONAR systems usually requires a huge amount of computational burden in order to achieve their own superiority. To cope with this drawback of the wideband SONAR systems, this paper proposes a fast target detection and velocity estimation method using an extended replica in wideband hyperbolic frequency modulation active SONAR system. Computer simulation shows that the proposed method can be implemented by a highly reduced computational complexity with a little performance degradation in target detection and velocity estimation compared to the conventional filter bank method.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2017.07a
• /
• pp.89-92
• /
• 2017

This study critically analyzes the present situation of the domestic game industry that infringes game nature or diversity, which is the essence of game contents such as copycat, auto play, excessive billing inducement, indiscriminate advertisement developed by focusing on commercial aspect, It suggests the necessity of creative and various game development environment. It suggests development direction for the development of domestic game industry through game case analysis which shows the possibility of game media out of existing success formula and does not concentrate only on commerciality and makes effort to give new fun to users.

• Journal of the Mineralogical Society of Korea
• /
• v.4 no.1
• /
• pp.51-55
• /
• 1991

Transmission electron microscopic study including single particle electron diffraction and morphological observation using replica and thin section was carried out for the Sancheong halloysite. Halloysite tube generally consists of inner circular and outer polygonal leaves. Primary triangular or concave voids are found between inner and outer leaves. Crosssection of halloysite tubes whose diameters are smaller than 500${\AA}$ are generally circular, whereas those larger than 500${\AA}$ are polygonal. Electron diffraction pattern of thick polygonal halloysite tube shows that it has a 2-layer monoclinic structure as suggested by previous workers.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2020.07a
• /
• pp.45-48
• /
• 2020

최근 마이크로서비스 아키텍처(Microservice Architecture)를 도입하는 프로젝트가 많아짐에 따라 컨테이너 오케스트레이션 도구인 쿠버네티스의 필요성이 증대되고 있다. 쿠버네티스 환경을 구성하고 서비스를 테스트 및 배포하기 위해서는 클러스터링을 하고 yaml파일을 작성하고 적용하여 자원을 생성하는 등의 작업이 필요하다. 이렇게 반복되는 작업을 자동화하기 위해 기존에는 쉘스크립트를 사용하는데, 이를 사용하기 위해서는 쿠버네티스 및 인프라에 관한 기초지식이 있어야 하는 문제점이 있다. 본 논문에서는 마이크로서비스를 위한 웹 기반의 배포 시스템을 제안한다. 웹을 통해 배포하고 테스트할 수 있어 기초지식이 없어도 사용할 수 있다. 웹에서 프로젝트 개발자로부터 도커 이미지와 사용할 포트번호 및 레플리카 개수를 입력받아 배포를 요청하면 쿠버네티스 환경에 배포하고, 필요한 자원들이 배포가 완료되면 엔드포인트를 제공한다. 그리고 배포된 서버의 엔드포인트에 요청을 전송하고 응답이 오는 것을 확인할 수 있어 활용성이 높다. 이 시스템은 쿠버네티스를 이용하여 복수 개의 파드(Pod)를 유지하여 가용성을 보장하고 빠르게 배포가 가능하게 한다. 또한 이미지가 업데이트되면 웹에서 요청하여 클러스터에 새 버전의 이미지로 배포한다.

• The Journal of Korean Academy of Prosthodontics
• /
• v.54 no.3
• /
• pp.210-217
• /
• 2016

Purpose: The aim of this study was to evaluate the marginal and internal adaptation of monolithic zirconia restoration made without physical model by digital intraoral scanner. Materials and methods: A prospective clinical trial was performed on 11 restorations as a pilot study. The monolithic zirconia restorations were fabricated after digital intraoral impression taking by intraoral scanner (TRIOS, 3shape, Copenhagen, Denmark), computer-aided designing, and milling manufacturing process. Completed zirconia crowns were tried in the patients' mouth and a replica technique was used to acquire the crown-abutment replica. The absolute marginal discrepancy, marginal gap, and internal gap of axial, line angle, and occlusal part were measured after sectioning the replica in the mesiodistal and buccolingual direction. Statistical analysis was performed using Kruskal-Wallis and Mann-Whitney U test (${\alpha}=.05$). Results: From the adaptation analysis by replica, the statistically significant difference was not found between mesiodistal and buccolingual sections (P>.05), but there was significant difference among the measurement location (P<.01). The amount of absolute marginal discrepancy was larger than those of marginal gap and internal gap (P<.01). Conclusion: Within the limitations of this study, the adaptation accuracy of model-free monolithic zirconia restoration fabricated by intraoral scanner exhibited clinically acceptable result. However, the margin of zirconia crown showed tendency of overcontour and cautious clinical application and follow up is necessary.