• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2000.11a
• /
• pp.102-105
• /
• 2000

A simple digital control system has been developed for the frequency stabilization of an internal mirror He-Ne laser. The system is based on one chip microprocessor with embedded Basic interpreter. To stabilize the laser output frequency, the signal such as power difference or beat frequency between two modes is supplied and processed by a microprocessor, and control signal is fed to the heating coil would round the laser tube for adjusting the spacing of the laser cavity mirror. Newly developed frequency stabilization system is totally digitized. The system and the frequency stability performance are briefly described.

• Journal of the Korean Society for Precision Engineering
• /
• v.27 no.10
• /
• pp.7-13
• /
• 2010

We report a hybrid DPSSL with a pulse parameter variable LD seed, all-fiberized polarization-maintained pulsed Yb-doped fiber preamplifier chains, and a bulk Nd:$YVO_4$ power amplifier. Pulse parameter of LD seed was controlled by direct current modulation. The hybrid DPSSL generates 1064 nm laser pulses with an average power of 40W, a pulse duration of 20-40ns, and a repetition rate of 100-500kHz.

• Proceedings of the KIEE Conference
• /
• 1998.07e
• /
• pp.1693-1695
• /
• 1998

콘덴서에 고압으로 축적된 에너지를 부하로 전달해주는 스위칭기술은 고전압 펄스 파워 분야에서 아주 필수적이다. 이러한 관점에서 볼 때, 트리거 갭 스위치는 흔히 연구실에서 용이하게 사용할 수 있고, 갭 간격을 조정함에 의해 방전전압을 가변할 수 있는 장점이 있다. 그러나, 트리거 갭 스위치는 트리거 방전없이 생기는 자가방전이 발생하거나 트리거 방전이 생겨도 주방전이 일어나지 않는 경우가 있다. 본 연구에서는 이러한 일반 트리거 갭의 단점을 보완하고 확실하게 동작하는 갭 스위치의 제작에 필요한 데이터 확보를 위해 Nd:YAG 레이저를 트리거 갭 스위치 음극에 조사해 전극사이의 거리 g와 압력에 따른 최소트리거전압 $V_{T.min}$의 특성을 파악하였다.

• Proceedings of the Korean Society of Propulsion Engineers Conference
• /
• 2003.05a
• /
• pp.164-167
• /
• 2003

Thermal shock is a physical phenomenon that occurs upon a rapid, large temperature and pressure change or in the quenching condition of materials. In this study, thermal shock fracture resistance and thermal shock fracture toughness were evaluated by using laser irradiation. The temperature distribution of a specimen was detected using type K and C thermocouples. The irradiated surfaces were observed by SEM. It is concluded that the critical laser power necessary to fracture can be the major factor of thermal shock resistance and thermal shock fracture toughness of materials.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.439-441
• /
• 2003

본 연구에서는 Thulium(Tm$^{3+}$ )이 첨가된 광섬유를 이용, Upconversion blue 레이저의 개발을 위해 fiber 길이 및 파워 변화에 따른 최적화된 설계 기준 값을 찾기 위한 시뮬레이션 코드를 개발하고 그 해석을 행하였다. 1140nm의 여기광원을 이용하여 여기하였을 때 광섬유 길이 40cm에서 약 100mW의 발진 문턱값을 갖으며 1W의 여기 광원에 대해 60mW의 출력 특성이 예상된다.

• Proceedings of the Optical Society of Korea Conference
• /
• 2003.02a
• /
• pp.24-25
• /
• 2003

새로이 합성된 비선형 광학 물질인 옥타폴 분자들의 1차 초분극율ß을 Hyper-Rayleigh scattering(HRS) 방법을 이용하여 측정하였다. 시료의 흡수와 형광효과를 피하기 위해, 광원으로 1560nm를 사용하였다. YAG(1064nm) 레이저로 펌핑한 Raman-Cell(D$_2$ gas) 장치를 제작하여, 높고 안정한 파워의 1560nm를 발생하여 실험에 사용하였다. 또한 1064nm를 이용하여 측정한 결과와 비교하였다. (중략)

• Proceedings of the KIEE Conference
• /
• 2007.07a
• /
• pp.1580-1580
• /
• 2007

광디스크를 재생 및 기록 가능한 기기는 그동안 IT에 용이한 컴퓨터 중심의 ODD(Optical Disc Drive)를 기반으로 급속히 발전해 오고 있었으나, 홈 엔터테인먼트의 발전과 이에 대한 관심의 증폭으로 AV용의 레코더가 2000년대에 등장하게 되었다. AV용 DVD 레코더의 경우 PC용 ODD에 비해 소음 및 세트 내부 온도 등 환경의 영향을 많이 받고, 여러 규격들을 만족해야 하기 때문에 구현에 많은 어려움과 제약이 따른다. 그리고 DVD 레코더는 방송 등을 스트림 기록해야 하므로 기록 신뢰성에 더욱 엄격함을 요구한다. 이에 기록 품질에 관련된 중요 Factor들이 존재하게 된다.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2001.05a
• /
• pp.329-332
• /
• 2001

In this paper, it's shown that the saturable absorber Nd:LSB has a capability as a saturable absorber in Q-switching system. In the passively Q-switched 1.3${\mu}{\textrm}{m}$ Nd:YAG laser with saturable absorber, we theoretically investigated the optimized output mirror, peak power, output power, pulse width and output efficiency. The passively Q-switched Nd:YAG laser with saturable absorber Nd:LSB gives peak power of 30MW and pulse width of 6.23 ps at 30cm resonator length and output mirror reflectivity 98%. Consequently the output energies are 143, 200 and 209 $\mu$J at loss of 2.2%, 2.1% and 1.5%, respectively.

• Journal of Advanced Marine Engineering and Technology
• /
• v.30 no.5
• /
• pp.629-635
• /
• 2006

Manufacture of motor by laser has been studying realization that was demands on market for lightening and miniaturization. Moreover. early in the 1980s. manufacture of parts for automobiles by laser welding was already successfully introduced. The purpose of this study was to develop production technology of the high quality laminated stator core for motor by pulsed Nd:YAG laser heat source. In the event of adjusting defocus and voltage to control humping in laser welding of the laminated core. sound bead could be obtained. but deep penetration was not. Therefore. explosive evaporating plasma was controlled by adjustment of peak power on pulse width. Particularly, because explosive evaporating plasma induced high peak power, made molten metal in keyhole scatter. a suitable adjustment of peak power was required to obtain sound bead. As a results of experiment. sound bead and deep penetration could be obtained.

• Journal of the Korean Society for Precision Engineering
• /
• v.21 no.3
• /
• pp.171-179
• /
• 2004

Micro-stereolithography technology has made it possible to fabricate a freeform 3D microslructure. This technology is based on conventional stereolithography, in which a UV laser beam irradiates the open surface of a UV-curable liquid photopolymer, causing it to solidify. In micro-stereolithography, a laser beam of a few $\mu m$ diameter is used to solidify a very small area of the photopolymer. This is one of the key technological elements, and can be achieved by using a focusing lens. Thus, the solidification phenomena of the liquid photopolymer must be carefully investigated. In this study, the photopolymer solidification phenomena in response to variations in the scanning pitch of a focused laser beam was investigated experimentally. The effect of layer thickness on the solidification width and depth was also examined. These studies were conducted under the conditions of relatively lower laser power and relatively higher scanning speed. Moreover, the photopolymer solidification phenomena for the relatively higher laser power and lower scanning speed was investigated, too. In this case, comparing to the case of lower laser power and higher scanning speed, the photopolymer absorbed large amount of irradiation energy of the laser beam. These results were compared with those obtained from a photopolymer solidification model. From these results, a new laser-scanning scheme was proposed according to the shape of the 3D model. Samples by each method were fabricated successfully.