• Journal of Navigation and Port Research
• /
• v.29 no.5 s.101
• /
• pp.383-388
• /
• 2005

To install a radar reflector on small ships, such as a small fishing vessel, a fishery buoy, and a barge ship for fishery, it is very important to develop the optimal system which may determine a proper installation location. For this, the response characteristics how waves have an effect on the small ships should be accurately analyzed. In this paper, we analyze the dynamic behaviors of small ships, which may be caused by irregular waves. To do this, we investigate how a barge ship responses to wavelength, water depth, and directions of incoming waves. The analyzed results shall be utilized to evaluate an effect on a radar cross section when we install an radar reflector on a barge ship for fishery and a small ship.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.23 no.2
• /
• pp.125-132
• /
• 2003

This study introduces a simulation model of radar responses from subsurface voids in concrete for their frequency variations. In this model, resolution and attenuation characteristics due to frequency variations are analyzed at each material interface which has different electromagnetic property. This model aims at the selection of best frequency of radar which can analyze the thickness of voids in concrete from radar responses. It can also be applied to estimate the limitation of propagation depth of radar on subsurface voids in concrete. The computed results show the radar images obtained by using a radar signal processing technique using convolution.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.3 no.4
• /
• pp.849-858
• /
• 1999

There are several improved designs of passive radar reflector available, but their performance is ultimately limited by the cross-section area and this is governed by the size of the buoy and the acceptable windage. Therefore it is needed to investigate the low-cost, low power, a active device that can be improve the reliability of response. Active Radar Reflector(AAR) consists of a microwave amplifier with separate receive and transmit antennas. It is a device which automatically transmits a signal in response to an interrogating signal received. It was intended to improve the consistency of the radar return from the buoy and the small craft, particularly in poor sea conditions. And it directly improves safety of navigation at sea.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.26 no.4A
• /
• pp.809-816
• /
• 2006

More than effectively judging the existence of reinforcing bars under multi boundary layers and void shapes in concrete, this study aims to develop the analysis algorithm of radar response on multi boundary layers in reinforced concrete and radar capable of estimation of the shape of specific voids in plain concrete. To detect or estimate reinforcing bars and void shapes in these conditions, the simulation analysis model of transmission and reflection wave of electromagnetic radar is used. This radar simulation model is carried out with reinforced or non reinforced concrete of various boundary conditions and void shapes. And, the output signals (images) of radar simulation results are calculated and represented by convolution method. As the results, it is clarified that this simulation analysis technique can be used to analyze radar response on multi boundary layers in reinforced concrete and void shapes in concrete.

• Journal of Navigation and Port Research
• /
• v.30 no.5 s.111
• /
• pp.357-362
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to enhance marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2018.11a
• /
• pp.114-116
• /
• 2018

선박용 레이더 주파수 대역에서 운영되고 어떤 레이더 물표의 탐지와 식별을 향상시키기 위한 송수신 겸용 장치(일종의 마이크로파 송수신기)로 해상의 선박에서 발사된 레이더 펄스를 수신한 후, 이 신호를 분석하여 분석된 신호에 대응되는 인식신호를 수신된 신호와 동일한 주파수의 전파에 변조시켜 응답하는 장치를 국산화 개발하였다.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.50 no.4
• /
• pp.171-181
• /
• 2013

Recently, ground penetrating radar(GPR) has been widely used in detecting metallic and nonmetallic buried landmines and a number of related researches have been reported. A novel preprocessing method is proposed in this paper to flag potential locations of buried mine-like objects from GPR array measurements. GPR operates by measuring the reflection of an electromagnetic pulse from discontinuities in subsurface dielectric properties. As the GPR pulse propagates in the geologic medium, it suffers nonlinear attenuation as the result of absorption and dispersion, besides spherical divergence. In the proposed algorithm, a logarithmic transformed regression model which successfully represents the time-varying signal amplitude of the GPR data is estimated at first. Then, background signals may be densely distributed near the regression model and candidate signals of targets may be far away from the regression model in the time-amplitude space. Based on the observation, GPR signals are decomposed into candidate signals of targets and background signals using residuals computed from the estimated value by regression and the measurement of GPR. Candidate signals which may contain target signals and noise signals need to be refined. Finally, targets are detected through the refinement of candidate signals based on geometric signatures of mine-like objects. Our algorithm is evaluated using real GPR data obtained from indoor controlled environment and the experimental results demonstrate remarkable performance of our mine-like object detection method.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2006.06b
• /
• pp.241-246
• /
• 2006

This paper describes two kinds of personal hand-held electronic devices to support marine leisure safety. The one is Radar response-type safety device triggering by the pulse signal from a commercial 9GHz-band Radar to provide quick search and rescue with combined civilian-government-military fleets. The other one is M-RFID (Marine Radio Frequency IDentification) based safety electronic device using 900MHz Tx/Rx with spread spectrum frequency hopping and GPS. Through the field tests at sea using Korea Coast Guard's warship the operating performances are verified. Further plan for practical use of each device was also discussed.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2002.03a
• /
• pp.155-160
• /
• 2002

• Proceedings of the Korea Water Resources Association Conference
• /
• 2023.05a
• /
• pp.92-92
• /
• 2023

본 연구에서는 대한민국 도시 유역에 대하여 딥러닝 네트워크 기반의 분산형 수문 모형을 개발하였다. 개발된 모형은 완전연결계층(Fully Connected Layer)으로 연결된 여러 개의 장단기 메모리(LSTM-Long Short-Term Memory) 은닉 유닛(Hidden Unit)으로 구성되었다. 개발된 모형을 사용하여 연구 지역인 중랑천 유역을 분석하기 위해 1km² 해상도의 239개 모델 격자 셀에서 10분 단위 레이더-지상 합성 강수량과 10분 단위 기온의 시계열을 입력으로 사용하여 10분 단위 하도 유량을 모의하였다. 모형은 보정과(2013~2016년)과 검증 기간(2017~2019년)에 대한 NSE 계수는각각 0.99와 0.67로 높은 정확도를 보였다. 본 연구는 모형을 추가적으로 심층 분석하여 다음과 같은 결론을 도출하였다: (1) 모형을 기반으로 생성된 유출-강수 비율 지도는 토지 피복 데이터에서 얻은 연구 지역의 불투수율 지도와 유사하며, 이는 모형이 수문학에 대한 선험적 정보에 의존하지 않고 입력 및 출력 데이터만으로 강우-유출 분할과정을 성공적으로 학습하였음을 의미한다. (2) 모형은 연속 수문 모형의 필수 전제 조건인 토양 수분 의존 유출 프로세스를 성공적으로 재현하였다; (3) 각 LSTM 은닉 유닛은 강수 자극에 대한 시간적 민감도가 다르며, 응답이 빠른 LSTM 은닉 유닛은 유역 출구 근처에서 더 큰 출력 가중치 계수를 가졌는데, 이는 모형이 강수 입력에 대한 직접 유출과 지하수가 주도하는 기저 흐름과 같이 응답 시간의 차이가 뚜렷한 수문순환의 구성 요소를 별도로 고려하는 메커니즘을 가지고 있음을 의미한다.