• The KIPS Transactions:PartD
• /
• v.13D no.2 s.105
• /
• pp.175-182
• /
• 2006

Radars are used to detect the motion of the low flying enemy planes in the military. Radar-detected raw data are first processed and then inserted into the ground tactical C4I system. Next, these data we analyzed and broadcasted to the Shooter system in real time. But the accuracy of information and time spent on the displaying and graphical computation are dependent on the operator's capability. In this paper, we propose the Flying Object Tracking Management System that allows the displaying of the objects' trails in real time by using data received from the radars. We apply the coordinate system translation algorithm, existing communication protocol improvements with communication equipment, and signal and information computation process. Especially, radar signal duplication computation and synchronization algorithm is developed to display the objects' coordinates and thus we can improve the Tactical Air control system's reliability, efficiency, and easy-of-usage.

• The Journal of Engineering Geology
• /
• v.27 no.3
• /
• pp.217-231
• /
• 2017

The subsidence of ground in urban area can be caused by the occurrence of the cavity and the change in ground volumetric water content. The objective of this study is the detection of abnormal area of ground in urban area where the cavity or the change in ground volumetric water content is occurred by the ground penetrating radar signal. GPR survey is carried out on the test bed with a circular buried object. From the GPR survey, the signals filtered by the bandpass filtering are measured, and the methods consisting of gain function, time zero, background removal, deconvolution and display gain are applied to the filtered signals. As a result of application of the signal processing methods, the polarity of signal corresponds with the relation of electrical impedance of the cavity and the ground in test bed. In addition, the relative permittivity calculated by GPR signal is compared with that of predicted by volumetric water content of the test bed. The relative permittivities obtained from two different methods show similar values. Therefore, the abnormal area where the change in ground volumetric water content is occurred can be detected from the results of the GPR survey in case the depth of underground utilities is known. Signal processing methods and estimation of relative permittivity performed in this study may be effectively used to detect the abnormal area of ground in urban area.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.23 no.6
• /
• pp.185-190
• /
• 2023

Recently, tracking radar requires the development of millimeter wave tracking radar to acquire target information with high resolution in various environments. The development of millimeter wave tracking radar requires the development of transmission and receiving components that can be applied to the millimeter wave tracking radar, as well as verification of the applicability of the tracking radar. In order to verify the applicability of the developed transmitting and receiving components, it is necessary to develop a signal acquisition device that can control the transmitting and receiving components using the operating concept of a tracking radar and check the status of the received signal. In this paper, we implemented a signal acquisition device that can confirm the applicability of components developed for millimeter wave tracking radar. The signal acquisition device was designed to process in real time the OOOMHz center frequency and OOMHz bandwidth signals input from 4 channels to verify the received signal. In addition, component control applying the tracking radar operation concept was designed to be controlled by communication such as RS422, RS232, and SPI and generation of control signals for the transmission and receiving time. Lastly, the implemented signal acquisition device was verified through a signal acquisition device performance test.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.48 no.6
• /
• pp.124-132
• /
• 2011

In a modern electronic warfare, radar signal environments become more denser and complex. Therefor the capability of reliable signal analysis techniques is required for ES(Electronic warfare Support) system to identify and analysis individual emitter signals from received signals. In this paper, we propose the new signal grouping algorithm to ensure the reliable signal analysis and to reduce the cost of the signal processing steps in the ES. The proposed grouping algorithm uses KDE(Kernel Density Estimator) and its CDF(Cumulative Distribution Function) to compose windows considering the statistical distribution characteristics based on the radar frequency modulation type. Simulation results show the good performance of the proposed technique in the signal grouping.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.10 no.7
• /
• pp.1104-1110
• /
• 1999

When a FM-CW radar is used to measure the target distance, the nonlinearity relationship between the VCO control voltage and the output frequency makes an adverse effect on the measurement accuracy. Recently, many nonlinearity correction schemes using signal processing techniques and dedicated hardwares have been studied. This paper presents a signal processing technique to compensate for the VCO nonlinearity using a reference signal. To demonstrate the validity of the presented technique, several experiments were conducted and the results show reduction of the distortion in the range profile and the resolution improvement.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.13 no.1
• /
• pp.140-146
• /
• 2010

The multi-function radar can detect and track the low RCS targets. For this purpose the multi-function radar uses the pulse train waveform. because this waveform has high dynamic range and good SNR(Signal to Noise Ratio). But the spurious signals can also be detected by processing the pulse train waveform. Thus the multi-function radar signal processor must have the high SFDR(Spurious Free Dynamic Range). This paper describes the development of the multi-function radar signal processor having the high SFDR.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2014.10a
• /
• pp.890-893
• /
• 2014

In this paper, we present a signal processing algorithm for a marine radar system, in which the evaluation of probability of collision as well as target detection and tracking are performed. Moreover, the digital signal processor that implements the algorithm is proposed. As simulation environment, a mechanically scanning antenna utilizing FMCW signal is used, conducting the beamforming operation with 1 degrees intervals. Test board consists of DSP chips and FPGA, which enable the implemented system to operate in real-time.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2001.06a
• /
• pp.20-23
• /
• 2001

전자공학 기술의 응용으로 자동차를 지능화하고, 안정성을 현격하게 높이려는 연구가 주목받고 있다. 이러한 자동차의 지능화에서 중요한 요소 기술이 되는 것이, 자동차의 주변 즉 전방/후방의 차량이나 장애물을 인식하는 주변감시 기술이다. 본 논문에서는 이러한 자동차용 장애물 인식 레이더 시스템인 FMCW 레이더 신호처리시스템을 개발한다. 이 차량용 시스템이 실제 도로 환경에서 이용되기 위해서는 무엇보다 시스템의 안정된 신뢰도가 요구되며, 즉, 기상환경 및 다양한 도로환경에 무관하게 안정적인 시스템 신뢰도를 유지하기 위한 개발에 그 최종적인 목적이 있다. 이에 레이다 시스템을 통해 자차와의 거리 및 상대속도를 인지함으로서 최종적인 장애물(선행차, 교행차) 및 자차의 주행상황을 통해 안정적인 주행경보시스템을 개발한다.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.11
• /
• pp.1171-1177
• /
• 2009

A missile warning radar is an essential sensor for active protection system to detect antitank missile in all weather environments. This paper introduces missile warning radar for main battle tank and presents the results of the design and implementation of the radar signal processor using high speed multi-DSP. The key algorithms include adaptive CF AR, weighted linear fitting algorithm, S/W tracking capability, and threat decision and present test result.

• Proceedings of the Acoustical Society of Korea Conference
• /
• autumn
• /
• pp.155-158
• /
• 2001

소나나 레이더분야에서의 방위 정보 추정에 있어서 직접신호와 반사신호가 있는 경우의 연구가 많이 이루어져왔다 특히 반사 신호 성분 중에 직접신호와 상관도가 높은 성분이 있는 스펙큘러 반사 성분이 있는 경우에 대한 연구가 많이 이루어져왔다. 이런 연구들은 대부분이 Block 데이타 처리 구조를 가지고 있다 따라서 방위가 시간에 따라서 변하는 경우 이런 Block 처리 구조를 가지고 처리하는 것은 오류를 범할 가능성이 높다. 본 논문에서는 recursive 구조를 갖는 알고리즘을 스펙큘러 환경에 강하도록 수정하여 시간에 따라 방위가 변하는 환경에 적용할 수 있도록 만든 알고리즘을 제안한다.