• Journal of IKEEE
• /
• v.15 no.3
• /
• pp.218-226
• /
• 2011

In this paper, the leaky electric field intensity of outdoor CATV facilities on CDMA mobile service band defined in technical regulation related with CATV is investigated if appropriate or not. From experimental and theoretical analysis results, Maximum allowable power level of CATV leakage should be -110dBm/1.23MHz. Also, the CATV leakage intensity thresholds, which may not nearly give an impact on the uplink performance of CDMA mobile base station for outdoor background noise of -100~-80dBm/1.23MHz to be measured in outdoor environment, couldn't conform to the current CATV technical regulation. Therefore, the leakage intensity in the current CATV technical regulation is rated as a too much low level in view of an overly worst case.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.40 no.7
• /
• pp.1424-1432
• /
• 2015

As the wireless communication technologies are being studied for application to maritime communication networks in a fusion of marine industries and IT technology, interference coordination techniques have been studied in the maritime heterogeneous networks. In this paper, we develop a simulator for measuring, verifying and evaluating performance of a maritime heterogeneous network. Unlike other previous simulators, the developed simulator applies enhanced inter-cell interference coordination (eICIC) that are being introduced in the 3GPP Release 10 for mitigating the cross-tier interference between ships. Furthermore, we investigate the effects of almost blank subframes (ABS) and cell range expansion (CRE) on the throughput of small cells in maritime heterogeneous networks by using the developed simulator.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.3
• /
• pp.733-739
• /
• 2011

Recently, a lots of research proposals and results on mobile sensor network are actively announced. The most of such works are based on general-purposed network simulators such as ns-2, mathlab, etc. But, It is not easy to model and simulate the detail activities of each sensor node, data deliveries between them, and its cost such as power consumption and resource utilization, so that the simulation results of those simulators show the limited aspects of overall networks features or performance metrics. In this paper proposed, power consumption of each node, performance, mobility, and location information in operation-level of the network that can simulate a wireless sensor network simulator platform. Because the network routing algorithm analysis of being developed in an existing becomes available, the proposed simulator can usability in the new network routing algorithm development.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.30 no.1A
• /
• pp.10-27
• /
• 2005

In this paper, we propose a high level design architecture of WCDMA(UMTS) base station modem and synchronization algorithms applied to the proposed architecture. Also analysis of each synchronization algorithm and performance evaluation of fixed point designed modem are shown. Since the target system is base station modem, each synchronization algorithm is designed for its stable operation. To minimize implementation complexity, optimum fixed point design for best operation of synchronization algorithms is performed. We performed symbol level link simulation with fixed point designed modem simulator for data rate of 12.2kbps, 64kbps, 144kbps, and 384kbps. We compared performance results to the minimum requirements specified in 3GPP TS 25.104(Release 5). Extensive computer simulation shows that the proposed modem architecture has stable operation and outperform the minimum requirement by 2 dB. The proposed modem architecture has been applied in the implementation of WCDMA reverse link receiver modem chip successfully.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.22 no.3
• /
• pp.292-298
• /
• 2011

In this paper, a voltage controlled injection-locked oscillator(VC-ILO) is proposed for wideband applications. From the control of the free-running frequency by a varactor diode, the wide frequency locking range can be obtained for low-level injected signals. The proposed VC-ILO is implemented on an FR-4 substrate with a thickness of 0.8 mm. The free-running frequencies of the oscillator is 2.39~2.52 GHz at the control voltage of 0~5 V. While the frequency locking range of over 50 MHz is presented for -10 dBm injected signal level at a fixed frequency, the locking range of over 90 MHz can be achieved for -30 dBm by controlling the free-running frequency.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2010.05a
• /
• pp.490-492
• /
• 2010

A swing level controlled voltage-mode transmitter is proposed to support a stub series-terminated logic channel with center-tapped termination. This transmitter provides a swing level control to support the diagnostic mode and improve the signal integrity in the absence of the destination termination. By using the variable parallel termination, the proposed transmitter maintains the constant output impedance of the source termination while the swing level is controlled. Also, the series termination using an external resistor is used to reduce the impedance mismatch effect due to the parasitic components of the capacitor and inductor. To verify the proposed transmitter, the voltage-mode driver, which provides eight swing levels with the constant output impedance of about $50{\Omega}$, was implemented using a 70nm 1-poly 3-metal DRAM process with a 1.5V supply. The jitter reduction of 54% was measured with the swing level controlled voltage-mode driver in the absence of the destination termination at 1.6-Gb/s.

• Journal of the Korean Applied Science and Technology
• /
• v.38 no.5
• /
• pp.1273-1281
• /
• 2021

The purpose of this study was to increase the power of color and examine the long-lasting power, which is a disadvantage of one-pack acid hair dye by using chestnut shell pigment. For this, hair dyeing power was measured using a spectrophotometer, the optical density(O.D.) value was measured to examine the degree of fading of the hair, and the elasticity of the hair was analyzed by measuring the tensile strength. As a result of comparing the results of applying different leaving times and treatment methods to the hair samples of each level, the experimental group that was heat-treated for 20 minutes showed the highest dyeing power. Then, it was confirmed in the order of 40 minutes of natural exposure, 10 minutes of heat treatment, and 20 minutes of natural exposure. And it was also confirmed that the color expression visually improved as it went up to level 10. However, at level 10, it was confirmed that some water loss occurred even after 3 days and the tensile strength was low. These findings that indicated the beauty industry will popularize a one-step acid hair dye containing various natural dye ingredients to help maintain modern people's well-being and healthy mind and body.

• Journal of the Korean Institute of Gas
• /
• v.23 no.3
• /
• pp.46-50
• /
• 2019

In this study, the strength stability of an LPG mini tank with a storage capacity of about 250 kg was analyzed by FEM. According to the results of the FEM analysis, it is preferable that the corner radius of the LPG mini tank having a storage capacity of 250 kg is designed to be 175 to 205 mm. Generally, the larger the corner radius of the end plate of the gas storage tank, the higher the safety of the strength, but the volume or capacity of the tank is reduced. Therefore, it is important to derive the optimum design data. Further, in order to securely design the strength of the gas tank, the thickness of the tank is designed to be thick. However, when the thick steel sheet is used, the material and the transportation costs are increased. The result shows that it is preferable to select the optimum thickness of the steel sheet from 4.5 to 5.5 mm. Using the level gauge type of column on the central axis of the gas tank, the safety strength of the LPG tank can be enhanced as much as twice, compared with the tank of the existing level gauge to measure the liquid level by piercing the side wall of the tank.

• KIPS Transactions on Software and Data Engineering
• /
• v.5 no.8
• /
• pp.385-392
• /
• 2016

Market analysis for a business plain is required for the success in the modern world. Most important part in this analysis is pedestrian traffic counting. A traditional way for this is counting it in person. However, it causes high labor costs and mistakes. This paper proposes an automatic algorithm to measure the pedestrian traffic count using images with webcam. The proposed algorithm is composed of two parts: pedestrian area detection and movement tracking. In pedestrian area detection, moving blobs are extracted and pedestrian areas are detected using HoG features and Adaboost algorithm. In movement tracking, multi-level matching and false positive removal are applied to track pedestrian areas and count the pedestrian traffic. Multi-level matching is composed of 3 steps: (1) the similarity calculation between HoG area, (2) the similarity calculation of the estimated position with Kalman filtering, and (3) the similarity calculation of moving blobs in the pedestrian area detection. False positive removal is to remove invalid pedestrian area. To analyze the performance of the proposed algorithm, a comparison is performed with the previous human area detection and tracking algorithm. The proposed algorithm achieves 83.6% accuracy in the pedestrian traffic counting, which is better than the previous algorithm over 11%.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2015.05a
• /
• pp.113-113
• /
• 2015

공공수역 수질오염 관리에 있어 비점오염원 관리의 중요성이 크게 부각되고 있다. 새만금호 유역은 농경지비율이 40%로서 넓기 때문에 농업비점오염 관리가 중요하다. 농업비점오염 저감을 위한 기법 연구는 국내에서 그 간 상당 수준으로 진행되었지만, 그 기법을 실행할 주체인 농업인이나 지역주민의 역량이나 농업비점오염의 인지도에 대한 연구는 부족한 실정이다. 본 연구는 새만금유역에서 농업비점오염과 관련된 주체들 간의 정보의 소통과 흐름에 대하여 분석해보고, 또한 농업오염 교육 전후에 있어서 지역주민과 농업인의 농업비점오염에 대한 인식도와 교육효과에 대해서 살펴보았다. 먼저, 농업비점오염과 관련된 주체들 간의 지식흐름은 매크로레벨 즉, 정책입안자, 전문가 레벨에서 관련정보가 정체되어 있었고, 실제 농업비점오염 관련 저감 기법이나 정책을 실행하는 주체인 마이크로레벨의 농업인과 지역주민, 이를 지원하는 시군 공무원, 지역전문가 등 매소레벨을 지원하기 위한 정보로 가공 전달되지 못하고 있었다. 농업부서와 환경부서 사이의 농업비점오염에 대한 인식도의 차이가 크게 나타났으며, 특정 분야를 중심으로 활발한 소통이 있는 반면, 정보의 의도적 차단, 자기조직의 대응을 위한 형식적, 임시적 소통이 이루어지고 있었다. 귀농인과 친환경농업인에 대한 교육을 통하여 농업비점오염에 대한 인식도는 교육 전 38.1%에서 교육 후 100%로, 교육 후 농업비점이 오염원이라는 인식도도 친환경농업인 91%, 귀농귀촌인 78%로 응답하였다. 농업비점오염원 관리가 수질개선에 미치는 효과에 대하여는 친환경농업인은 5점 만점에 3.67점, 귀농귀촌인은 4.05점, 농업비점오염원 관리가 필요한지에 대하여 친환경농업인은 4.05점, 귀농귀촌인은 4.09점으로 두 집단 모두 농업비점오염원 관리가 필요하다고 응답하였다. 반면, 친환경 농업은 저감기법의 오염 저감 효과는 높게 인식하였지만, 직접 실행해 볼 의사는 3.4점, 저감 기법을 주위에 소개나 권고할 의사는 3.5점이었다. 또한, 실행 가능한 저감 기법으로는 퇴액비 사용, 완효성 비료사용, 녹비작물재배 등의 순이었다. 저감기법이 어렵다고 응답한 이유는 복잡할거 같다, 귀잖을 것 같다, 추가비용으로 손해, 저감효과 신뢰성 부족, 농업은 오염원이 아니다 등으로 나타났다. 이상의 연구결과를 살펴볼 때, 주체들 간의 정보와 지식흐름을 이어줄 중간조직의 필요성과 농업인의 인식의 변화가 행동의 변화로 이어질 수 있는 교육?홍보 기법과 농업인의 수용성이 높은 저감기법의 개발과 보급이 필요함을 시사하였다.