• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.11
• /
• pp.610-615
• /
• 2016

Diverse accessories are used in automobiles, such as navigation systems, front and rear cameras, spoilers, and sun visors. Sun visors block sunlight so that drivers can drive safely with a better view, and they are used in many automobile designs. However, when large plastic products are manufactured using injection molding, there are many difficulties that develop, like weld lines, short shots, flow marks, imperfections, and distortion. In this study, a CAE simulation was conducted based on previous results to predict potential problems in the injection molding of large products. The flow characteristics up to complete charge for the melting resins were captured using a computer-aided engineering simulation. The temperature departure on the front part of a flow was about $10^{\circ}C$ and very stable. The practical ejecting time of the cold runner was about 70 seconds in the simulation. Finally, the capability of a suitable injection machine was calculated and recommended by prediction of the injection pressure and the die clamping force.

• Journal of Practical Engineering Education
• /
• v.8 no.2
• /
• pp.121-128
• /
• 2016

In injection molding process, the appearance quality issue occurs in most injection molded article. One of thermal designs for the mold was performed by increasing the cavity wall temperature with being as uniform as possible in any position. On the basis of the practical evaluation, the cavity wall temperature and finishing machined cavity surface under the optimum processing conditions are the most significant factors to avoid the appearance issue on the plastic part for a good cosmetic quality. Also, the wrong choice of gate type and location can have a considerable effect on the quality of a molded part and it's so important to keep the correct runner balance from each cavity. We've proposed the education training model of the practical tool technology course for the field oriented education to improve practical tool technology ability and optimized tooling design for injection molding quality which can be performed at the workplace substantially.

• Korean Journal of Applied Biomechanics
• /
• v.29 no.3
• /
• pp.145-155
• /
• 2019

Objective: The purpose of this study was to compare the physical characteristics (bone mineral density, joint muscle strength) and running biomechanics between older adults and young adult runners to understand the changes of running strategy by aging. Method: Bone mineral density (Dual Energy X-ray Absorptiometry, USA) of lower lower extremity and muscle strength (Cybex Humac Norm [DEXA], CSMI, USA) were measured to identify the physical characteristics of 10 elderly (age: $67.70{\pm}3.30yrs$, height: $1.68{\pm}0.04m$, mass: $67.70{\pm}3.80kg$) and 10 young adults (age: $21.20{\pm}0.42yrs$, height: $1.73{\pm}0.06m$, mass: $72.11{\pm}4.15kg$). Running data was collected by using an instrumented treadmill (Bertec, USA) and 7 infrared cameras (Oqus 300, Qualisys, Sweden). Two-way repeated ANOVA analysis was used to analyze results at a significant level of .05 with Bonferroni post hoc analysis. Results: Compared to the young adult group, the elderly group showed statistically significant difference in physical characteristics and in running characteristics. Elderly runners showed lower BMD and muscle strength compared with young runners (p<.05). In the running parameters, elderly runners tend to show shorter contact time and stride length compared with young runners (p<.05). In the joint angles, elderly runners showed smaller range of ankle motion compared with young runners (p<.05). Finally, elderly runners showed lower level of joint moment, joint power, and GRF compared with young runners in each running speed (p<.05). Conclusion: The running behavior of the elderly performed periodic running was similar to many variables of young adults. However, there were noticeable differences found in the ankle joints and most kinetic variables compared with young adult runners. This discrepancy may propose that elderly runners should consider appropriate running distance and intensity in the program.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.10
• /
• pp.42-47
• /
• 2017

In this study,we conducted an injection molding analysis of metal powder materials for the development of flanges, which are necessary adapters for optical communication. The metal powder injection molding process is a technique for producing an injection molded article having a complicated shape by mixing ceramic or stainless powder and binders. It is used to produce products which require complex processing technology or for which the productivity is low. The purpose of this study is to minimize the manufacturing processing of products which are manufactured through existing mechanical processing procedures. For the injection molding analysis, we mixed stainless STS316 metal powder with binders at a ratio of 6 to 4 to make molding materials consisting of granular pellets. Then, three-dimensional modeling and meshing were carried out to obtain the optimal injection molding analysis conditions(molding temperature, melting temperature, injection time, injection temperature, injection pressure, packing time and cooling time). As a result of the analysis, it was discovered that the inlet became available 13.29 seconds after the first injection. Also, as the flowing and packing in the melt through the sprue, runner and gate were stable, it is expected that good molds can be manufactured.

• Journal of Bio-Environment Control
• /
• v.29 no.3
• /
• pp.231-238
• /
• 2020

Strawberry (Fragaria × ananassa Duch.), a herbaceous perennial crop, is a popular fruit crop with high economical and nutritive values. This study was conducted to investigate the effect of the runner training angle (RTA) on the length of internodes and number of runners produced in strawberry 'Seolhyang' and 'Maehyang' in an attempt to achieve a higher production rate of runner plants and increase the propagation efficiency. Runners were trained for 30 days to grow at an angle of 0° (vertically upward), 45°, 90° (horizontal), 135°, or 180° (hanging down) from the upward vertical axis. The experiment was carried out in a glasshouse with 29/20℃ day/night temperatures, an average light intensity of 450 μmol·m^-2·s^-1 PPFD coming from the sun, and a natural photoperiod of 12 hours. For both 'Seolhyang' and 'Maehyang', the RTA affected number and length of runners, and number and fresh and dry weights of runner plants. Training at an angle of 135° or 180° shortened length of runners and internodes in 'Seolhyang'. These RTAs also produced runner plants with the lowest fresh and dry weights in both cultivars. The RTA did not affect the runner diameter, but affected the runner morphology in both cultivars. As compared to a RTA of 135°, a 180° RTA increased number of runner plants produced, making it the most proliferative RTA.

• Journal of Bio-Environment Control
• /
• v.27 no.2
• /
• pp.185-190
• /
• 2018

This study was conducted to investigate the optimum electrical conductivity (EC) levels of nutrient solution for growth of mother plants and increasing occurrence of daughter plants of strawberry ($Fragaria{\times}ananassa$ Duch. cv. Maehyang) using hydroponics. The mother plants of strawberry were transplanted in cultivation pot ($61{\times}27{\times}18cm$) filled with coir medium on March 22, 2017. Nutrient solution was supplied by the drip tape at $0.6dS{\cdot}m^{-1}$ of EC levels for rooting during 11 days. After rooting, the mother plants of strawberry was treated at the EC levels of 0.6, 1.2 or $1.8dS{\cdot}m^{-1}$, respectively. Growth characteristics, such as mother plants and daughter plants of strawberry were measured at 100 days after transplanting. The plant height of mother plant was significantly higher at $0.6dS{\cdot}m^{-1}$ treatment, and the crown diameter of mother plant was significantly greater at $1.8dS{\cdot}m^{-1}$ treatment. The fresh and dry weights of shoot were higher at both 0.6 and, $1.2dS{\cdot}m^{-1}$ treatments. The number of runners was not significantly different in all treatments. The fresh and dry weights of runner were heavier at $0.6dS{\cdot}m^{-1}$ than other treatments. The number of daughter plants was the highest, 16.7 at the $1.2dS{\cdot}m^{-1}$ treatment. However, the fresh and dry weights of third daughter plant were the heaviest at $0.6dS{\cdot}m^{-1}$ treatment. Although the daughter plants were a large of production at $1.2dS{\cdot}m^{-1}$ treatment, the low EC levels of strawberry were positive in terms of seedling quality during nursery. These results indicated that growth of mother plant and occurrence of daughter plants were greater at the EC $0.6dS{\cdot}m^{-1}$ nutrient solution for hydroponic cultivation of 'Maehyang' strawberry during nursery period.