• 대한생식의학회:학술대회논문집
• /
• 1995.12a
• /
• pp.37-37
• /
• 1995

• Korean Chemical Engineering Research
• /
• v.44 no.5
• /
• pp.483-488
• /
• 2006

Etching process of PMMA (Polymethyl Methacrylate) on glass surface was investigated by dry etching technique using remote plasma. To determine the etching characteristics, the remote plasma etching was conducted for various process parameters such as plasma power, reaction gas and distance from plasma generation. As the distance from the plasma generation was increased, the etch rate of PMMA was linearly decreased by radical density in plasma. PMMA has removed by reactive radicals in the plasma. The etch rate increased with plasma power because of more reactive radicals. The etch rate and surface roughness of PMMA increased with $O_2$ concentration in the etchant.

• Journal of the Korean Society of Propulsion Engineers
• /
• v.22 no.1
• /
• pp.72-79
• /
• 2018

An experimental study was performed to investigate the chemiluminescence characteristics in the spray combustion of ultransonically atomized kerosene. The radical intensity of the spray flame was measured using an ICCD camera and the amount of fuel consumed was obtained by a precise flow-rate measurement technique during combustion. Fuel consumption increased linearly with the increase in carrier-gas flow rate, and typical group combustion, which is a characteristic of spray combustion, was observed. It was found from the analysis of chemiluminescence that the maximum emission intensities of OH and CH radicals decrease, and they move downstream resulting in the increase in a vivid reaction zone as the spray flow rate increases.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.1
• /
• pp.166-172
• /
• 2013

The purpose of this study is to evaluate the treatment ability of refractory organics in hot rolling precess waste water by redox(reduction and oxidation) reaction. Metal is oxidized in an aqueous solution to generate electron which can reduce water to generate hydroxy radical. These hydroxy radical is very effective to conduct hydrogen abstraction reaction and addition reaction to the carbon - carbon unsaturated link. The surface area of metal alloy reaction material is more than enough to get equilibrium at a single treatment. The efficiency of COD treatment by redox reaction showed maximum at mild pH of pH 7 and pH 6. But it was not effective in acidic atmosphere of pH 3, 4, 5 and basic atmosphere of pH 8 or over. Redox reaction system in much more helpful in a commercial coagulation sedimentation treatment than exclusive system.

• Journal of the Korean Chemical Society
• /
• v.25 no.6
• /
• pp.383-389
• /
• 1981

Thianthrene cation radical perchlorate reacts with N-arylsulfonamides such as p-toluenesulfonanilide, benzenesulfonanilide, N-(2-methylphenyl)benzenesulfonamide, and N-phenyl-p-toluenesulfonanilide to give 5-(p-N-p-toluenesulfonamidophenyl)-(1a), 5-(p-N-benzenesulfonamidophenyl)-(1b), 5-(4-N-benzenesulfonamido-3-methylphenyl)-(1c), and 5-(p-N-phenyl-N-p-toluenesulfonamidophenyl thianthrenium perchlorate (1d), respectively. In the meantime, 1d reacts further with thiathrene cation ratical to form diperchlorate(1e). The structure of 1a~1e is very similar to 5-(p-acetamidophenyl) thianthrenium perchlorate which has been obtained from the reaction with acetanilide. However, the discrepancy in the stoichiometry between two reactions indicates that the reaction with sulfonamide appears not to proceed with a single mechanism.

• Journal of the Korean Chemical Society
• /
• v.48 no.6
• /
• pp.561-567
• /
• 2004

The influence of ultrasound frequency, dissolved gases, and initial concentration on the decomposition of sodium dodecylbenzene sulfonate(DBS) aqueous solution was investigated using ultrasound generator with 200 W ultrasound power. The decomposition rates at three frequencies(50, 200, and 600 kHz) examined under argon atmosphere were highest at 200 kHz. The highest observed decomposition rate at 200 kHz occurred in the presence of oxygen followed by air and argon, helium, and nitrogen. The effect of initial concentration of DBS on the ultrasonic decomposition was decreased with increasing initial concentration and would depend upon the formation of micelle in aqueous solution. It appears that the ultrasound frequency, dissolved gases, and initial concentration play an important role on the sonolysis of DBS. Sonolysis of DBS mainly take place at the interfacial region of cavitation bubbles by both OH radical attack and pyrolysis to alkyl chain, aromatic ring, and headgroup.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.20 no.2
• /
• pp.385-393
• /
• 2019

Potential fire, explosion and safety hazards exist in medium- or small-scale chemical plants using radical batch reaction processes due to the various conditions of materials, works or products. To minimize the potential damage, a study was conducted on qualitative hazard analysis using the HAZOP technique, which is a typical method for a qualitative risk assessment and analysis of the potential risks encountered in these chemical plants. For this purpose, a domestic chemical plant, which produces the acrylic resin by a radical batch reaction process, was selected and a risk assessment and analysis according to the procedure of HAZOP method was performed for the process. As the result of the study, to prevent the hazard, the input of inert gas and the installation of a pressure gauge were indispensable. In addition, the initiator and monomer should also be separated, and inhibiting substances and equipment are also necessary to prevent a runaway reaction.

• Journal of the Korean Chemical Society
• /
• v.43 no.1
• /
• pp.74-84
• /
• 1999

Most of the reactions involving benzotriazoles as a synthetic auxiliary have been explained by ionic mechanisms, whereas benzotriazole-mediated radical reactions have received little attention. The reaction of 1-[(aryl)(phenylseleno)methyl]benzotriazole with $Bu_3$SnH in the presence of AIBN in benzene at reflux gave 2-aminodiphenyl selenide (16-29%), 2-aminobiphenyl (9-15%), diphenyl diselenide (30-93%), 1-(arylmethyl) benzotriazole (9-39%) and tributyltin-phenyl selenide (10-36%), whereas the compounds were treated with excess molar amount of $Bu_3$SnH in the absence of AIBN to afford N-(arylmethyl)anilines (44-66%) along with diphenyl diselenide (53-100%), benzotriazole (27-35%) and 1-(arylmethyl)benzotriazole (16-33%). Similarly, treatment of 6-aryl-6-(benzotriazol-1-yl)-1-hexenyl phenyl selenides with $Bu_3$SnH in the presence of AIBN gave 6-aryl-6-phenylamino-1-hexene (9-31%) and 1-aryl-1-oxo-5-pentene (15-44%). A mechanism for the formation of the products is proposed.

• Journal of the Mineralogical Society of Korea
• /
• v.28 no.3
• /
• pp.245-253
• /
• 2015

The performance of $TiO_2$ photo-catalytic oxidation process is significantly dependent on the amount of hydroxyl radicals produced during the process, and it is an essential prerequisite to quantify its production. However, precise and accurate methods for quantification of hydroxyl radicals have not been developed so far. For this reason, this study was initiated to compare existing methods for analysis of hydroxyl radicals produced by $TiO_2$ photo-catalytic oxidation and to propose a new method to overcome the limitation of established methods. To simulate $TiO_2$ photo-catalytic oxidation process, Degussa P25 which has been widely used as a standard $TiO_2$ photo-catalyst was used with the dose of 0.05 g/L. The light source of process was UVC mercury low-pressure lamp (11 W, $2,975mW/cm^2$). The results indicate that both potassium iodide (KI)/UV-vis spectrometer and terephthalic acid (TPA)/fluorescence spectrometer methods could be applied to qualitatively measure hydroxyl radicals via detection of triiodide ion ($I_3{^-}$) and 2-hydroxyterephthalic acid which are produced by reactions of iodine ion ($I^-$) and TPA with hydroxyl radicals, respectively. However, it was possible to quantitatively measure hydroxyl radicals using TPA method coupled with high-performance liquid chromatograph (HPLC). The analytical results using TPA/HPLC method show that hydroxyl radical of 0.013 M was produced after 8 hours operation of photo-catalytic oxidation under specific experimental conditions of this study. The proposed method is expected to contribute to precise the evaluation of the performance of photo-catalytic oxidation process.

• Journal of the Korean Chemical Society
• /
• v.27 no.2
• /
• pp.142-149
• /
• 1983

Reaction of thianthrene cation radical perchlorate (1) with cumene (4), p-chlorocumene (2), and p-nitrocumene (3) hydroperoxides in acetonitrile at room temperature afforded, inter alia, thianthrene as a common product and 5-(4'-hydroxyphenyl) thianthrenium perchlorate (5) for 4, 5-(5'-chloro-2'-hydroxyphenyl) thianthrenium perchlorate (7) and 5-acetonylthianthrenium perchlorate (6) for 2 and 6 for 3, respectively. Stoichiometry of these reactions showed that 2 moles of 1 gave rise to 1mole of thianthrene and 1 mole of thianthrenium salt (or salts). Nucleophilic reactivity to 1 was found to be in the order of phenol > > p-chlorophenol ${\sim}$ acetone > > p-nitrophenol. Apart from acid-catalyzed heterolytic decomposition of hydroperoxides, small amount of homolytic decomposition products were found from 3 and 4.