• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.18 no.1
• /
• pp.79-91
• /
• 2005

The behaviors and design procedures of wale in innovative prestressed support(IPS) system are presented in this paper. Using the theory of the beam on elastic foundation, the member forces of the wale under initial pretension are evaluated. Choosing cable tensions as redundant forces, member forces subjected to earth pressure are calculated by the statically indeterminate analysis. The computer analysis model under uniform and non-uniform earth pressure is constructed using beam element for the IPS wale, tension-only element for cable, and compression-only element for soil. Axial forces and bending moments of IPS wale under initial pretension and design earth pressure are calculated. The combined stresses due to these axial force and bending moment are estimated to satisfy the design formula.

• Journal of the Korean Vacuum Society
• /
• v.15 no.2
• /
• pp.162-167
• /
• 2006

The symmetry of the conduction-band minimum of $GaAs_{1-x}N_{x}$ is probed by performing resonant Raman scattering (RRS) on thin layers of $GaAs_{1-x}N_{x}(x{\leq}0.7)$ epitaxially grown on Ge substrates. Strong resonance enhancement of the LO(longitudinal optical)-phonon Raman intensity is observed with excitation energies near the $E_0$ as well as $E_+$ transitions, However, in contrast to the distinct LO-phonon line-width resonance enhancement and activation of various X and L zone-boundary phonons brought about slightly below and near the $E_+$ transition, respectively, we have not observed any resonant LO-phonon line-width broadening or activation of sharp zone-boundary phonons near the $E_0$ transition. The observed RRS results reveal that the conduction-band minimum of GaAsN predominantly consists of the delocalized GaAs bulk-like states of ${\Gamma}$ symmetry.

• The Journal of Information Technology
• /
• v.4 no.3
• /
• pp.77-86
• /
• 2001

In this paper, Electromagnetic scattering problem by a resistive strip grating with 2 dielectric layers on a ground plane according as resistivity of resistive strip, relative permittivity and thickness of dielectric layers, and incident angles of a electric wave is analyzed by applying the PMM (Point Matching Method) known as a numerical procedure. The scattered electromagnetic fields are expanded in a series of floquet mode functions. The boundary conditions are applied to obtain the unknown field coefficients and the resistive boundary condition is used for the relationship between the tangential electric field and the electric current density on the strip. According as the relative permittivity and the thickness of layers are increased, the values of the geometrically normalized reflected power have a high value and the values of strip width are moved toward a high value going from left to right. When the resistivity of this paper has a value of zero, the numerical results of the geometrically normalized reflected power show in good agreement with those by the PMM of existing paper. Then, the most energys of the sharp variation point in minimum values of the geometrically normalized reflected power are scattered in direction of the other angles except incident angle.

• Journal of Advanced Navigation Technology
• /
• v.15 no.4
• /
• pp.543-548
• /
• 2011

In this paper, H-polarized electromagnetic scattering problems by a resistive strip grating over a grounded dielectric plane according to the strip width and grating period, the relative permittivity and thickness of a dielectric layer, and incident angles of a TE (transverse electric) plane wave are analyzed by applying the FGMM (Fourier-Galerkin Moment Method). The tapered resistivity of resistive strips in this paper varies from finite resistivity at one edge to zero resistivity at the other edge, then the induced surface current density on the resistive strip is expanded in a series of Jacobi polynomials of the order ${\alpha}=1$, ${\beta}=0$ as a kind of orthogonal polynomials. The numerical results of the normalized reflected power show in good agreement with those of existing papers.

• Journal of the Korean Arthroscopy Society
• /
• v.11 no.1
• /
• pp.45-49
• /
• 2007

We report a case of a girl with a symptomatic anomaly of medial meniscus. The complaint of the patient was pain and snapping of the knee. The anterior horn of medial meniscus has anomalous insertion which was extended to the intercondylar notch of the femur on the surface of the anterior cruciate ligament, it attached to lateral wall of medial femoral condyle. This anomalous band was not detected in MRI of knee but found during the operation. After resection of anomalous band, the symptoms completely disappeared.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.02a
• /
• pp.199-199
• /
• 2012

최근 그래핀의 대면적 합성 및 롤투롤 전사 공정의 개발로 그래핀의 상용화가 가시화 되고 있다. 하지만, 그래핀의 독특한 특성인 선형적이고 밴드갭이 없는 에너지 띠 분포 때문에 반도체 소자로서의 직접적인 적용에는 한계가 있다. 이러한 문제를 해결하기 위한 돌파구로써, 그래핀 복합체의 연구와 개발이 활발히 진행되고 있으며 본 연구에서는 그래핀 복합 적층 구조를 다룬다. 이는 디스플레이, 초고속 반도체 소자, 고성능 광전자소자 및 초고감도 센서 등 다양한 분야에 대한 그래핀의 실용화 가능성이 높아진 것을 의미한다. 특히, 높은 가시광 투과도와 낮은 면저항으로 기존 투명 전극에 대표적으로 사용되고 있는 ITO (Indium Tin Oxide)를 그래핀으로 대체하는 것에 관한 연구가 활발히 진행되고 있다. 하지만 그래핀이 높은 전자이동도를 가지는 것에 비하여 비저항과 투과도 측면에 있어서는 ITO의 성능을 뛰어넘지 못하는 실정이다. 따라서 본 연구에서는 ITO가 가지는 취약점인 기판과의 약한 접착력, 높은 취성, 기판과의 열팽창률 차이 등의 공정상 문제점을 극복하고자 하였다. 그래핀 복합 적층 필름은 플라스틱 기판 (PET) 위에 열 화학기상증착법(Chemical Vapor Deposition, CVD)을 이용하여 합성한 그래핀을 전사하고, ITO 용액을 도포한 다음 다시 그래핀을 씌워 제작하여 샌드위치 구조(sandwich structure)를 형성하였다. 완성된 필름은 광학적, 전기적 특성 분석을 수행하였다. 광학적 분석으로는 라만 분광을 이용한 그래핀 품질평가와 파장대에 따른 광 투과도, 그리고 반사도 측정을 하였으며, 전기적 특성은 면저항을 측정함으로써 분석한다. 결함이 적고, 대면적에 걸쳐 한 층을 이루어야 하는 고품질 그래핀의 요구사항에 따라 라만 분광의 G, 2D, D 띠를 분석하였다. G와 2D 띠의 비율을 통해 그래핀의 층 수를, D 띠의 강도를 통해 결함의 유무를 판단하였다. 또한, 가시광 영역에서 90% 이상의 광 투과도를 보여야 하는 투명 소자의 요구사항 달성 정도를 UV-VIS를 이용하여 확인하였다. 마지막으로, 제작한 필름의 면저항 또한 4-프로브 멀티미터를 이용하여 측정하고, 일반적인 터치스크린의 면저항인 $500{\Omega}/sq$를 만족하는지 평가하였다.

• Journal of the Korea Institute of Building Construction
• /
• v.20 no.5
• /
• pp.459-469
• /
• 2020

The purpose of this study is to secure the same or more structural performance and constructability for the detail off hooks cross-constructed at 135° used as external-ties standard detail in reinforced concrete columns, therefore, to the purpose of improving constructability, The clip-type binding implement was suggested. the experiment on the constructability evaluation and cost analysis of the clip-type binding implement by 90° end-hooked transverse reinforcement in reinforced conrete columns was carried out. The results of the analysis confirmed that standard detail column took about an one hour regardless of the diameter of tie. When using the clip-type binding implement, It was reduced to about 50% of the standard detail column. and regardless of the building size, it was most effective for the cost down when using the clip-type binding implement 1ea, it was about 32% fo labor cost reduction effect in comparison with using standard detail. as a result, Using the clip-type binding implement is shown be very effective in the working time and construction cost reduction.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.3A
• /
• pp.321-327
• /
• 2006

In this paper, when a H-polarized plane wave is incident on the grating consisting of uniform resistive strips, electromagnetic scattering is analyzed using the moment of methods (MoM). The current density of each resistive strip on a grounded dielectric plane is fixed by zero at both edges. To satisfy the condition at both ends of each resistive strip, the induced surface current density is expanded in a series of cosine and sine functions. The scattered electromagnetic fields are expanded in a series of floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for zero and several resistivities are obtained.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.6 s.121
• /
• pp.656-663
• /
• 2007

In this paper, when a E-polarized plane wave is incident on the grating consisting of tapered resistive strips, electromagnetic scattering is analyzed using the method of moments(MoM). The induced current density of each resistive strip in a grounded double dielectric layer is expected to blow up at both edges. To satisfy this, the induced surface current density is expanded in a series of Chebyshev polynomials of the second kind. The scattered electromagnetic fields are expanded in a series of Floquet mode functions. The boundary conditions are applied to obtain the unknown current coefficients. According to the variation of the involving parameters such as strip width and spacing and angle of the incident field, numerical simulations are performed by applying the Fourier-Galerkin moment method. The numerical results of the normalized reflected power for resistive strips case for several resistivities are obtained.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.1
• /
• pp.29-34
• /
• 2022

In this paper, thr H-polarized scattering problems by a resistive strip grating in a grounded double dielectric layer are analyzed by applying the PMM(point matching method) known as a numerical method of electromagnetic fileld. The boundary conditions are applied to obtain the unknown field coefficients, the scattered electromagnetic fields are expanded in a series of Floquet mode functions, and the resistive boundary condition is applied to analysis of the resistive strip. The %error of the convergence of the reflected power according to the relative permittivity of the dielectric layer and the size of the number of rows in the square matrix was compared, as the size of the number of rows in the square matrix increased, the accuracy of the reflected power increased. As the resistivity of the resistive strip decreased, the thickness of the dielectric layers decreased, and the relative permittivity of the dielectric layers increased, the reflected power increased. The numerical results for the presented structure of this paper having a grounded double dielectric layer are shown in good agreement compared to those of the existing papers.