• Journal of the Korean Chemical Society
• /
• v.26 no.6
• /
• pp.396-402
• /
• 1982

Bacteriophage T4 tRNA processing in E. coli mutant strains defective in RNase Ⅲ, RNase E$^-$, and RNase P, respectively, singly or in combinations, was investigated. In $RNase E^- strains, a RNA band, which would be referred as 9S RNA, accumulates, while in RNase$ P^-$ strains, lower band of 6S double band is accumulated. In RNase III$^-$ strains, the production of tRAN$^{Gln}$ coded by T4 tRNA gene cluster, is severely depressed and also production of species 1 RNA, which is coded by T4 DNA but not by the tRNA gene cluster, is in somewhat depressed amounts; on the other hand, at the same time, an upper band of 6S double bands, coded by T4 tRNA gene cluster, is accumulated in rather greater amounts as compared to the RNase $^+$ strain. The upper band RNA of the 6S double band, however, does not appear to be a precursor to the tRNA$^{Gln}$. The present work points to the lack of evidence for an essential cleavage role of RNase Ⅲ, although there must be a role for the RNase Ⅲ in the T4 tRNA processing.

• Journal of the Korea institute for structural maintenance and inspection
• /
• v.19 no.6
• /
• pp.1-9
• /
• 2015

Transverse steel bars are used in the plastic hinge zone of columns to insure adequate confinement, prevention of longitudinal bar buckling and ductile behavior. Fabrication and placement of rectangular hoops and cross-ties in columns are difficult to construct. Details of reinforcement for rectangular section require a lot of rectangular hoops and cross-ties. In this paper, to solve these problems, the new lateral confinement method using oblong hoop is proposed for the transverse confinement of the flared column. It can be the alternative for oblong cross-section and flared column with improved workability and cost-efficiency. The final objectives of this study are to suggest appropriate oblong hoop details and to provide quantitative reference data and tendency for seismic performance or damage assessment based on the drift levels such as residual deformation, elastic strain energy. This paper describes factors of seismic performance such as ultimate displacement/drift ratio, displacement ductility, response modification factor, equivalent viscous damping ratio and effective stiffness.

• Journal of the Korea Concrete Institute
• /
• v.15 no.3
• /
• pp.417-424
• /
• 2003

A bearing failure in RCS(Reinforced Concrete Column and Steel Beam) system is recognized as one of the distinct joint failure modes for the composite frames. Vertical and transverse reinforcement in addition to concrete are effective for better transfer of vortical forces through concrete bearing. To examine the effect of the vertical bars, tie bars, a U-type detail developed in this study and concrete confinement, local bearing tests were conducted using 22 small-scale concrete block specimens. Test results show that vertical reinforcement and tie bars mainly contribute to the bearing capacity. However larger amounts of tie reinforcement are required than those recommend from ASCE guidelines, to apply the nominal concrete strength as 2 $f_{ck}$ over the bearing area. Cross ties are proved to be highly effective for resisting the vertical forces. Maximum bearing strength can be increased upto 2.5 $f_{ck}$ . An accurate prediction model for bearing strength is proposed for better design of the composite Joint.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.510-513
• /
• 2002

띠모양의 에미터와 에미터와 정렬된 띠모양의 케이트 구멍을 가진 탄소나노튜브(CNT) 삼극 구조에 대하여 전계방출 시뮬레이션을 수행하였다. 전자방출은 주로 가장자리에서 발생하였으며 에미터와 게이트사이의 간격이 가까워지면 급격히 증가하였다. 전자방출 특성도 상당히 우수하였다. 한쪽 가장자리만을 사용한 삼극구조의 경우에는 방출된 전자의 궤적이 좁은 띠모양으로 형성되어 방향성이 매우 우수하게 나타났다. 띠모양의 에미터 및 게이트로 이어진 삼극구조는 제작이 용이하고 조립할 때 정렬이 쉬운 장점이 있다.

• The Journal of Natural Sciences
• /
• v.6 no.1
• /
• pp.79-87
• /
• 1993

In the map of period-doubling bifurcation, stable fixed points bifurcate to $2^n$ fixed points, and in the chaotic region, the chaotic bands merge to 1/$2^n$ bands. In a typical map, the chaotic bands expand to a broad chaotic band during the merging process, so called crisis. In this paper, interior crises appearing during the merging process will be discussed by using our map and will be analyzed the characteristics of the phenomenon by obtaining the Lyapunov Exponents.

• Proceedings of the Korea Institute of Convergence Signal Processing
• /
• 2003.06a
• /
• pp.288-291
• /
• 2003

본 논문에서는 모듈성과 확장성을 갖는 시스톨릭 어레이를 이용한 두 띠 행렬의 비트 연속 승산기 구현에 대하여 기술한다. 띠 폭이 3인 4$\times$4 띠 행렬이 주어질 때 워드 레블 승산기 설계를 위한 3차원 DG로부터 2차원 시스톨릭 어레이를 유도한 후, 워드 레블 PE를 비트 연속 승산기와 가산기를 이용하여 비트 레블 PE로 변환시켜 띠 행렬의 비트 레블 승산기를 설계한다. 구현된 워드 레블 승산기와 비트 레블 승산기는 RT 수준에서 VHDL로 모델링하여 동작을 검증하였다. 검증된 시스톨릭 어레이를 이용한 워드 레블 승산기와 비트 레블 승산기는 Hynix에서 제공하는 0.35$\mu\textrm{m}$ 셀 라이브러리를 사용하여 Synopsys design compiler로 합성되었다.

• Transportation Technology and Policy
• /
• v.10 no.2
• /
• pp.16-19
• /
• 2013

• Venture DIGEST
• /
• s.41
• /
• pp.6-7
• /
• 2004

원숭이는 동물 가운데 가장 영리하고 재주있는 동물이라고들 한다. 시시각각 변하는 시대의 물결을 타고 능동적이고 민첩하게 대처해야 하는 벤처인들에게 원숭이의 영특한 호기심과 분주한 활동성은 더 없이 어울린다. 2004년 갑신년 원숭이띠만 특별한 기질을 타고난 원숭이띠 벤처인들을 찾아 만나본다.

• Journal of the Korean Chemical Society
• /
• v.33 no.2
• /
• pp.156-163
• /
• 1989

The $ν_a+amide II$ combination band of thiopropionamide has been recorded for investigation of Hydrogen bonding between thiopropionamide (TPA) and N,N-dimethylalkylamide (DMF, DMA and DMP) in carbon tetrachloride over the range of $5^{\circ}$ to $55^{\circ}$. The combination band of monomeric TPA and hydrogen-bonded TPA can be resolved by Lorentzian-Gaussian product function into monomeric TPA and hydrogen-bonded TPA with amides. The association constants ($K_1$) for the hydrogen-bonded TPA were calculated by the concentrations of the monomeric TPA and the hydrogen-bonded TPA obtained from the computer resolved absorption bands. Thermodynamic parameters for the Hydrogen bonding have been evaluated by the analysis of the temperature dependent spectra. The ${\Delta}$$H^{\circ}$ of hydrogen-bonded TPA with DMF, DMA and DMP have been found to be-12.5, -13.5 and -14.1 kJ/mol, respectively. The corresponding ${\Delta}$$S^{\circ}$for the above system were -15.2, -17.9 and -22.3 J/mol${\cdot}$deg, respectively.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.6
• /
• pp.127-137
• /
• 2016

It is widely recognised that the safety-belt is one of the most important and effective vehicle safety features. Nevertheless, actual safety-belt wearing rates are low in Korea, especially rear seats. In Korea, rear seat safety-belt use can be as low as 20%. Consolidating fitment of Safety Belt Reminder(SBR) is one of means to improve belt wearing rates. In this paper, we use the effect of wearing seat belt model as Evans(1991) model. As a key parameter, intial wearing seat belt rates is studied and final wearing seat belt rates is used as scenario related a human compliance variables. In this study, benefit analysis is performed when the effective SBR is made mandatory for all passenger car seat. According to study results, when the fitment of SBR is made mandatory for all passenger car seats in Korea, 119 lives are expected to be saved annually with a 90% observance rate of the SBR. In the same condition, benefit-cost ratio will be 1.84.