• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.2625-2627
• /
• 2005

본 논문에서는 TMS320F2812 DSP를 사용하여 PFC를 위한 디지털 제어기를 설계하였다. 디지털제어기를 사용함으로써 윈도우 기반의 PC와 통신을 통해 제어기의 각종 파라미터를 모니터할 수 있고 원격제어가 가능하도록 설계하였다. 설계된 디지털 제어기는 DC 200V출력의 300W급 부스트 컨버터에 적용하였으며, 디지털 제어기를 통하여 입력전류가 입력전압의 위상을 추종제어 됨을 실험을 통하여 확인하였다.

• Journal of Broadcast Engineering
• /
• v.21 no.4
• /
• pp.592-608
• /
• 2016

Recently, many researches on digital holograms, which retain almost perfect 3 dimensional image information, have been performed actively that it seems for them to be serviced soon. Accordingly, this paper proposes a data compression technique for a digital hologram video for this service. It uses H.265/HEVC, the most recent international 2 dimensional video compression standard, for which we consider various domain transform methods to increase the correlation among the pixels in a digital hologram. Also we consider the various parameters on H.265/HEVC. The purpose of this paper is to find empirically the optimal condition for the domain transform method, the size of transform unit, and the H.265/HEVC parameters. The proposed method satisfying the optimal parameter set found is compared to the existing methods to prove that ours shows better performance.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.12 no.6
• /
• pp.500-509
• /
• 2007

In this paper, we propose a novel pc-based 8-channel USB interface digital multi-controller (DMC) has capacity to be able to adjust ultrasonic motor's (USM's) the parameters-frequency, amplitude, phase difference using FPGA. The proposed DMC can control parameters directly by digital logic through a FPGA. Since it has counter circuit for rotary encoder to measure position and velocity of USM, the other separate circuits are unnecessary. Therefore, it could reduce the size of controller and the production cost. Finally, to verify the performance of proposed DMC, we tested the speed characteristic of two types USM with no-load as adjusting the parameters.

• Proceedings of the KIPE Conference
• /
• 2001.07a
• /
• pp.422-425
• /
• 2001

권선형 유도전동기는 기동시에 충분히 큰 저항을 외부에서 삽입하여 기동전류를 작게하는 동시에 기동 토크를 크게 할 수 있다. 또한, 유도전동기의 각 기동 방식중에서 가장 우수한 시동특성을 가지고 있으며 크레인, 시멘트공장 등 중부하 시동이 요구되는 경우 널리 사용되고 있다. 권선형 유도전동기 드라이브 시스템의 전류, 토크, 위치 및 속도 등의 제어를 위하여 일반적으로 산업현장에서는 Pl 제어기가 많이 적용되고 있다. 그러나 이러한 시스템은 센서 부착시 여러가지 환경적 제약으로 인한 전체시스템의 성능 저하를 가져올 수 있어 이를 개선하기 위한 센서리스 벡터제어가 활발히 연구되고 있다. 본 논문은 권선형 유도 전동기의 센서리스 벡터제어를 위해 MRAS 기법을 적용하였고, 기존의 MRAS 기법 적용시 발생하는 파라미터 변동에 따른 속도추정오차를 개선하기 위해 센서리스 벡터제어의 속도제어에 크게 영향을 미치는 고정자 저항을 온라인으로 튜닝함으로서 파라미터 변화에 강인한 센서리스 속도제어를 구현하였다. 제안된 기법의 타당성 및 유효성을 디지털 컴퓨터에 의한 시뮬레이션에 의해 확인하였다.

• Journal of Biomedical Engineering Research
• /
• v.15 no.4
• /
• pp.419-427
• /
• 1994

A new method of digital image analysis technique for discrimination of cancer cell was presented in this paper. The object image was the Thyroid Gland cells image that was diagnosed as normal and abnormal (two types of abnormal : follicular neoplastic cell, and papillary neoplastic cell), respectively. By using the proposed region segmentation algorithm, the cells were segmented into nucleus. The 16 feature parameters were used to calculate the features of each nucleus. As a consequence of using dominant feature parameters method proposed in this paper, discrimination rate of 91.11 % was obtained for Thyroid Gland cells.

• Proceedings of the Acoustical Society of Korea Conference
• /
• spring
• /
• pp.137-140
• /
• 1999

본 논문에서는 디지털 보청기의 자동보정법을 제안하고 이를 이용하여 구현한 보정시스템에 대하여 기술한다. 일반적으로 난청환자의 청각 손실은 전 주파수를 걸쳐 일정하게 발생하는 것이 아니라, 고음 또는 저음 등 일부 특정 주파수 대역의 청각특성의 이득이 다른 주파수에 비해 상대적으로 낮아져서 생기는 현상이다. 그러나 현재까지의 보청기는 이와 같은 청각 손실을 가지고 있는 환자들에 대하여 전 주파수 대역의 음압을 동일 비율로 높여주는 문제가 있다. 이와 같은 보청기로 보정하게 되면, 주파수 대역별 균형이 맞지 않기 때문에 소리가 변형되어 들리게 되고, 명료도 또한 떨어지게 된다. 또한, 기존의 아날로그보청기는 생산공정 중에 잡음 피크 제거, 리미터 조정, 이득 조정(GC) 등의 작업을 수동으로 수행하게 되는데, 이는 작업공정이 복잡하고 개개인에 청각특성에 맞는 정확한 보정이 불가능한 문제점을 안고있다. 이와 같은 문제점을 해결하기 위하여 제안한 자동보정 시스템은 각 주파수 대역별 최적화된 파라미터를 자동적으로 찾아서 입력하므로 보다 정확하고 신속한 보정이 가능하게 된다. 이 시스템은 외부 IC 콘트를 장치인 Hl-PRO를 이용하여 PC 환경 하에서Visual Basic으로 구현하였으며 시스템의 출력값을 측정하여 검토한 결과 구현한 자동보정법이 유효함을 확인할 수 있었다.

• Korean Journal of Optics and Photonics
• /
• v.12 no.1
• /
• pp.10-16
• /
• 2001

A new digital serrodyne (DS) signal processor for the close-loop fiber optic gyroscope was designed and implemented. It is based on a new algorithm that can solve the remaining problems of the existing digital serrodyne processing by utilizing a new modulation wavefonn. The algorithm was implemented in an FPGA and tested. Theoretical limit and experimental value of the random walk were measured to be 2.6 and 3.3 deg/hr/$\sqrt{Hz}$, respectively. And drift of the processor is smaller than that by Shupe's effect.effect.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.18 no.8
• /
• pp.970-976
• /
• 2007

This paper presents a novel polar transmitter architecture with a 2-bit sigma-delta modulator. In the proposed architecture, the 2-bit sigma-delta modulator is introduced to suppress quantization noise of conventional sigma-delta modulator. The power amplifier configuration is also modified in a binary form to accommodate the 2-bit digitized envelope signal. The Ptolemy simulation results of the proposed structure show that the spectral property is greatly improved in full transmit band of EDGE system. The fine quantization scheme of the 2-bit modulator lowers the noise level by 10dB without increasing the over-sampling ratio, which may be obtained if the over-sampling ratio increases twofold. Dynamic range is also enhanced up to 5dB owing to the new form of the power amplifier in the transmitter.

• Journal of Digital Convergence
• /
• v.14 no.9
• /
• pp.553-561
• /
• 2016

The purpose of this study was to compare cardiopulmonary function, RPE(Rating of perceived exertion), and blood lactate when examining the GXT(Graded exercise testing) of wheelchair treadmill and arm ergometer. Participants were 11 wheelchair basketball players with non disability. While examining the GXT of wheelchair treadmill and arm ergometer, cardiorespiratory functional capacity was measured by using $Quarkb^2$ and Polar and RPE was measured through Borg Scale. The lactate analyser, YSI-2000 was used to measure blood lactate level when resting, right after exercise, two minutes, four minutes, six minutes, and ten minutes of recovery. Data was analyzed by paired t-test using SPSS 18.0 program and significance for all statistical analysis was fixed at .05 confidence level(p<0.05). The conclusion of this study is below. First, maximal oxygen uptake which is a factor of cardiopulmonary function showed the highest with arm ergometer, the rate of respiratory exchange showed the highest with wheelchair treadmill, and maximal heart rate showed the highest with wheelchair treadmill. Second, subjective exercise intensity showed the highest with arm ergometer at the end point. Third, blood lactate level showed the highest with arm ergometer right after exercise.

• Proceedings of the Korean Association of Geographic Inforamtion Studies Conference
• /
• 2010.06a
• /
• pp.137-144
• /
• 2010

Ground digital image data obtained by using DSLR camera can be used to the ground photogrammetry and spatial modeling. Intensity of each pixel in digital video images is the most important parameter to generate digital image. Therefore, it is needed to estimate the parameters and spectral characteristics of digital cameras in order to take more definite intensity data. In this study, using the Sony DSC-F828 DSLR camera, seven digital images are obtained by the continuous shooting. (frame rate, 0.38 seconds). And then extract the value of the intensity from RGB band of each digital color photographs to confirm difference of intensity between frames. The purpose of this study is to confirm spectral characteristics and changes and to estimate correlation through the analysis of statistical in each pixel of R, G, B band.