• Title/Summary/Keyword: 디지털 논리회로

Search Result 92, Processing Time 0.028 seconds

Implementation of a Web-based Virtual Laboratory System for Digital Logic Circuits Using Online Schematic Mapping (온라인 설계 맵핑을 이용한 웹 기반 디지털 논리 회로 가상 실험 시스템의 구현)

  • Kim Dong-Sik;Seo Sam-Jun
    • Journal of Institute of Control, Robotics and Systems
    • /
    • v.11 no.6
    • /
    • pp.558-563
    • /
    • 2005
  • In this paper, we implemented a web-based virtual laboratory system(VLab system) with creative and interactive multimedia contents, which can be used to enhance the quality of education in the area of digital logic circuits. Since the proposed VLab system is implemented to describe the on-campus laboratory, the learners can obtain similar experimental data through it. Also, the VLab system is designed to increase the learning and teaching efficiencies of both the learners and the educators, respectively. The learners will be able to achieve high teaming standard and the educators save their time and labor. The virtual experiments on our VLab system are performed according to the following procedure: (1) Circuit composition on the virtual bread board (2). Applying input voltage (3) Output measurements (4) Checkout of experiment results. Furthermore, the circuit composition on the virtual bread board and its corresponding online schematic diagram are displayed together on the VLab system for the learner's convenience. Finally, we have obtained several affirmative effects such as reducing the total experimental hours and the damage rate for experimental equipments and increasing learning efficiencies as well as faculty productivity.

Construction of the Multiple Processing Unit by De Bruijn Graph (De Bruijn 그래프에 의한 다중처리기 구성)

  • Park, Chun-Myoung
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.10 no.12
    • /
    • pp.2187-2192
    • /
    • 2006
  • This paper presents a method of constructing the universal multiple processing element unit(UMPEU) by De Bruijn Graph. The second method is as following. First, we propose transformation operators in order to construct the De Bruijn UMPEU using properties of graph. Second, we construct the transformation table of De Bruijn graph using above transformation operators. Finally we construct the De Bruijn graph using transformation table. The proposed UMPEU be able to construct the De Bruijn graph for any prime number and integer value of finite fields. Also the UMPEU is applied to fault-tolerant computing system, pipeline class. parallel processing network, switching function and its circuits.

Jeju Jong Nang Channel Code I (제주 정낭 채널 Code I)

  • Lee, Moon Ho
    • Journal of the Institute of Electronics and Information Engineers
    • /
    • v.49 no.12
    • /
    • pp.27-35
    • /
    • 2012
  • In this paper, we look into a Jong Nang Channel which is the origin of digital communications and has been used in Jeju Island since AD 1234. It is one kind of communication ways which informs people of whether a house owner is in one's house or not using its own protocol. It is comprised of three timber and two stone pillars whose one side has three holes respectively. In this paper, we analyze the Jong-Nang Channel both in the light of logic and bit error probability. In addition, we compare it with a conventional binary erasure channel when some errors occur over them respectively. We also show that a capacity of NOR channel approaches Shannon limit.

Generation of Video Clips Utilizing Shot Boundary Detection (샷 경계 검출을 이용한 영상 클립 생성)

  • Kim, Hyeok-Man;Cho, Seong-Kil
    • Journal of KIISE:Computing Practices and Letters
    • /
    • v.7 no.6
    • /
    • pp.582-592
    • /
    • 2001
  • Video indexing plays an important role in the applications such as digital video libraries or web VOD which archive large volume of digital videos. Video indexing is usually based on video segmentation. In this paper, we propose a software tool called V2Web Studio which can generate video clips utilizing shot boundary detection algorithm. With the V2Web Studio, the process of clip generation consists of the following four steps: 1) Automatic detection of shot boundaries by parsing the video, 2) Elimination of errors by manually verifying the results of the detection, 3) Building a modeling structure of logical hierarchy using the verified shots, and 4) Generating multiple video clips corresponding to each logically modeled segment. The aforementioned steps are performed by shot detector, shot verifier, video modeler and clip generator in the V2Web Studio respectively.

  • PDF

Low-power Horizontal DA Filter Structure Using Radix-16 Modified Booth Algorithm (Radix-16 Modified Booth 알고리즘을 이용한 저전력 Horizontal DA 필터 구조)

  • Shin, Ji-Hye;Jang, Young-Beom
    • Journal of the Institute of Electronics Engineers of Korea TC
    • /
    • v.47 no.12
    • /
    • pp.31-38
    • /
    • 2010
  • In tins paper, a new DA(Distributed Arithmetic) tilter implementation technique has been proposed. Contrary to vertical directional calculation of input sample bit format in the conventional DA implementation technique, proposed implementation technique utilizes horizontal directional calculation of input sample bit format. Since proposed technique calculates in horizontal direction, it does not need ROM and utilizes the Modified Booth algorithm. Furthermore proposed technique can be applied to implement the variable coefficients filters in addition to the fixed coefficients filters. Using conventional and proposed techniques, a 20 tap filter is implemented by Verilog-HDL coding. Through Synopsis synthesis tool, it has been shown that 41.6% area reduction can be achieved.

The Development of High Resolution Film Scanner Using DSP (DSP를 이용한 고해상도 스캐너 개발)

  • 김태현;최은석;백중환
    • Proceedings of the Korea Institute of Convergence Signal Processing
    • /
    • 2000.12a
    • /
    • pp.149-152
    • /
    • 2000
  • A scanner is an output device that scans documents, photographs, films etc, and convert them to digital data. Especially, a film scanner is used for scanning negative/positive films. In this paper, we design step motor control part, image sensor part, and Aか converter part which are components of the scanner and use DSP for fast signal processing. We also design the interface circuits using EPLD between these peripherals and DSP. The PC interface circuits between scanner and PC are designed by using parallel port to control and transfer the scanned data from scanner to PC. For 35mm film, we design hardwares which obtain high resolution more than 9 million pixels (horizontal resolution is 3835 and vertical resolution is 2592).

  • PDF

An Efficient Encryption Scheme Combining PRNG and Permutation for Mobile Multimedia Data (모바일 멀티미디어 데이타를 위한, 의사난수생성기와 순열 기법을 결합한 효율적인 암호화 기법)

  • Han, Jung-Kyu;Cho, Yoo-Kun
    • Journal of KIISE:Computer Systems and Theory
    • /
    • v.34 no.11
    • /
    • pp.581-588
    • /
    • 2007
  • In Digital Right Management, symmetric cipher is used for content encryption to reduce encryption cost, AES, advanced encryption standard is usually used to multimedia encryption under desktop environment because of its reasonable security level and computation cost. But mobile handheld device often uses slow speed processor and operates under battery-powered environment. Therefore it requires low computation cost and low energy consumption. This paper proposes new stream cipher scheme which combines pseudo random number generator(PRNG) and dynamically generated permutations. Proposed scheme activates PRNG and generates original key streams. Then it generates extended key streams by applying permutation to original sequence. These extended key streams are XORed with plaintext and generate ciphertext. Proposed scheme reduces the usage of PRNG. Therefore this scheme is fast and consumes less energy in comparison with normal stream cipher. Especially, this scheme shows great speed up (almost 2 times) than normal stream cipher scheme in random access.

A VLSI Pulse-mode Digital Multilayer Neural Network for Pattern Classification : Architecture and Computational Behaviors (패턴인식용 VLSI 펄스형 디지탈 다계층 신경망의 구조및 동작 특성)

  • Kim, Young-Chul;Lee, Gyu-Sang
    • Journal of the Korean Institute of Telematics and Electronics B
    • /
    • v.33B no.1
    • /
    • pp.144-152
    • /
    • 1996
  • In this paper, a pulse-mode digital multilayer neural network with a massively parallel yet compact and flexible network architecture is presented. Algebraicneural operations are replaced by stochastic processes using pseudo-random pulse sequences and simple logic gates are used as basic computing elements. The distributions of the results from the stochastic processes are approximated using the hypergeometric distribution. A statistical model of the noise(error) is developed to estimate the relative accuracy associated with stochastic computing in terms of mean and variance. Numerical character recognition problems are applied to the network to evaluate the network performance and to justify the validity of analytic results based on the developed statistical model. The network architectures are modeled in VHDL using the mixed descriptions of gate-level and register transfer level (RTL). Experiments show that the statistical model successfully predicts the accuracy of the operations performed in the network and that the character classification rate of the network is competitive to that of ordinary Back-Propagation networks.

  • PDF

Realization of Intelligence Controller Using Genetic Algorithm.Neural Network.Fuzzy Logic (유전알고리즘.신경회로망.퍼지논리가 결합된 지능제어기의 구현)

  • Lee Sang-Boo;Kim Hyung-Soo
    • Journal of Digital Contents Society
    • /
    • v.2 no.1
    • /
    • pp.51-61
    • /
    • 2001
  • The FLC(Fuzzy Logic Controller) is stronger to the disturbance and has the excellent characteristic to the overshoot of the initialized value than the classical controller, and also can carry out the proper control being out of all relation to the mathematical model and parameter value of the system. But it has the restriction which can't adopt the environment changes of the control system because of generating the fuzzy control rule through an expert's experience and the fixed value of the once determined control rule, and also can't converge correctly to the desired value because of haying the minute error of the controller output value. Now there are many suggested methods to eliminate the minute error, we also suggest the GA-FNNIC(Genetic Algorithm Fuzzy Neural Network Intelligence Controller) combined FLC with NN(Neural Network) and GA(Genetic Algorithm). In this paper, we compare the suggested GA-FNNIC with FLC and analyze the output characteristics, convergence speed, overshoot and rising time. Finally we show that the GA-FNNIC converge correctly to the desirable value without any error.

  • PDF

Systematic Generation of PLC-based Design from Formal Software Requirements (정형 소프트웨어 요구사항으로부터 PLC 디자인의 체계적 생성)

  • Yoo Junbeom;Cha Sungdeok;Kim Chang Hui;Song Deokyong
    • Journal of KIISE:Software and Applications
    • /
    • v.32 no.2
    • /
    • pp.108-118
    • /
    • 2005
  • The software of the nuclear power plant digital control system is a safety-critical system where many techniques must be applied to it in order to preserve safety in the whole system. Formal specifications especially allow the system to be clearly and completely specified in the early requirements specification phase, therefore making it a trusted method for increasing safety. In this paper, we discuss a systematic method, which generates PLC-based FBD programs from the requirements specification using NuSCR, a formal requirements specification method. This FBD programs takes an important position in design specification. The proposed method can reduce the possible errors occur in the manual design specification, and the software development cost and time. To investigate the usefulness of our proposed method, we introduce the fixed set-point rising trip example, a trip logic of BP in DPPS RPS, which is presently being developed at KNICS.