• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2007년도 추계학술대회 논문집
• /
• pp.67-70
• /
• 2007

Diesel autothermal reforming has several problems such as carbon deposition in reforming reactor, sulfur poisoning of catalyst, difficulty of aromatics decomposition and mixing problems of reactants(diesel, steam, oxygen). Severe carbon deposition causes the rapid performance degradation of reformer. Carbon deposition is formed from ethylene, carbon precursor. Ethylene was generated at the homogeneous reaction zone of the reactor entrance. This phenomenon is closely linked to the mixing of reactants. In this investigation, we try to minimize the ethylene generation at the reactor entrance atomization technique.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2009년도 춘계학술대회 논문집
• /
• pp.773-776
• /
• 2009

In this paper, new concept of the diesel fuel processing is introduced for the stable operation of solid oxide fuel cells (SOFCs). Heavier hydrocarbons than $CH_4$, such as ethylene, ethane, propane, and etc., induce the carbon deposition on anode of SOFCs. In the reformate of heavy hydrocarbons (diesel, gasoline, kerosene, and JP-8), concentration of ethylene is usually higher than low hydrocarbons such as ethane, propane, and butane. So, removal of low hydrocarbons (over C1-hydrocarbons), especially ethylene, at the reformate gases is important for stable operation of SOFCs. New methodology as named "post-reformer" is introduced for removing the low hydrocarbons at the reformate gas stream. Catalyst of the NECS-PR4 is selected for post-reforming catalyst because the catalyst of NECS-PR4 shows the high selectivity for removing low hydrocarbons and achieving the high reforming efficiency. The diesel reformer and post-reformer are continuously operated for about 200 hours as integrated mode. The reforming performance is not degraded and low hydrocarbons in the diesel reformate are completely removed.

• 에너지공학
• /
• 제13권4호
• /
• pp.235-241
• /
• 2004

본 연구는 초음파 개질 바이오 디젤유의 점도와 표면장력에 대한 연료의 물리적 특성, 분무 미립화 특성에 관한 심층적이고 체계적인 연구에 중점을 두었다. 이를 규명하기 위하여 초음파 재질 연료와 개질 되지 않은 연료의 상대 비교 분석을 통한 연료특성과 연료분사펌프의 회전수 및 노즐선단 거리변화에 의한 입경측정의 상관성을 정립하였다.

• 대한기계학회논문집B
• /
• 제34권7호
• /
• pp.689-696
• /
• 2010

디젤엔진은 높은 열효율과 우수한 연비 성능 등의 장점을 가지고 있으나, 기화된 연료와 주변 공기가 혼합된 후 착화되는 과정을 거치기 때문에 이론 공연비 영역에서는 질소산화물(NOx) 배출이 증가되는 문제점을 가지고 있다. 최근 활발히 연구되고 있는 높은 정화 효율을 가진 LNT 촉매는 희박 분위기 조건에서는 NOx를 흡장하게 되고 과농한 분위기에서는 환원 분위기 형성을 통하여 NOx를 저감시키게 된다. 희박 공연비에서 동작하는 디젤 엔진에서는 이러한 환원 과정을 이루기 위해 주기적으로 과농한 분위기를 형성해주어야만 하는데, 이러한 연구는 NOx 저감을 위해 HC를 포함한 환원제의 농도를 제어하는 기술로서 본 연구에서는 디젤을 연료로 하는 수소농후가스 발생장치를 이용하여 LNT 촉매에 환원제로서 수소농후가스를 직접 공급하는 방식으로 LNT 촉매의 NOx 저감 특성을 파악하였다.

• 한국수소및신에너지학회논문집
• /
• 제12권4호
• /
• pp.293-305
• /
• 2001

최근 디젤 대체 연료 및 발전용 연료로서 그 가능성을 인정받고 있는 DME(dimethyl ether, $CH_{3}OCH_{3}$)를 이용하여 수소를 생산하는 방법으로 DME 수증기 개질반응의 기초 실험을 수행하였다. DME 개질 반응의 생성물의 평형 조성 분포를 온도, 압력, 원료의 공급비$(H_{2}O/DME)$를 변수로 하여 열역학적으로 해석하였고, DME, 에탄올, 또는 메탄올 수증기 개질 반응의 생성물의 분포를 비교하여 수소 생산을 위한 공급원료로의 가능성을 검토하였다. 여러 종류의 개질 촉매를 사용하여 DME 개질 반응을 수행해 본 결과, 반응온도 $300^{\circ}C$, 반응압력 1atm, 원료 공급비$(H_{2}O/DME)=3$인 반응조건에서 1.0wt% $Pd/{\gamma}$-alumina가 가장 좋은 활성 및 60% 이상의 수소 선택도를 보여주었으, 또한 원료의 공급비가 증가함에 따라 DME의 전환율 및 주 생성물인 수소의 수율이 현저하게 증가함을 보여주었다.

• 한국자동차공학회논문집
• /
• 제14권1호
• /
• pp.109-114
• /
• 2006

The reformed bio-diesel fuel irradiated by the ultrasonic wave is applied to the diesel engine of common rail in common use recently. This study has the object to examine the properties of engine performance and discharged materials. The bio-diesel fuel is mixed and used with the diesel fuel in common use at the ratio of $20\%\;or\; 100\%$. The ultrasonic energy is irradiated to the individually mixed fuel in order to reform the fuel. This fuel is applied to the engine in this experiment. And It is compared and analyzed from the experimental results with two cases irradiating the ultrasonic wave and no irradiating.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2005년도 창립60주년 기념 추계 학술대회
• /
• pp.15.2-15.2
• /
• 2005

• 한국분무공학회지
• /
• 제12권3호
• /
• pp.131-137
• /
• 2007

This is an experimental study on characteristics of engine performance and discharged materials in common-rail type diesel engine. The bio-diesel fuel is mixed with the diesel fuel in common use at the ratio of 20% or 100%. The diesel fuel and blended fuel is irradiated by ultrasonic wave energy. The diese1 fuel, blended fuel, reformed diesel fuel and reformed blended fuel by ultrasonic wave energy are applied to the experimental engine individually. The results are compared with one of the diesel fuel in common use and analyzed.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.115.2-115.2
• /
• 2010

Autothermal reforming(ATR) processes of hydrocarbon liquids such as diesel fuels are spotlighted as methods to produce hydrogen for Fuel cell. However, the use of heavy hydrocarbons as feedstocks for hydrogen production causes some problems which increase the catalyst deactivation by the carbon deposition. Coking can be inhibited by increasing the water dissociation on the catalyst surface. This results in catastrophic failure of whole system. Performance degradation of diesel autothermal reforming leads to increase of undesirable hydrocarbons at reformed gases and subsequently decrease the performance. In this study, perovskite-based catalysts were investigated as alternatives to substitute the noble metal catalyst for the ATR of diesel. The investigated perovskite structure was based on LaCrO3. and metals were added at the A-site to enhance oxygen ion mobility, transition metals were doped on the B-site to enhance the reformation. Substituted Lanthanum chromium perovskite were made by aqueous combustion synthesis, which can produce high surface area. And for the homogeneous fuel supply, we made ultrasonic injection system for reforming. We compared durability of evaporation system and ultrasonic system for fuel injection.

• 한국신재생에너지학회:학술대회논문집
• /
• 한국신재생에너지학회 2010년도 추계학술대회 초록집
• /
• pp.78.1-78.1
• /
• 2010

The metal-supported solid oxide fuel cell (SOFC) was studied. Hydrocarbon fueled operation is necessary to make SOFC system. Different operating characteristics for metal-supported SOFC are used than for conventional ones as hydrocarbon fueled operation. Metal-supported SOFC was successfully fabricated by a high temperature sinter-joining method and the cathode was in-situ sintered. Synthetic gas, which is compounded as the diesel reformate gas composition and low hydrocarbons was completely removed by the diesel reformer. Metal-supported SOFC with synthetic gas was operated and evaluated and its characteristics analyzed. Button cell and $5{\times}5cm^2$ single stack were mainly operated and analyzed. Long-term operation using diesel reformate shows degradation, and degradation analysis was completed in the view of metal oxidation. Solution to increase stability of long-term operation was tried in the way of materials and operating conditions. Finally, $5{\times}5cm^2$ metal-supported single stack using synthetic gas was operated for 1000 hours under the modified condition.