• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.4
• /
• pp.12-18
• /
• 1995

To improve the performance of diesel automobile engine, we designed new fuel supply system named ultrasonic fuel supply system. The performance test of diesel automobile engine carried out to examine possibility of practical use of ultrasonic fuel supply system to test engine. This paper deals with the comparative results of performance test of diesel automobile engine in terms of smoke, HC, SFC, PS, thermal, efficiency, torque. Following are obtained result. 1) In naturally aspirated diesel engine, when we use ultrasonic fuel supply system output, fuel consumptions are improved and exhaust gas reduced significantly. 2) In turbo-charging diesel engine both using of ultrasonic fuel supply system and using of conventional injector, engine performance and exhaust gas temperature are almost constant. 3) In turbo-charging diesel engine, when we use ultrasonic fuel supply system, NOx are emitted approximately 3.5% higher than total average. 4) In turbo-charging diesel engine, when we use ultrasonic fuel supply system, smoke and CO are 17% and 11.8% improved respectively.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.18 no.3
• /
• pp.143-148
• /
• 2010

In this study, the potential possibility of biodiesel fuel(BDF) and oxygenated fuel(ethylene glycolvmono-n-butyl ether; EGBE) was investigated as an effective method of decreasing the smoke emission. The smoke emission of blending fuel (BDF and EGBE 0~20 vol-%) was reduced in comparison with diesel fuel and it was reduced approximately 64% at 2000 rpm, full load in the 20% of blending rate. But torque and brake specific energy consumption( BSEC) didn't have no large differences. Also, the effects of exhaust gas recirculation(EGR) for the reduction of NOx emission has been investigated. Consequently, It was found that simultaneous reduction of smoke and NOx emission was achieved with BDF(90 vol-%) and EGBE(10 vol-%) blended fuel and cooled EGR method(5~10%).

• Journal of Power System Engineering
• /
• v.15 no.3
• /
• pp.5-11
• /
• 2011

디젤기관의 경우는 종래부터 직분식이 주류를 이루었고, 근래에는 분사압력의 고압화가 진행중이다. 분사압력의 고압화에 의해 연소효율의 향상 및 배출가스중의 입자상물질(PM:Particulate Matter)의 저감을 유도하고 있으나, 연소가스의 고온화로 인해 질소산화물(NOx:Nitrogen Oxides)은 증가한다. 따라서, 분사기간의 지연(Retard)이나 파일럿분사(Pilot injection)등의 혼합기제어에 의해 질소산화물의 저감을 꾀하고 있다. 이와 같이 디젤기관에 있어서도 혼합기 형성의 최적화에 의한 연소제어를 시도하는 수법이 중시되고 있고, 이를 위해서는 디젤분무 구조에 기초한 혼합기의 형성기구에 대한 규명이 매우 중요하다. 그러므로 본 연구에서는 보다 고도의 혼합기형성 제어를 위한 기초연구로서 고온 고압장에서의 증발디젤자유분무구조를 해석하였으며, 계측영역은 연료와 주위기체와의 혼합이 활발히 진행되는 분무의 하류영역으로 설정하고, 입자화상속도측정법(particle Image Velocimetry:PIV)을 이용한 분무의 유동해석을 기초로 증발 디젤분무의 구조 해석을 행하였다. 실험조건으로서 분사압력을 72MPa, 112MPa로 각각 변화시켰다.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.110.1-110.1
• /
• 2011

최근 식물성 기름으로부터 생산된 바이오디젤의 보급이 활발해지면서, 그 원료의 안정적 확보에 대한 어려움과 원료가격 상승의 문제점이 발생하고 있다. 이러한 문제점을 극복하기 위한 대안으로 다양한 종류의 기름이 검토되고 있으며, 그 중 하나가 축산 폐유지를 이용한 바이오디젤의 생산이다. 그러나 축산 폐유지로부터 생산된 바이오디젤은 저온유동성이 열악하여 개선이 필요하다. 축산 폐유지 바이오디젤의 저온필터막힘점은 $6{\sim}8^{\circ}C$로 국내 동절기 품질 기준 $0^{\circ}C$ 이하를 만족하지 못한다. 본 연구에서는 축산 폐유지로부터 생산된 바이오디젤의 열악한 저온특성을 개선하기 위해 저온필터막힘점 개선 첨가제 6종을 사용하여 각각의 첨가제 혼합에 의한 저온유동성 개선 효과를 분석하였다. 각각의 첨가제를 1,000 ~ 5,000ppm 범위에서 폐돈지 및 폐우지 바이오디젤에 첨가하였다. 그 결과, Wintron을 제외한 나머지 첨가제는 폐돈지 바이오디젤의 저온필터막힘점을 최저 $0^{\circ}C$까지 개선할 수 있었다. 하지만 폐우지 바이오디젤의 경우, 첨가제에 의한 저온유동성 개선의 효과는 매우 적었다.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.701-714
• /
• 2013

Recently, due to the activation policy of biodiesel, the blending biodiesel to petroleum product is increasing. Low-temperature fluidity and oxidation stability are the most significant issues to the marketers and end users of biodiesel. Thus, the way to control the quality of biodiesel blended fuels was investigated by duplicating the real storage situation of biodiesel blended fuels and evaluating the effect of oxidation trend and quality degradation. From the results of oxidation degradation test of biodiesel blended fuels, no special quality degradation has been observed through the evaporation for 18 weeks in a summer season under a storage circumstance without exposure to the sun light. However, the severe quality degradation was observed in PE vessel in only 2 weeks of storage. This oxidation degradation was also verified with FT-IR spectrum change. However, the special symptom cannot be distinguished by the quality test because the quality specifications were satisfied despite of the drastic oxidation degradation. Namely, the problem in a vehicle could be occurred by oxidation materials(polymer, organic acid. etc.) under oxidation even though it satisfied the quality specification.

• Journal of the Korean Applied Science and Technology
• /
• v.32 no.4
• /
• pp.767-780
• /
• 2015

Transport biofuels produced from biomass can be substituted for petroleum fuels due to GHG reduction, sustainability and environmental friendly. Mandates and targets of biofuels are announced in the European union, United states and other countries worldwide and promoted by the government policies. This paper reviewed current status of the national biofuels policies and fuel specifications in transport sector. EU biofuels policy shifted and GHG emission reduction became the main focus of the policy. There are specification requirements for biofuels in the U.S. under the RFS2, but there are other polices as well that serve to promote the uptake of biofuels both at the federal and state level. Korea government has allowed 2.3% oxygen in gasoline to come from oxygenates, increased the biodiesel blend mandate from B2 to B2.5 effective from Jul. 31, 2015.

• Journal of the Korean Applied Science and Technology
• /
• v.30 no.4
• /
• pp.688-700
• /
• 2013

The potential of biodiesel production technology using lipids extracted from sewage sludge was investigated. Despite the bright prospect of biodiesel production, efforts to commercialize it have been very limited. One of the major obstacles has been the high price associated with refined oil feedstock, which makes up nearly 70-75% of the total production costs. Hence, in order to reduce the cost of biodiesel production, using cheaper feedstock such as waste oil or low-quality oil has been proposed. Especially, sewage sludge, a relatively inexpensive feedstock, is a promising raw material for such a purpose. In this study, it is aimed to review biodiesel production technology from sewage sludge as a lipid feedstock. It is process modifications to combine the oil extraction steps, fuel conversion steps (i.e. in situ transesterification, thermo-chemical process with non-catalytic heterogeneous biodiesel production) and fuel quality from sewage sludge.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.35 no.9
• /
• pp.869-874
• /
• 2011

In a CNG/diesel dual-fuel engine, CNG is used as the main fuel and a small amount of diesel is injected into the cylinder to provide ignition priming. In this study, a remodeling of the existing diesel engine into a CNG/diesel dual-fuel engine is proposed. In this engine, diesel is injected at a high pressure by common rail direct injection (CRDI) and CNG is injected at the intake port for premixing. The CNG/diesel dual-fuel engine had an equally satisfactory coordinate torque and power as the conventional diesel engine. Moreover, the CNG alternation rate is over 89% throughout the operating range of the CNG/diesel dual-fuel engine. PM emission by the dual-fuel engine is 94% lower than that by the diesel engine; however, NOx emission by the dual-fuel engine is higher than that by the diesel engine.

• Journal of the Korean Electrochemical Society
• /
• v.8 no.1
• /
• pp.12-16
• /
• 2005

Diesel is one of the best hydrogen systems, which has very high volumetric density $[kg\;H_2/m^3]\;(>100)\;and\;gravimetric\;density[\%\;H_2]\;(>\;15)$Several catalysts were selected for diesel reforming. 3 catalysts of our group (NECS-1, NECS-2, NECS-3) and 2 commercial catalysts (Sud-Chemie, Inc, FCR-HCl4, FCR-HC35) were used to reform diesel. NECS-1 showed the best performance to reform diesel. In addition to these results, we studied on reaction characteristics for better understanding about auto thermal reforming of diesel by investigating product gas concentrations and temperature Profiles along the catalyst bed. We found technological issues such as fuel delivery and thermal configuration between front exothermic part and rear endothermic part.

• Journal of Advanced Marine Engineering and Technology
• /
• v.37 no.8
• /
• pp.849-854
• /
• 2013

Many researches on green ship with increasing on economics, efficiency and convenience have been carried out consistently. One of them is development of diesel engines with electronic control. While small duty one for automobiles had been adopted mainly already, disseminating heavy duty one for ships has trouble due to safety and reliability. In order to solve these problem in this study, performance of electronic control and cam type engine installed in parallel on training ship HANBADA of korea maritime university was analyzed and compared. It is certain that specific fuel oil consumption of the electronic control type is lower than cam type and excellent at lower engine load, especially. And the electronic control type shows more effective characteristic at sea trial on specific fuel oil consumption.