• Transactions of the Korean Society of Mechanical Engineers
• /
• v.10 no.3
• /
• pp.305-315
• /
• 1986

Redesign of the mounting system to minimize vibration of a variable displacement engine through computer simulation is considered. A three degree of freedom model is established for an in-line four-cylinder automobile engine with a three point mounting system. The engine mount locations and angles, and isolator sizes are chosen as design parameters. Constraints on isolator deformations and design parameters are imposed. The gradient projection method is utilized for optimization. Simulation studies show significant vibration reduction can be obtained especially at idling speed.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.8 no.1
• /
• pp.71-78
• /
• 1984

본 논문은 왕복동 내연기관의 방열에 관한 연구의 하나로서 디이젤 기관 실린더 헤드와 흡 배기 밸브의 온도 분포와 열유속의 분포를 구한 것이다. 방열 해석은 기관의 정상 작동된 다음의 실린 더 헤드의 열부하가 일정하다고 생각하여 실린더 헤드의 밸드 시이트 양단의 온도와 연소 가스 배출 온도, 흡기 및 냉각수 온도를 측정하고 온도분포 및 열유속을 유한요소법을 적용하여 구하 였다. 본 연구의 결과 실린더 헤드 및 밸브의 과부하는 밸브의 경우에는 밸브 헤드 중심과 밸브 헤드 중심 부근에서 일어나며, 실린더 헤드의 경우에는 헤드 중심부 표면에서 발생하였다. 흡 배 기 밸브 및 물재킷부의 온도 분포 및 열유속의 분포를 주어진 냉각수 온도 조건에 대하여 구한 후 이들을 비교 검토 하였다.

• 한국생물공학회:학술대회논문집
• /
• 2000.04a
• /
• pp.424-425
• /
• 2000

The effects of the presence of commercial non-ionic surfactants on the cell growth and diesel degradation by Pseudomonas sp. OSD were studied. Most surfactants inhibited the diesel biodegradation at high concentration(1000mg/1). However, some surfactants showed no inhibition at lower concentrations. Tween 20, Brij 58, Brij 78 were not inhibitory to the diesel biodegradation even at high concentration. These chosen surfactants has relatively high HLB values. There exists complicated relationship for diesel bioremediation between cell hydrophobicity, surfactant HLB, contaminants, an soil.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.6
• /
• pp.963-970
• /
• 1987

It has been a long time that black smoke emitted from buses and trucks powered with diesel engines, especially city-buses, came to be a serious air pollution problems in large cities as Seoul and Pusan. Therefore, proper means to reduce black smoke from diesel engines have to be considered as soon as possible, because it will take quite a long time to replace major passenger transportation system in cites from city-buses to subway. This paper, as a study on the reduction of diesel black smoke, showes how the black smoke of diesel engines can be reduced at various loads and engine speed by supplying small amount of gaseous fuel as LPG into the intake manifold. Thermal efficiency has been also considered for users, and confirmed through the engine test.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2000.11a
• /
• pp.401-406
• /
• 2000

Spilling of petroleum hydrocarbons such as gasoline, motor oils, and diesel fuel from underground storage tanks (USTs) is a major source of contamination to ground water and soils. In response to the need of developing an effective and economical cleanup technique, this study investigates the effectiveness of using sonication to enhance the soil flushing method. The study involves laboratory testing, and the testing was conducted using a specially designed and fabricated device to determine the effect of sonication on contaminant removal. The sonication was applied at 20 kHz frequency under different power levels. Test soil was Joomoonjin Sand, and diesel fuel was used as a contaminant of soil flushing test. The results of the investigation show that sonication enhanced the contaminant removal from soils significantly, and the degree of enhancement varied with power levels of sonication. Based on the results of the study, it is concluded that the flushing method with sonication has a great potential to become an effective method for removing petroleum hydrocarbons from the contaminated ground.

• Journal of the korean Society of Automotive Engineers
• /
• v.6 no.4
• /
• pp.12-17
• /
• 1984

인류문명의 발달과 더불어 자동차는 우리의 일상생활에서 가장 긴요한 문명의 이기로서 교통 및 수송수단의 대부분을 차지하고 있음은 주지의 사실이다. 좀더 편리하고 이상적인 자동차를 지 향하려는 인간의 의지는 자동차의 기관을 비롯하여 각종장치의 구조 및 작동성능을 최적화하는데 크게 이바지하여 왔으며, 이러한 노력은 자동차용 기관의 효율증대와 배기저감 등에 많은 발 전을 가져오게 되었다. 특히 에너지타동이후 우리나라를 비롯한 세계여러나라는 자원의 소비절 약을 극대화하려는 방향으로 많은 연구가 이루어지고 있다. 자동차용 연소기관의 성능은 초기 에는 주로 출력성능에 주안을 두어 설계하여 왔으나 점차 배기에 의한 대기오염문제가 제기됨에 따라 배기가스의 유해성분저감, 소음저감, 내구성 증대를 비롯하여 연료소비절감을 감안한 경 제성을 감안하여 설계하게 되었으며 최근에는 이들을 충족시키면서도 최적제어시스템을 갖는 자동차로 발전하게 되었다. 자동차용 연소기관의 주류는 지금까지 사용하여 오고 있는 가솔린 기관, 디이젤기관이며 이 외에도 가스 터빈, 전기자동차용기관, 등이 일부 사용되고 있다. 이 러한 관점에서 여기서는 주로 자동차용 가솔린기관과 디이젤기관의 진전과 최근의 동향에 대하여 개괄적으로 고찰하여 보기로 한다.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.3 no.5
• /
• pp.10-16
• /
• 1995

In this study, the optimum design is carried out upon the crankshaft of in-line 6-cylinder internal combustion diesel engine with the mechanical analysis for the layout design, which is standard calculation whose process contains quadratic curve fitting method and quasi newton method about cost function, design variables and constraint conditions, Without finite element analysis, this process in wich mechanical analysis is performed upon the most critical part in crankshaft gives necessary and satisfied output in layout design and saves time and cost in developing a new diesel engine. In this study, also, the 3-dimensional finite element method is used in confirming the standard calculation for the optimization of crankshaft and the shape optimization in crankweb is obtained.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.12 no.3
• /
• pp.534-540
• /
• 1988

A study on the mixing process of fuel with ambient gas is necessary to verify combustion process of a diesel engine, especially the mechanism of its ignition delay. In this study, a single shot of diesel spray was injected through either a constant pressure injection system and bypass type injection system. Measurements were made on the flow characteristics of ambient gas and its time history using a hot wire anemometer and a high speed camera. The gas flow direction was determined by a smoke tracer method. (1) The ambient gas of spray flows away at the stagnation part where static pressure value is positive and flows in at the penetration part of a negative value with the steady entrainment length of 0.7. (2) The steady entertainment velocity around the spray in creases from the nozzle tip to the downstream, has the maximum value at the mixing boundary part, and represents zero at the stagnation boundary part after which the stream flows reversely at the stagnation part.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.1
• /
• pp.44-52
• /
• 1987

For the favorable performance of a D.I. diesel engine, it is important to improve the mixture formation process and the ensuing early stage of combustion process. In the present paper, high speed photography was employed to investigate the effectiveness of a cavity digged in a piston crown for some more useful utilization of air. The cavity would function to improve mixing of fuel and air by the increase of turbulence of air and by the impingement of fuel spray on the cavity wall. The results obtained are summarized as follows: (1) From an aspect of thermal efficiency, it is effective to inject the spray tangentially to the cavity wall to enlarge the area of spray evaporation. (2) some deductions obtained from previous investigations using a hot air stream duct are supported by the present results. For example, it is effective for the quick development of flames throughout the combustion chamber to mix the evaporated fuel of main spray with the intermediates brought about by the early stage of combustion of the preceded auxiliary fuel spray.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.11 no.3
• /
• pp.362-367
• /
• 1987

Cylinder pressure level is defined the value of sound pressure level derived from relations of pressure and frequency which are obtained Fourier series expansion of cylinder pressure. CPL is alone in general use in combustion analysis without regarding attenuation coefficient determined by engine structure because it is almost constant in various kinds of engines. Combustion pressure fluctuation and influence of CPL was investigated in this paper using Wiebe combustion function superposition th obtain the effect of premixed and diffusive combustion. The results are as follow. (1) Influence of combustion maximum pressure(P$\sub$max/) on CPL is correspond with total energy per cycle well. (2) P$\sub$max/, .DELTA.P$\sub$max/, (dp/d.theta.)$\sub$max/ and (d$\^$2/p/d.theta.$\^$2/)$\sub$max/ are very effective on CPL in the range of low frequency, mid-low frequency, mid-high frequency and high frequency respectively.