• Korean Journal of Optics and Photonics
• /
• v.30 no.4
• /
• pp.142-145
• /
• 2019

Normally, a corner cube retroreflector (CCRR) sheet is used as a retroreflective mirror array (RRMA) in a volumetric display. Each CCRR unit reflects light in the retroreflective direction, which is parallel to the incident light, and it makes a blurred image, as it shifts the position of light within its dimensions. Adopting a "curved planar wall" and "parabolic focusing" (x-axis), a hybrid-t(transverse direction)-RRMA is proposed, to improve the image quality and brightness. The improvement of image contrast is achieved by tuning a "linear v-shaped groove" structure to a "parabolic v-shaped groove". Also, the system has been simplified and the brightness enhanced 4 times by removing the half mirror.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.1
• /
• pp.1-7
• /
• 2014

A stretchable polymeric membrane shaped diffuser was used to homogenize the coherent laser beam. The developed RGB module was used to focus and defocus test by beam combiners. Average oscillation frequency was set at 180Hz~300Hz and it resulted in the best homogenization effect in visual range. The blue laser module turned out to be the worst case for the transmission and primary reason is believed to be the short length of irradiated laser beam. The developed system removed the speckling and the brightness was decreased by 10 ~ 20% for the RGB laser. Overall the brightness was decreased by 13% and homogenity with respect to the temporal axis was improved from 30fs to 110fs.

• Journal of IKEEE
• /
• v.5 no.1 s.8
• /
• pp.75-84
• /
• 2001

The reliable data relating to the condition of road surface is of increasing importance to deliver the road condition to driver and road management authority. This paper describes the development of a new high-speed. automatic, road data collection system, which collects the longitudinal road data with ${\sim}30cm$ interval covering full width of the road at 100km/h speed. The system calculates the international roughness index (IRI) from the collected data and displays the IRI and road profile data on the screen. To develope the system, we implement an optical range finder, advanced distance and motion detectors, and signal processing and display modules. The measurement accuracy of the system at 70km/h operation speed shows ${\pm}0.1m/km$ in the IRI for the standard road. To confirm the performance of the developed system, we also measure the IRI of a deployed highway road and compare the results with a conventional system and human eye measurement results.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.14 no.2
• /
• pp.485-492
• /
• 2010

In this paper, we propose a focusable table component for mobile application to support table form representation of various contents and manipulation such as focusing on the contents using the WFC which is a software module to support components of the window based GUI package. It is not easy for us to express contents with table attributes on mobile devices. Java provides several table components, but these are not suitable on the mobile environment. So we design and develop the extended table component to provide properly table form representation and manipulation on the mobile devices. Also, we provide a performance comparison between th supposed table component and Java Swing's JTable.

• Journal of the Society of Disaster Information
• /
• v.13 no.4
• /
• pp.422-441
• /
• 2017

Notifying emergency evacuation methods, accurate disaster location and evacuation route guidance can be very active alternatives to quickly minimize evacuation and casualties in disaster situation in the development of subway disaster prevention detection system that detects the disaster signs at the subway station early on the basis of Internet of things and leads passengers to evacuate. It's not easy to ensure perfect functioning of fire fighting facilities and equipments due to underground space structure with narrow exits. Therefore, we developed disaster provision EL Display integrated board that can induce the most efficient evacuation and the field experiment was conducted to examine the practical application in this study. Especially the applicability was verified by field application test because there is no case in which EL panels are used to evacuate disasters.

• Journal of the Semiconductor & Display Technology
• /
• v.18 no.1
• /
• pp.74-78
• /
• 2019

As software becomes larger and network technology develops, the management of distributed data becomes more popular. Therefore, it is becoming increasingly important to use blockchain technology that can guarantee the integrity of data in various fields by utilizing existing infrastructure. Blockchain is a distributed computing technology that ensures that servers participating in a network maintain and manage data according to specific agreement algorithms and rules to ensure integrity. As smart contracts are applied, not only passwords but also various services to be applied to the code. In order to reinforce existing research on smart contract applied to the blockchain, we proposed a dynamic conditional rule of smart contract that can formalize rules of smart contract by introducing ontology and SWRL and manage rules dynamically in various situations. In the previous research, there is a module that receives the upper rule in the blockchain network, and the rule layer is formed according to this module. However, for every transaction request, it is a lot of resources to check the top rule in a blockchain network, or to provide it to every blockchain network by a reputable organization every time the rule is updated. To solve this problem, we propose to separate the module responsible for the upper rule into an independent server. Since the module responsible for the above rules is separated into servers, the rules underlying the service may be transformed or attacked in the middleware. Therefore, the security mechanism using TLS and PKI is added as an agent in consideration of the security factor. In this way, the benefits of computing resource management and security can be achieved at the same time.

• Journal of the Semiconductor & Display Technology
• /
• v.21 no.4
• /
• pp.18-22
• /
• 2022

Photovoltaics (PV) power generation efficiency is affected by meteorological factors such as temperature and wind speed. In general, it is known that the power generation amount decreases because photovoltaics panel temperature rises and the power generation efficiency decreases in summer. Photovoltaics Thermal (PVT) power generation has the ad-vantage of being able to produce heat together with power, as well as preventing the reduction in power generation efficien-cy and output due to the temperature rise of the panel. In this study, the amount of heat collected by season and time was calculated for photovoltaics thermal modules using the International Weather for Energy Calculations (IWEC) data provided by the American Society of Heating, Refrigerating and Air-Conditioning Engineers (ASHRAE). Based on this, we propose a method of predicting the temperature of the photovoltaics panel using thermal analysis and then calculating the flow rate of coolant to improve power generation efficiency. As the results, the photovoltaics efficiencies versus time on January, April, July, and October in Jeju of the Republic of Korea were calculated to the range of 15.06% to 17.83%, and the maxi-mum cooling load and flow rate for the photovoltaics thermal module were calculated to 121.16 W and 45 cc/min, respec-tively. Though this study, it could be concluded that the photovoltaics thermal system can be composed of up to 53 modules with targeting the Jeju, since the maximum capacity of the coolant circulation pump of the photovoltaics thermal system applied in this study is 2,400 cc/min.

• 전자공학회논문지 IE
• /
• v.45 no.1
• /
• pp.7-14
• /
• 2008

In this paper, a new high resolution XGA-SLM is implemented through modification of a commercial TFT-LCD beam projector and its optical modulation characteristics as a spatial light modulator(SLM) is also analyzed. That is, the optics module, projection lamp and fans are removed from a commercial beam projector and instead, some electric circuits to compensate their removal are manufactured and then, by inserting them into the beam projector, a new XGA-SLM is finally implemented. From some characteristic experimental results of the implemented high resolution TFT-LCD SLM, the proposed TFT-SLM is found to have an good optical linearity in amplitude and phase modulation characteristics as a function of the input gray levels. Especially, through implementation of the suggested TFT-LCD panel, the implemented SLM is proposed as a new relatively low-cost and high resolution SLM for optical information processing.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.3
• /
• pp.190-196
• /
• 2016

This paper proposes a humanoid robot performance system for performing in public places, such as an event, exhibition, or street performance. The system of modular structures can be moved easily, and can be played by a module or a combination of modules. The system developed with open source-based software and hardware is easy to adapt and improve. The robot performance control program for controlling robots, displays, audios, videos, and performance instruments was developed using the open source language, Processing. The performance instruments were developed using the open source hardware, Arduino. The contents of the robot performance were composed of scene-specific image, background audio, computer graphics, and videos. For their control and synchronization, the performance control program communicates with the humanoid robots and the performance instruments. In addition, performance accessories required to represent the performance concepts are produced by 3D modeling and printing. In a public place, the robot performance is performed with the theme of celebrating a Halloween day.

• Journal of IKEEE
• /
• v.10 no.1 s.18
• /
• pp.55-61
• /
• 2006

In modern society, development of medical technology has extended the human life span. However, it has also caused some side-effects. Mostly old people who live alone are not available the medical service quickly when they are in emergency situations. Moreover heart related diseases as well are rapidly increasing with aging. This study proposes the emergency medical alarm system. This system measures the physiological signals such as ECG(electrocardiogram), temperature, and motion data, analyzes those data automatically, and sends the urgent message to the Emergency Medical Center and to their family. There are two main parts in the system. In the first part, physiological data acquisition part, the troublesome addition and deletion of body signals on existing proposed systems have been supplemented, which led to the modulized production by means of ECG sensor module, temperature sensor module, acceleration sensor module. The other part is mobile unit, which includes signal processing and transmission functions. And bluetooth allows two parts to communicate with each other. Data that are processed in the mobile unit are stored in the PC database through the WLAN using TCP/IP protocol.