• Korean Journal of Optics and Photonics
• /
• v.9 no.4
• /
• pp.251-257
• /
• 1998

The equivalent lens conversion is extended to lens group conversion, and the more generalized conversion method is developed. The new conversion method can be used for hte direct thick-to-thick lens conversion. By using the equivalent lens conversion, a thin lens system can be converted into various thick lens system which have different axial thicknesses, but those converted lens systems have identical paraxial property and similar aberration characteristic. For an example, the equivalent lens conversion technique is applied to modification of a thelephoto lens design. The axial thicknesses of the front group elements of the system are reduced to 75% of their original values. The modified design by using the equivalent lens conversion has same focal length with original, and it has smaller aberration changes than the other design of which axial thicknesses are changed only.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.20 no.4
• /
• pp.357-365
• /
• 2009

A general analysis of a microstrip-to-vertically mounted slotline(VMS) coupler is presented with a view to developing an equivalent circuit, and the efficient evaluation of the related circuit element values. Based on this theory, the effects of frequency and structure parameters such as aperture length and VMS width on the characteristics of the coupler are studied. In order to check the validity of the proposed analysis and design theory, a C-band linearly tapered slot antenna fed by an aperture-coupled back-to-back microstripline-to- VMS coupling structure is optimally designed using a hybrid genetic algorithm. Moreover, the computed characteristics from the network analysis is compared to the measurement and simulation results. The obtained results fully validate the efficiency and accuracy of the proposed network model.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.37 no.4
• /
• pp.15-24
• /
• 2000

The dielectric relaxation of high-dielectric capacitors could be understood as a dynamic property of the capacitor in the time domain, which is regarded as a primarily important charge loss mechanism during the refresh time of DRAMs. Therefore, the equivalent circuit of the dielectric relaxation of the high-dielectric capacitor is essentially required to investigate its effects on DRAM. Nevertheless, There is not any theoretical method which is generally applied to realize the equivalent circuit of the dielectric relaxation. Recently, we have developed a novel procedure for the circuit modeling of the dielectric relaxation of high-dielectric capacitor utilizing the frequency domain. This procedure is a general method based on theoretical approach. We have also verified the feasibility of this procedure through experimental process. Finally, we successfully investigated the effect of dielectric relaxation on DRAM operation with the obtained equivalent circuit through this new method.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.7 no.6
• /
• pp.1106-1115
• /
• 2006

In this paper, the transmission characteristics and equivalent circuit model of microstrip transmission line having defected ground structure (DGS) in multilayer substrates are described fur high frequency region. In order to perform the study, the second dielectric layer is attached additionally onto the bottom(ground) plane of the basic DGS microstrip line consisted of the microstrip line and DGS. The dielectric constant and thickness of the second dielectric layer are adjusted to get various transmission characteristics and model parameters, and to analysis the effect of the second dielectric layer ultimately. According to this paper, the effect and equivalent circuits due to the attached dielectric substrate are verified separately, and this is expected to be applied to high frequency circuit design in the future.

• Journal of Advanced Marine Engineering and Technology
• /
• v.34 no.8
• /
• pp.1195-1202
• /
• 2010

When modelling lots of induction motors to design and configure an engine room simulator, the 2 parameters equivalent circuit has many practical benefits as it reduces working hours considerably without requiring complicated technical data from makers except the ratings of motors. The basic properties such as torque and load current are shown well matched with real cases by this method, but almost the only drawback of 2 parameters circuit is that it reveals inherently higher power factor in the whole operation range due to disregarding the exciting current of the induction motor to maximize the simplification. This paper suggests a modelling module as a practical tool to compensate the power factor by inserting a virtual compensation current into the load current from 2 parameters equivalent circuit, and the simulated results show satisfactory outputs and the improved power factor indication by performance curves when compared to the cases of 2 parameters-equivalent circuit.

• The Journal of the Acoustical Society of Korea
• /
• v.30 no.6
• /
• pp.344-352
• /
• 2011

In this paper, the resonant characteristic of a Tonpilz transducer with a fixed tail mass has been studied by means of an equivalent circuit approach. An equivalent circuit has been designed to describe the characteristic of a Tonpilz transducer that has an additional resonance because of its fixed tail mass. The transmitting voltage response of the transducer calculated by the designed circuit has been compared with that by the FEA (finite element analysis) to confirm the validity of the circuit. This equivalent circuit approach produces identical results with the FEA, in which the variation of resonant frequencies and TVR has been clearly figured out in relation to the stiffness of the mounting fixture and the mass of the tail mass. The suggested equivalent circuit can be utilized to figure out the characteristics of the Tonpilz transducer more efficiently than FEA that requires much calculation time and revision of the models in accordance with the variation of design variables.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.21 no.3
• /
• pp.17-23
• /
• 2020

This paper proposes a simulation model using an equivalent circuit for the development of an MMC system. The MMC has been chosen as the most suitable topology for high voltage power transmission, such as a voltage-type HVDC, and it has dozens to hundreds of sub-modules in the form of a half-bridge or full-bridge connected in series. A simulation study is essential for the development of an MMC algorithm. On the other hand, it is virtually impossible to construct and implement MMC simulation models, including hundreds or thousands of switching devices. Therefore, this paper presents an MMC equivalent model, which is easily expandable and implemented by modeling the dynamic characteristics. The voltage and current equation of the equivalent circuit was calculated using the direction of the arm current and switching signal. The model was implemented on Matlab/Simulink. In this paper, to show the validity of the model developed using Matlab/Simulink, the simulation results of a five-level MMC using the real switching element and the proposed equivalent model are shown. The validity of the proposed model was verified by showing that the current and voltage waveform in the two models match each other.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.14 no.6
• /
• pp.1-5
• /
• 1977

The input equivalent resistances and operating properties of a transless double balanced modulator are quantitatively investigated in considerations of the nonlinear characteristics of diodes. The input equivalent resistances are derived from the power loss calculations of the circuit. Carrier suppression and modulation efficiency are calculated by using approximate equations which describe the dynamic curves of the diode circuits. The results are represented as a function of the voltage amplitude of a carrier signal owing to the nonlinear characteristics of diodes.

• Journal of the Korean Institute of Telematics and Electronics
• /
• v.20 no.2
• /
• pp.29-34
• /
• 1983

A simulated inductance, with a phase parameter control circuit containing only two resistors and one operational amplifier, is realized as a two terminal network. Analytical results of the proposed circuit avow that we can realize a simulated inductance for constant inductance value, and experimental results confirm the theoretical predictions. Error of maximum 4%, between theoretical and experimental results of equivalent inductance, has been observed over a wide range of frequencies up to about 100 KHz.

• Journal of Korea Society of Industrial Information Systems
• /
• v.6 no.3
• /
• pp.123-127
• /
• 2001

The prediction method of the parameter C/sub gs/ of CMOS transistor is proposed by calculating the mobil charge in inversion layer of COMS transistor. This parameter C/sub gs/ decided on the cutoff frequency in MOS transistor in RF range and coupled input and output. This parameter C/sub gs/ in RF range is very important parameter in small signal circuit model. This proposed method is contributed to developing software of extracting parameter value in equivalent circuit model. The method provide the important information to construct a RF nonlinear model for multifinger gate MOSFET. This method will be very valuable to develop a large signal MOSFET model for nonlinear RF IC design.