• Korean journal of applied entomology
• /
• v.59 no.1
• /
• pp.15-22
• /
• 2020

Two tephritid fruit flies are infesting pumpkins in Korea. Both are classified into genus of Zeugodacus. The striped fruit fly, Z. scutellata, males are attracted to a lure called Cuelure (CL), which has been used to monitor the occurrence of this fruit fly in the crop field. In contrast, no effective male lure was not developed to monitor the pumpkin fruit fly, Z. depressa. Protein diet lure has been used to attract females of most fruit flies. The addition of terpinyl acetate (TA) was effective to increase the attractiveness of Z. depressa. This study aimed to monitor the occurrence of Z. depressa in pumpkin field with TA-protein diet lure. To validate the efficiency of TA-protein diet lure, Z. scutellata was monitored in a year of 2019 using CL and TA-protein diet lures, and the yearly monitoring data were compared. The occurrence patterns derived from both lures were similar except late season after October. The extended catches of TA-protein diet lure might be explained by the adult diapause induction of Z. scutellata at late September. Monitoring Z. depressa with TA-protein diet lure gave two peaks at mid July and August-September, in which more than 80% catches were females. Based on the attractiveness of TA-protein diet lure, its wettable powder with an addition of spinosad insecticide was formulated and sprayed to pumpkin crops. After 7 days post-spray, the control efficacy recorded more than 70%. However, the control efficacies decreased as the time progressed after the spray. These results demonstrated the application of TA-protein diet lure for monitoring occurrence of Z. depressa in pumpkin-cultivating field conditions. The wettable powder containing spinosad can be applied to develop a new control agent against two pumpkin fruit flies.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.293-302
• /
• 2014

This study was carried out to develop rain shelter which can make an appropriate size and environment for Chinese cabbage rainproof cultivation. Fifty three farms with chinese cabbage rainproof cultivation system have been investigated to set up width and height of rain shelter. Mostly the width of 6m was desired for rain shelter and the height of 1.6m for their eaves, so these values were chosen as the dimensions for rain shelter. After an analysis of their structural safety and installation costs by the specifications of the rafter pipe, Ø$25.4{\times}1.5t$ and 90cm have been set as the size of rafter that such size costs the least. This size is stable with $27m{\cdot}s^{-1}$ of wind velocity and 17cm of snow depth. Therefore it is difficult to apply this dimension to area with higher climate load. In order to sort out such problem, the rain shelter has been designed to avoid damage on frame by opening plastic film to the ridge. Once greenhouse band is loosen by turning the manual switch at the both sides of rain shelter and open button of controller is pushed then switch motor rises up along the guide pipe and plastic film is opened to the ridge. Chinese cabbage can be damaged by insects if rain shelter is opened completely as revealed a field. To prevent this, farmers can install an insect-proof net. Further, the greenhouse can be damaged by typhoon while growing Chinese cabbage therefore the effect of an insect-proof net on structural safety has been analyzed. And then structural safety has been analyzed through using flow-structure interaction method at the wind condition of $40m{\cdot}s^{-1}$. And it assumed that wind applied perpendicular to side of the rain shelter which was covered by insect-proof net. The results indicated that plastic film was directly affected by wind therefore high pressure occurred on the surface. But wind load on insect-proof net was smaller than on plastic film and pressure distribution was also uniform. The results of structural analysis by applying pressure data extracted from flow analysis indicated that the maximum stress occurred at the end of pipe which is the ground part and the value has been 54.6MPa. The allowable stress of pipe in the standard of structural safety must be 215 MPa or more therefore structural safety of this rain shelter is satisfied.

• Journal of Bio-Environment Control
• /
• v.23 no.4
• /
• pp.281-287
• /
• 2014

This study was carried out to investigate the effect of transplanting methods on the growth and yield of paprika (Capsicumannuum L. 'Veyron' and 'Coletti') in coir culture during two seasons. The summer type sowed in late winter and harvested from summer and the winter type sowed in summer and harvested from early winter. Control plants grown on the 10cm rockwool block were transplanted on coir slab when the 8 leaves of seedlings were emerged, while plants of the young seedling transplanting(YST) grown on the 7cm rockwool block was put on the slab at time of 2-3 leaves developed. Plants of the temporary transplanting(TT) on the 10cm rockwool block were moved on the slab after 2-3 weeks underpinning cultivation, while plants of the blockless transplanting(BT) were directly transplanted in the slab when the seedlings have 2-3 leaves emerged. The plant height of the control and BT treatment were longer while that of TT showed the shortest among treatments. The bigger leaf size was observed in the YST and BT treatment. Leaf number of the BT treatment was increased, while that of TT was the lowest. There were no differences in fruit size, locules and thickness among treatments. The lower fruit weight was observed in the TT of the winter culture and fruits in the control and YST of the summer culture showed higher fruit weight. The percentage of marketable fruit appeared to be slightly higher in the winter culture than in the summer culture. There were no differences in marketable fruit rate among the treatments of the winter culture but, among the summer culture, the highest marketable fruit rate was observed in the BT with 93%. The yield of the YST and BT was higher and that of the TT was the lowest.

• Korean Journal of Biological Psychiatry
• /
• v.15 no.2
• /
• pp.101-109
• /
• 2008

Objectives : This study was conducted to examine the effects on food intake, body weight, and metabolic parameters by amisulpride administration in male and female mice, comparing the effects of risperidone and vehicle administration. Methods : Female and male C57BL/6 mice were grouped into low dose amisulpride(1.5mg/kg), high dose amisulpride(15mg/kg), risperidone(0.1mg/kg) and vehicle. Drugs were administered once daily through intraperitoneal injection over 21days. Body weight was measured weekly and food intake was measured daily. Levels of triglyceride, glucose, insulin and prolactin were determined at the end of experiment(on day 22). Results : In the female mice, low and high dose amisulpride as well as risperidone caused significant weight gains. But weight gains in amisulpride groups were numerically smaller than that of risperidone group. In male mice, only high dose amisulpride caused significant weight gain. Among weight gain groups, only weight gain of male mice with high dose amisulpride was significantly associated with increased food intake. Weight gain group in female mice did not show significant correlation with food intake. In male mice, both amisulpride groups showed significantly high plasma insulin levels compared to vehicle. In female and male mice, low and high dose amiulpride groups showed significant high plasma prolactin levels compared to vehicle. Triglyceride level were not significantly changed in all groups. Glucose level was changed significantly only in male risperidone group. Conclusions : Administration of amisulpride caused more significant weight gains in female and male mice than controls but changes of metabolic parameters were different according to sex of mice. Our results suggest that different mechanisms of amisulpiride are likely to affect weight gain between male and female mice.

• Journal of Mushroom
• /
• v.2 no.2
• /
• pp.76-87
• /
• 2004

This experiments were conducted to study on the economic analysis of Phellinus spp.(Comercial name: Sanghwang mushroom). These results were as follows: Phellinus spp. can be cultivated about 4 years by one time inoculation. This mushroom has been cultivated by the method of burying log into the soil(BM) at the first time. Recently, however, the method of hanging log on the shelves in the house(HM) is used, because HM has more advantage than BM that HM can be cultivated more pieces of logs than BM. On the other hand, HM is required to invest more 5,678,230Won for the equipments than the BM. And also, HM is required 14,400 pieces(2.8 times) more log numbers than BM 5,000 pieces. Also, HM is required more 3,680,000Won to purchase log, 1,104,000Won to purchase spawn. The cost of production is required to 20,180,971Won for BM, and 37,953,825Won for HM. Accordingly, product cost of HM is 1.9 times higher than BM. The operating cost is required to 1,207,712Won for BM, and 24,075,432Won for HM. Accordingly, operating cost of HM is 2.0 times higher than BM. The net income is 580,940,000Won for BM, and 1,683,300,000Won for HM. Accordingly, net income of HM is 2.9 times higher than BM. The income is 589,040,000Won for BM, and 169,718,000Won for HM. Accordingly, income of HM is 2.9 times higher than BM. In conclusion, HM is required 2.8 times more logs. HM has 1.03 times more products per a piece of log. HM has 1.9 times more production cost, and 2.0 times more operating cost. As you read above, HM and BM have two different aspects. BM is required less investment cost than HM, but BM has lower income because of the different capacity of production. By the comparing those two methods, HM is resulted more efficient method for the producing mushroom. Only in the side of cash flowing, the cash expenditure of BM is required less money at first year. But it has no production at first year. BM would get the income after 2 years buring the logs. The cash expenditure of HM is required much money for the equipments and the logs at first year, but HM would get the income at first year.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.8 no.1
• /
• pp.20-30
• /
• 1975

It is matter of fact processing technology must affects the quality and yield of final product and these also depend on the selection of raw material directly or indirectly. So that the estimation of tile preprocessing condition of shellfish is of great importance for distributors and processors. This study was attempted to establish the basic data for evaluating the processing suitability of baby clam, which is one of the five important shellfishes for domestic use and export. The important results are as follows: 1. The ratio of meat volume and meat weight to the holding capacity by shells may be useful for measuring the condition index of baby clams. 2. Baby clams grown in the beds with the composition of a large quantity of gravel were low in condition index value than in sand and mud. 3. If the green feed phenomenon was the prime consideration for canned baby clams, tile most suitable harvest season if October. In this period, the digestive tract in body was almost colorless. 4. As a whole, seasonal changes of moisture and fat content in baby clams were reversely correlated. Protein content increased from April and slightly decreased for a while from July to August and increased again from September. In March, the content of glycogen was 6.3 to 6.8 percent. From this period to October, glycogen was rapidly decreased. In October, it was only 0.1 to 0.2 percent but increased from November. There were little seasonal changes in pH value and crude ash content. The pH value of meat was 6.0 to 6.2 and crude ash content was about 2 percent. 5. By the results of condition index and chemical composition of baby clams, the suitable harvest season as raw materials for processing was from March to June and from September to October. 6. The steamed baby clam meat was packed with 2 percent salt solution containing 0.15 percent, citric acid or 0.5 percent $Na_2$ EDTA in a round sanitary tin can coated with C-enamel that is 203.9 ml by volume and sterilized for 60 minutes at $112^{\circ}C$. The canned product has shown a good result to reserve the natural characteristics of baby clam through six month storage at room temperature.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.398-407
• /
• 2018

The Purple pericarp (Prp) trait is a trait often bred for in black rice. Generally, the Prp trait is displayed in the color variations of seeds following the 9:3:4 purple, brown, and white ratio, respectively. The Prp trait is a recessive epistasis of two gene interactions; however, it is caused by the two complementation genes Pb and Pp. Here we present a study of the genetic characteristics of the Prp trait using an $F_1$ hybrid with a Pbpb Pppp genotype. This hybrid generated four seed colors with the following numbers: 3 dark purple, 6 medium purple, 3 brown, and 4 white (or 9 purple, 3 brown, and 4 white). However, further biochemical analysis of the all progenies divided them into two groups. One group had the Pb_ Pp_ allelic constitutions and contained cyanidin 3-O-glucoside (C3G) in both the dark purple or medium purple seeds. The other group, however, was absent of C3G in both the brown and white seeds, resulting in a ratio of 9:7, respectively. This segregation revealed the extended Mendelian 9:7 ratios of the complementary gene interactions with a good fitness in ${\chi}^2$ analysis. Further analysis revealed that brown seeds with the Pb_ pppp genotype corresponded with a null C3G, indicating that the Brown pericarp trait in rice is caused by a dominant allele of the Pb gene. Therefore, we conclude that the production of C3G is a main phenotype of the black and purple colored rice in the Prp trait, and it is governed by the complementary gene interactions between Pb and Pp genes.

• Journal of the Korean Chemical Society
• /
• v.64 no.2
• /
• pp.67-73
• /
• 2020

The study aimed to investigate in vitro lipid deposition of oleic acid, oleic acid methyl ester and cholesterol on a daily disposable (1-day lenses) and 3-days lenses over 3 days and changes of optical characteristics is also investigated. Artificial tear solutions were prepared to simulate actual tear compositions. Two types of contact lenses (1-day lenses (Senofilcon A) and 3-days lenses (silicone tripolymer)) were soaked in the artificial tear solutions within an incubator at 37 ℃ with 150 rpm for 8, 16, 24 hours. Lipid deposition (oleic acid, oleic acid methyl ester and cholesterol) were measured using high performance liquid chromatography (HPLC) instrument. In addition, measurements of oxygen transmissibility, light transmittance and observation of lens surface were conducted. The amount of lipid deposition on the 1-day lenses were 127.55 ㎍/lens for Day 1, 302.96 ㎍/lens, for Day 2, and 353.30 ㎍/lens for Day 3. The 3-days lenses were 46.22 ㎍/lens for Day 1, 66.07 ㎍/lens for Day 2, and 67.45 ㎍/lens for Day 3. Oxygen transmissibility were 81×10^-9(cm/sec)(ml O₂/ml×mmHg)(Baseline) and 48×10^-9(cm/sec)(ml O₂/ml×mmHg) (Day 3) for the 1-day lenses, it were 13.23×10^-9(cm/sec)(ml O₂/ml×mmHg)(Baseline) and 9.6×10^-9(cm/sec)(ml O₂/ml×mmHg) (Day 3) for the 3-days lenses. Transmittance of each lenses were 97.21% (Baseline) and 94.25% (Day 3) for the 1-day lenses, 97.65% (Baseline) and 95.15% (Day 3) for the 3-days lenses. Observation of surface deposition indicated greatest deposition for the 3-days lenses type on Day 3. Lipid deposition for both lens types increased by day and was greater for the 1-day lenses type. Surface deposition appeared to differ as it was greatest for the 3 days lens type, which may suggest other deposits such as protein may be present.

• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.32 no.1 s.55
• /
• pp.45-51
• /
• 2006

In the field of makeup cosmetics, especially, powder-based foundations such as two-way cake, pact and face powder, the quality of which is known to be strongly influenced by the properties of powder, surface treatment technology is widely used as a method to improve the various characteristics of powder texture, wear properties, dispersion ability and so on. The two-way cake or pressed-powder foundation is one of the familiar makeup products in Asian market for deep covering and finishing purpose. In spite of the relent progress in surface modification method such as composition of powders with different characteristics and application of a diversity of coating ingredient (metal soap, amino acid, silicone and fluorine), this product possess a technical difficulty to enhance both of the adhesion power and spreadability on the skin in addition to potential claim of consumer about heavy or thick feeling. This article is covering the preparation and coating method of nano-vesicle that mimic the double-layered lipid lamellar structure existing between the corneocytes of the stratum corneum in the skin for the purpose of improving both of two important physical characteristic of two-way cake, spreadability and adhering force to skin, and obtining better affinity to skin. Nano-vesicle was prepared using the high-pressure emulsifying process of lecithin, pseudo ceramide, butylene glycol and tocopheryl acetate. This nano-sized emulsion was added to powder-dispersed aqueous phase together with bivalent metal salt solution and then the filtering and drying procedure was followed to yield the nano-vesicle coated powder. The amount of nano-vesicle coated on the powder was able to regulated by the concentration of metal salt and this novel powder showed the lower friction coefficient, more uniform condition of application and higher adhesive powder comparing with the alkyl silane treated powder from the test result of spreadability and wear properties using friction meter and air jet method. Two-wav cake containing newly developed coated powder with nano-vesicle showed the similar advantages in the frictional and adhesive characteristics.

• Korean Journal of Poultry Science
• /
• v.34 no.2
• /
• pp.91-97
• /
• 2007

To evaluate the physiological status of laying flocks, the blood chemistry values were measured and analyzed in various ages under different feeding conditions. Total 671 birds from 48 Hyline brown hens flocks from 13 different poultry farms were bled at the ages of day(s) 1, 11, 21, 50, 80, 120, 180, 240, 300, 400, and 500. The 17 blood chemistries including glucose, lipids, proteins, enzymes, electrolytes and metabolic by-products were measured with an autoanalyzer. Blood glucose showed the highest at the hatching day not relate with the dietary carbohydrates and energy, but tended to decrease during the rest of growth stage in hens. Total blood protein, albumin and globulin increased depending on the ages even though dietary protein was decreased. Blood lipid was greatly changed at different growth stages. Cholesterol was the highest at hatching period and maintained consistently until the 120 days of age. It was increased in birds after 180 days of age. HDL was also highest in hatchery, but decreased greatly after 180 days of age. However, TG was the lowest at one day old, but was increased up to 10 times after 180 days of age compared to that of one day old. The enzyme activities were different. AST, ALT, and GGT showed comparatively contained consistently, whereas amylase was slowly decreased. Blood P, Na, K and Cl showed consistency, but Ca content was increased upto two times of the one day of age. The results from this study showed that the blood chemistry values were affected by the general metabolic status of the host with ages not by feeding conditions. Further, the standard data of age-dependent blood chemistry values in the laying flocks were obtained, which can be utilized for early detection of the changes in the physiological status occurred by the infectious or metabolic diseases. The results of these analyses seemed to be useful to increase the productivity of laying flocks through rapid and proper veterinary medical treatments.