• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.17 no.1
• /
• pp.153-158
• /
• 2017

Rendezvous point is used to gather the data from sensor nodes and send to sink node efficiently in selected area. It incurs a unbalanced energy consumption nearby the rendezvous point which can shorten the network life time shortly. Thus, it is very important to select the rendezvous point effectively among all sensors in order to not drain the battery of a sensor node in construction sites. In this paper, we propose a rendezvous point replacement mechanism which considers remaining energy of nodes to prolong the network lifetime. Also, for shortening the distance of drone at the same time, it increases the probability of the near-by drone node becoming rendezvous point. The simulation results show that the proposed scheme can significantly improve the network lifetime and the flight distance compared with the existing LEACH, L-LEACH algorithm.

• Proceedings of the Korean Society of Computer Information Conference
• /
• 2022.01a
• /
• pp.325-326
• /
• 2022

최근 무인 항공 기술의 발전과 함께 드론의 상업적 활용이 가속화되고 있다. 산업계 및 학계에서는 인공지능, 사물인터넷 등 지능정보기술을 활용하여 드론 응용에 자율 비행을 적용하고자 노력하고 있지만 해결되지 못한 문제들이 산적해 있다. 그러므로 완전 자율 비행은 아니지만, 드론 조종에 경험이 없는 비전문가도 드론을 용이하게 조정할 수 있는 반자동 방식의 비행 제어를 채택한 드론 응용이 개발이 필요하다. 따라서 본 논문에서는 실내환경에서 정찰 임무 수행을 위한 반자동 비행 조종 시스템을 제안한다. 제안한 시스템은 교차로 지점마다 사용자에게 이동 방향을 선택할 기회를 제공하고 교차로 간 일정한 속도 및 벽면과의 일정한 간격으로 자율비행하도록 제어한다. 또한, 실내 측위 기술인 ORB-SLAM 알고리즘을 이용하여 드론이 실내 공간 및 자신의 위치를 파악하도록 한다.

• Proceedings of the Korea Contents Association Conference
• /
• 2017.05a
• /
• pp.149-150
• /
• 2017

오늘날 세계는 4차 산업의 흐름속에 놓여져있고, 컴퓨터는 단순히 소프트웨어적인 부분에서 벗어나 각종 센서들과 인터넷 등 다양한 장치들과의 결합을 통합하여 스마트 폰, 드론 등과 같은 복합적인 결과물들이 생겨나고 있다. 그렇지만 우리는 이러한 제품들을 간단하 설명 혹은 때로는 아무런 설명서 없이 직관적으로 사용한다. 그 부분에 의문이 생겼고 그렇게 조사한 결과 가장 중요한 역할을 하는 분야가 다름아닌 디자인의 UI임을 알았다. 각종 센서들의 결정체이자 4차 산업의 핵심 산물 중 하나인 드론을 중심으로 UI를 연구해볼 것이며, 또 드론 시장을 이끌어가는 중국 제품을 중심으로 살펴보고 앞으로의 UI디자인의 방향등을 연구할 것이다. 더 나아가 4차 산업에서 디자인이 어떤 역할을 하는지 심도있게 고찰해보고자 한다.

• Annual Conference of KIPS
• /
• 2020.05a
• /
• pp.338-341
• /
• 2020

최근 무인이동체 기술과 IoT(사물인터넷)의 발전에 따라 드론에 대한 관심과 사용이 꾸준히 증가하고 있다. 드론은 취미용으로 사람들에게 재미를 주는 것에서 나아가 긴급서비스, 조기정보, 모니터링 등 이용되는 분야가 다양하고 사람들의 편의에 맞게 분야와 활용목적이 점점 늘어나고 있는 추세이다. 하지만 이에 따라 불법몰카나 드론을 사용한 테러 등 악의적으로 드론을 악용하는 사례 역시 빈번하게 발생하고 있다. 이를 예방하고 사전에 차단하기 위하여 본 논문에서는 주파수 송수신기인 Hack-RF One과 라즈베리파이, 안테나를 활용하여 Anti-Drone 시스템 프로토타입을 구현하였다.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.19 no.6
• /
• pp.41-46
• /
• 2019

In this paper, it is necessary to study the bandwidth and network system for efficient image transmission in the current era of drone imaging, and to design routing protocols to round out and cluster two or more multi-drones. First, we want to construct an ad hoc network to control the multidrone. Several studies are underway for the clustering of drones. The aircraft ad hoc network (FANET) is an important foundation for this research. A number of routing protocols have been proposed to design a FANET, and these routing protocols show different performances in various situations and environments. The routing protocol used to design the FANET is tested using the routing protocol used in the existing mobile ad hoc network (MANET). Therefore, we will use MANET to simulate the routing protocol to be used in the FANET, helping to select the optimal routing protocol for future FANET design. Finally, this paper describes the routing protocols that are mainly used in MANET and suitable for FANET, and the performance comparison of routing protocols, which are mainly used in FANET design.

• Korean Security Journal
• /
• no.46
• /
• pp.189-216
• /
• 2016

In March 2015, the North Korean UAVs (Unmanned Aerial Vehicles) were found and countries around the world have actively developed UAVs. UAVs or Drone have become commercialized and more civilians use UAVs for leisure. The positive possibilities of UAV use expand. However, there could be the negative sides of UAV use. The UAVs could be used for the purpose of various crime, cybercrime, and terrorism. For instance, hacking devices attached drone could be infiltrated into the sensitive networks to steal personal informations and public data. This could be a new dimension of cybercrime. As the number of internet users and cyberspace rapidly expands, problems of crimes could be worsened both quantitatively and qualitatively. By contrast, defensive measures against such threats are limited. Especially, the Korean society is vulnerable despite its well-advanced internet and computer network technology. This article investigates the current UAV types and its developments, discusses various possibilites of UAV-related crime, cybercrime, and terrorism, and proposes responses.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.18 no.4
• /
• pp.97-104
• /
• 2018

In the conventional direction finding, the antenna is installed at a high position on the ground to detect the position of the target with the environment of the LOS(Line of Sight) as much as the signal receiving environment. However, in order to configure such environment, high cost and installation time were required. In this paper, we use TDOA(Time Difference of Arrival) technique to utilize drones in direction finding, so that four drones can be used for directions finding simulation. Simulations based on drone and TDOA direction finding were constructed using additional signal processing Taylor series and Exact Interactive Algorithm. In the simulation, the receiving power is defined by using the 800MHz path-loss model using the GPS information of the ground direction detection, and the position estimation performance is analyzed when the TDOA technique, the Taylor series, and the Exact Interactive Alogrithm are applied.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.21 no.6
• /
• pp.147-153
• /
• 2021

The purpose of this study is to establish strategic suggestions for the direction of the drone-related business by Gyeonggi-do through a survey on the operation and actual conditions of the drone geospatial information service business experienced by Gyeonggi-do civil servants. For this purpose, as a result of surveying the demand survey of 219 people in charge of drone field work, it was analyzed by dividing it into four categories: technology-based operation support, business discovery and support, legal and institutional support, and education and public relations. As an improvement measure, technology-based operation support is to secure service operation efficiency by establishing a dedicated manpower and a dedicated organization and securing drone-related experts.The plan for improvement of project discovery and support is as follows. 1) The government proactively discovers prior research projects for project discovery and support; 2) Legal and institutional support requires support services for simplification of administration such as drone geospatial data shooting schedules and permits, 3) legal and institutional review on improving the scope and restrictions for using drone geospatial data. In the field of education and publicity, it is necessary to operate an education program on the overall operation of drones, and to conduct seminars for each field and use, and to seek activation methods through practical application guidelines for the application process and system. The limitation of this study is that the survey subjects are related to Gyeonggi-do, and in the future, survey analysis through a wide range of participants is required.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.24 no.1
• /
• pp.125-132
• /
• 2024

The purpose of this study is to discover a drone utilization model tailored to local characteristics, propose directions for building a drone demonstration city based on demand surveys for drone activation, and suggest ways to utilize and support a drone application system. First, according to the survey results, there was a high understanding of and necessity for drone demonstration projects, particularly in addressing urban issues, which were deemed to have a significant impact. Second, based on the analysis of priorities and short- and long-term approaches, disaster-related tasks were evaluated as a priority, requiring an approach through medium- to long-term strategies. Third, it was noted that budgetary considerations emerged as the most critical issue during project implementation. Practitioners and experts expressed willingness to actively introduce drone-based technologies into their work when budget and technology were ready. Budgetary constraints were identified as the most significant obstacle to proper implementation, emphasizing the need for resolution. Fourth, the necessity of demand surveys during project development was identified in certain areas. Demand surveys were deemed essential for drone-based demonstration city construction, and a survey indicated that public leadership in this regard was also necessary. Fifth, concerning approaches in specific areas, the field of safety and disaster management was highlighted as the most crucial for application.

• Proceedings of the Korean Society of Broadcast Engineers Conference
• /
• 2015.07a
• /
• pp.308-309
• /
• 2015

최근 들어 일반인들도 다중 콥터와 4k 고성능 카메라를 장착한 상용 드론을 구매하여 자신의 취미 활동용으로 사용하고 있다. 드론을 이용한 많은 동호회가 생겨나고 1인 1드론, 개인용 드론의 시대가 시작되고 있다. 또한 사물인터넷의 시대에 걸맞게 아두이노, 라즈베리파이와 같은 오픈하드웨어 플랫폼과 오픈 소스를 이용하고 저가형 3D printer 의 보급으로 자신만의 독특한 형태를 지니는 기체 제작을 시작하고 있다. 이에 본 논문에서는 3D 캐드를 이용한 위상최적화 기법을 적용하여 기존 상용 기체의 강성은 그대로 유지하되 기체 프레임 무게를 절반으로 줄인다. 또한, 풍동실험을 진행해서 기존 기체에서 발생하는 유체흐름을 분석하고 새로운 기체를 적용했을 경우에도 유사한 유체흐름이 나타나도록 설계하여 3D 프린터를 사용하여 제작하였다.