• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.17 no.9
• /
• pp.302-307
• /
• 2016

The technology of multistage deep drawing has been widely applied in the metal forming industry, in order to reduce both the manufacturing cost and time. A battery can used for mobile phone production is a well-known example of multistage deep drawing. It is very difficult to manufacture a battery can, however, because of its large thickness to height aspect ratio. Furthermore, the production of the final parts may result in assembly failure due to springback after multistage deep drawing. In industry, empirical methods such as over bending, corner setting and ironing have been used to reduce springback. In this study, a bottoming approach using the finite element method is proposed as a practical and scientific method of reducing springback. Bottoming induces compression stress in the deformed blank at the final stroke of the punch and, thus, has the effect of reducing springback. Different cases of the bottoming process are studied using the finite element program, DYNAFORM, to determine the optimal die design. The results of the springback simulation after bottoming were found to be in good agreement with the experimental results. In conclusion, the proposed bottoming method is expected to be widely used as a practical method of reducing springback in industry.

• Transactions of Materials Processing
• /
• v.6 no.5
• /
• pp.416-424
• /
• 1997

In the present study, a contact search and check algorithm for general tool surface described by triangular FE patch is proposed. To improve numerical stability, SEAM element using the linear Coons interpolation has been used. To check the proposed algorithm, both clover cup and L-shape cup deep drawing processes are calculated. The computed results shows that the proposed contact algorithm can be successfully applied for sheet metal forming processes with general shaped tools.

• Proceedings of the CALSEC Conference
• /
• 2001.08a
• /
• pp.105-109
• /
• 2001

성형의 종류 ◈금속 성형 ㆍ 스탬핑(Stamping) ㆍ 정밀 블랭킹(Fine Blanking) ㆍ 딥 드로잉(Deep Drawing) ㆍ 다이캐스팅(Die Casting) ㆍ 인베스트먼트 주조(Investment Casting) ㆍ 분말 야금(Power Metallurgy) ㆍ 인발(Wire Drawing) ㆍ 압출(Extrusion) ㆍ 단조(Forging) ㆍ ㆍ코이닝(Coining) ㆍ... ◈비금속 성형 ㆍ 사출(Injection) ㆍ 압축(Compression) ㆍ 블로우 성형(Blow Molding) ㆍ 진공 성형(Vacuum Molding) ㆍ 발포 성형(Foam Molding) ㆍ 피복(Encapsulation) ㆍ 회전식(Rotational) ㆍ 주조(Casting) ㆍ 적층(Laminating) ㆍ 압출(Extrusion) ㆍ...(중략)

• Proceedings of the Korean Society for Technology of Plasticity Conference
• /
• 1998.06a
• /
• pp.65-73
• /
• 1998

The design analysis of axisymmetric, multi-stage deep drawing dies was performed using the rigid-viscoplastic finite element formulation. In the formulation, the axisymmetric CFS algorithm was employed. Hill's non-quadratic normal anisotropic yield criterion and isotropic hardening rule were considered. For trial initial displacements and tool contact points, the geometric force equilibrium method was adopted. In order to see the validity of the formulation, the multi-stage deep drawing processes of shell-cylinder front part of hydraulic booster were simulated. The simulation showed good agreements with measurements and PAM-STAMP.

• Transactions of the Korean Society of Mechanical Engineers
• /
• v.16 no.10
• /
• pp.1853-1860
• /
• 1992

The plane-strain stamping process is analyzed by a forming energy minimization method in order to obtain forming load, slip length and strain distribution in each step of punch stroke. All the developed programs are integrated into total CAD/CAE SYSTEM for the purpose of the practical usage in die design. The computed strain distribution and the amount of draw-in are compared with those of the actually developed panel It is found that there is a good agreement between theoretical and experimental results.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2003.03a
• /
• pp.24-24
• /
• 2003

최근 자동차 산업이 발달함에 따라 철강업계와 자동차 회사에서는 전에 많이 사용하던 내연 무도금강판 대신 부식에 저항력이 강한 도금강판을 사용한 이후로 냉연강판의 가공 시에 야기되지 않았던 많은 문제점들이 나타났다 자동차용 강판의 경우 판재의 체적에 비하여 금형과 판재의 접촉면적이 큰 프레스 공정에서는 판재의 표면에 작용하는 마찰력의 크기가 판재의 스탬핑 성형성에 큰 영향을 미친다. 이는 마찰특성이 비록 재료고유의 성형한계에서는 영향을 미치지 못하나 스탬핑 공정에 있어서 금형과의 접촉면에서 마찰력의 크기가 패널의 변형률분포를 변화시켜 스탬핑 성형성에 큰 영향을 주는 것이다. 따라서 본 연구는 자동차용 도금강판의 표면 거칠기에 따른 판재의 표면 마찰 특성 변화를 알아보았다. 소재의 기계적 특성 측정은 UTM을 사용하였고, 도금층은 XRD, SEM을 이용하여 상분석 하였으며, 표면 거칠기는 AFM(Atomic Force Microscope), SJ-400(Mitutoyo)을 사용하여 표면 거칠기를 측정하였다. 또 드로잉 하중을 비드부에서의 굽힘-굽힘 풀림 소성변형에 의한 변형력 성분과 마찰력 성분으로 분리하여 강판의 쿠롬 마찰계수를 DBS(Draw bead simulation)로 측정하였다.

• Journal of the Korean Society for Precision Engineering
• /
• v.16 no.7
• /
• pp.24-31
• /
• 1999

Bulging is a forming method to shape of die cavity by using hydraulic pressure in tube or vessel. Bulging machine and die were developed in order to produce vessel for keeping warm. Bulging machine is a double type with two horizontal cylinders for bulging of two pieces at the same time. The developed die system has one bulging die and two drawing dies for necking at the both ends of tube. The diameter of tube expands by hydraulic pressure in tube. at the same time, thrust at the both ends of tube. pushes tube in the direction of expansion to obtain high expanding rate with no crack. In this study, the bulging properties were investigated to solve tube crack and necking in manufacturing vessel by the combination method of bulging and drawing. As a result, high expanding rate of tube radius without crack, precision necking and high productivity were obtained.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1996.04a
• /
• pp.766-770
• /
• 1996

In this study, a CAD/CAM system for axisymmetric deep drawing processes has been developed. An approach to the system is based on the knowledge based system. Under the environment of CAD/CAM software of Personal Designer, the system has been written in UPL. The geometries of intermediate and final object in deep drawing process, including processes parameters are input for the CAD/CAM system. The input data can be obtained from the results of Pro-Deep. The parts drawing of die sets for each process is generatedin tool design module of the CAD/CAM system. Also, the die assemblydrawings can be obtained. NC commands for machining of the part can be generated in the developed CAD/CAM system.

• Design & Manufacturing
• /
• v.2 no.1
• /
• pp.1-5
• /
• 2008

Restriking method is to add to process in order to get the correct size and high precision accuracy of product which is formed in pre-process. This method is widely used at bending work and drawing work. Restriking die is particularly design and used as restriking process is performed. Therefore, production cost is increasing as one process or a two process are added. In this paper, punches and die block of square shell drawing die which could be performed drawing work and restriking process by using only one die are designed in order to solve these factors. The structure of sectional die which can integrate drawing die and restriking die was developed.

• Design & Manufacturing
• /
• v.2 no.4
• /
• pp.16-23
• /
• 2008

This paper describes $R_p,\;R_d,\;R_c,\;R_{cp},\;R_{cd}$ for design and manufacture of die by comparing the results. Results of this study could be reduced from three processes to two processes and drawing can be conducted using one die set by modifying structure of the punch head and die plate. Oil canning phenomenon can be prevented when circle blanking or ellipse blanking in blanking drawing. $R_c$, the important factor of drawing process was able to evaluate properly in designing of product.