• Journal of The Korean Association For Science Education
• /
• v.36 no.2
• /
• pp.269-277
• /
• 2016

Recently, there has been a dramatic increase in the number of cases that have formed and operated teachers' learning communities through cross-curricular consulting at the school level. The purpose of this study is to explore cross-curricular instructional consulting as an activity of teachers' learning communities at the school level, and investigate the effect of cross-curricular instructional consulting on middle school science teaching. We analyzed features and limitations of cross-curricular instructional consulting revealed in three case studies in middle school, including open classes and instructional consulting sessions, and conducted additional instructional consulting on the same videotaped science classes with science experts from outside. According to the results, science inquiry experiments are often replaced with text reading and interpreting, students' misconceptions and exact scientific representations are ignored, and the goal setting as well as class coverage has been questionable and disputable in science classes resulted from cross-curricular instructional consulting. Discussed in the conclusion are the necessity of cross-curricular instructional consulting in middle school, and ways to overcome limitations of the method of cross-curricular instructional consulting, including alternatives to a praise-only policy in cross-curricular instructional consulting, ways to use cross-curricular instructional consulting without compromising the subject's essence, and ways to improve the undue authority of consultants.

• Korean Chemical Engineering Research
• /
• v.51 no.1
• /
• pp.116-120
• /
• 2013

Characteristics of photocatalytic CO removal process conducting CO conversion by using Pt loaded $TiO_2$ photocatalyst were investigated in a photocatalytic tubular reactor. Effects of Pt loading method onto $TiO_2$, linear velocity of gas stream containing CO gas, CO concentration and moisture content in the gas stream on the conversion of CO to $CO_2$ were examined. It was found that the CO gas could be removed almost 100% by using photocatalytic tubular reactor internally coated with Pt/$TiO_2$ photocatalyst under UV irradiation, when the linear velocity of gas stream was in the range of 0.01~0.25 m/s and CO concentration in the gas stream was ranged from 20 to 100 ppm and the relative humidity of the gas stream was in the range of 20~40%. The conversion of CO gas decreased gradually with increasing linear velocity of gas stream and CO concentration in the gas stream. The moisture in the gas stream could promote the removal of CO gas by means of the generation of OHradicals.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.36 no.6
• /
• pp.955-967
• /
• 2016

As transportation systems for connecting lands and islands, oversea long-span bridges, underwater tunnels, and immersed tunnels have been mainly used so far. Submerged floating tunnels (SFTs) moored under specific water depth are one of the newest oversea transportation system. Compared to other existing systems, the new system requires relatively less construction cost and time. But, there is still no construction example. For reasonable design of the tunnel and mooring lines the rational structural analysis should be firstly performed. Unlike common transportation structures, the submerged tunnels are mainly affected by the wave, vary irregular excitation component. So, the analysis scheme might be difficult because of the characteristics of the submerged structures. This study aims to suggest the rational global performance analysis methodology for the submerged tunnels. Using ABAQUS the dynamic response of the experimental models studied by KIOST (2013) was investigated considering regular waves. By comparing the simulation results with the experimental results, the feasibility of the numerical simulation was verified. Using the suggested method, the effects of initial inclination of the tethers and draft of the tunnel on the dynamic behavior were studied. In addition, dynamic response of a SFT under the irregular wave was examined.

• Journal of Broadcast Engineering
• /
• v.16 no.3
• /
• pp.448-461
• /
• 2011

H.264/AVC significantly outperforms the previous video coding standards with many new coding tools. Among these tools, several intra-block coding tools can particularly improve coding efficiency. For intra prediction, H.264/AVC supports most probable mode in the entropy coding process to reduce syntax elements indicating intra prediction modes and most probable mode selection ratio is very high. Also, in general, natural images and videos have many homogeneous regions whose high correlation with neighbouring blocks. In this paper, we propose intra prediction mode SKIP mode using decoder-side prediction to improve the coding efficiency. The proposed method is determined the optimal prediction mode using only neighbouring block's information and coded on the basis of the conventional prediction/transform coding. And the prediction modes are not send to decoder at all. Skipped intra prediction mode is determined by decoder. Experimental results show that the proposed method achieves coding gains of 1.40% for common intermediate format(CIF), 3.24% for 720p sequences against the H.264/AVC JM 17.0 reference software.

• Journal of Advanced Marine Engineering and Technology
• /
• v.40 no.7
• /
• pp.663-670
• /
• 2016

This paper introduces the concept of the computer-aided engineering(CAE) design method for a bypass valve in a system that is used for the safe lifting of mineral resources in deep-seabed mining. Although the bypass valve has a simple mechanism, its design is very difficult because of various influencing factors. This equipment, which has a complex design process, should be developed by CAE-based design method. The method can perform the design, design verification, and virtual experiment at the same time. In this study, the CAE-based method for the design of the bypass valve has been developed using fluid dynamics, multi-body dynamics, and optimization method.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.372-372
• /
• 2014

반도체 검출기는 입사되는 X선 에너지에 의하여 이온화되어 발생하는 전자 전공쌍을 수집함으로 방사선 정보를 확인하는 선량계로써 많은 연구와 활용이 이루어지고 있다. 하지만, X선 에너지에 의하여 반도체 검출기에서 발생하는 전기적 신호량이 높지 않기 때문에 누설 전류의 저감이 필수적이다. 누설 전류를 저감시키기 위한 방안으로 반도체 층과 전극 층의 Schottky Contact 구조의 설계, Insulating Layer의 사용, 높은 비저항의 반도체 물질 연구 등이 이루어지고 있다. 하지만, 기존에 누설 전류 저감을 위하여 Insulating Layer를 전극층과 반도체 층 사이에 형성하는 연구에 있어서 Insulating Layer와 반도체 층의 계면 사이에서 발생하는 Charge Trapping으로 인하여 생성되는 신호의 Reproducibility 저하, 동영상 적용의 제한 등의 문제점을 겪어왔다. 이에 본 논문에서는 누설 전류를 저감시킴과 동시에 Charge Trapping의 최소화를 이루기 위하여 Insulating Layer의 두께 최적화 연구를 수행하였다. 본 연구에서 사용한 Insulating Layer는 검출기 표면에 입사하는 X선 정보 손실을 최소화 시키는 동시에 누설 전류와 Charge Trapping을 최소화 시키는 방법으로써 CVD방법으로 검출기 표면에 균일하게 Insulating Layer를 코팅하였다. Insulating 물질은 Parylene을 사용하였으며, 그 중 온도, 습도 등 외부환경에 영향을 적게 받는 type C를 사용하였다. 증착에 사용한 장비의 진공도는 Torr로 설정하여 증착되는 Parylene의 두께가 약 $0.3{\mu}m$가 되게 하였으며, 실험에는 반도체 물질 PbO를 사용하였다. Parylene의 절연 특성은 Dark Current와 Sensitivity를 측정한 SNR을 이용하여 Parylene코팅이 되지 않은 동일 반도체 검출기와의 신호를 비교하였으며 또한 Parylene를 다층 제작한 검출기의 수집 신호량을 비교하였다. 제작한 검출기의 X선 조사 시의 수집 전하량 측정 결과, 100 kVp, 100mA, 0.03s의 X선 조건에서 $1V/{\mu}m$의 기준 시, Parylene를 코팅하지 않은 PbO 검출기의 Dark current는 0.0501 nA/cm2, Sensitivity는 0.6422 nC/mR-cm2, SNR은 12.184이었으며, Parylene단층의 두께인 $0.3{\mu}m$로 증착된 시편의 Dark current는 0.04097 nA/cm2, Sensitivity는 0.53732 nC/mR-cm2으로 Dark current가 감소되고 sensitivity도 감소하였지만 SNR은 13.1150으로 높아진 것을 확인할 수 있었다. Perylene이 $0.6{\mu}m$로 증착된 시편의 경우, Dark Current는 0.04064 nA/cm2, Sensitivity는 0.31473 nC/mR-cm2, SNR은 7.7443으로써 Insulating Layer가 없는 시편보다 SNR이 약 40% 낮아진 것을 확인할 수 있었다. Parylene이 $0.9{\mu}m$로 증착된 시편의 경우 Dark current는 0.0378 nA/cm2, Sensitivity 0.0461 nC/mR-cm2로 Insulating Layer가 없는 시편에 비해 SNR은 약 1/12배 감소한 1.2196이었고, Parylene이 $1.2{\mu}m$로 증착된 시편의 SNR은 1.1252로서 더 감소하였다. 따라서 Parylene을 다층 코팅한 검출기일수록 절연 효과의 영향이 커짐으로써 SNR 비교 시 수집되는 신호량이 줄어드는 것을 확인하였다. 반도체 검출기의 누설 전류를 저감시킴과 동시에 신호 수집율에 영향을 최소화시키기 위하여 Insulating Layer의 두께를 적절하게 설정하여 적용하면 Insulating Layer가 없는 검출기에 비해 누설전류를 최소한으로 줄일 수 있고 신호 검출효율이 감소하는 것을 방지할 수 있을 것이라 사료된다.

• Journal of the Korea Institute of Building Construction
• /
• v.16 no.5
• /
• pp.405-412
• /
• 2016

In order to examine the possibility of practical use of concrete at low-temperature environment using high early strength cement with cold resistance admixture, an experimental study on workability, freezing temperature and compressive strength of the mortar with different types of anti-freezer, water reducing agent and accelerator for freeze protection at low-temperature were evaluated. Compressive strength was increased in use of anti-freezer, especially SN anti-freezer was higher than CN anti-freezer. 0min flow was increased, the 20min flow was decreased. And 20min flow was improved in use of FR, RT water reducing agent. CF, LS accelerator for freeze protection, regardless of the type of water reducing agent, compressive strength was increased.

• Journal of the Korea Institute of Building Construction
• /
• v.12 no.2
• /
• pp.203-210
• /
• 2012

Recently, the interest and demand for large-scale buildings and skyscrapers have been on the rise, and the performance of concrete is an area of high priority. Securing 'mass concrete and high strength concrete' is very important as a key construction technology. For high strength concrete, the high heat of hydration takes place inside the concrete because of the vitality of hydration in cement due to the large amount of powder, and leads to problems such as an increase of thermal stress due to the temperature difference with the outside, which results in cracks and slump loss. For this reason, measures to solve these problems are needed. This study aims to reduce the hydration heat of high strength concrete to control the hydration heat of mass concrete and high strength concrete, by replacing the type of admixture, The purpose of this study is to control the hydration heat of high strength concrete and mass concrete. Our idea for this purpose is to apply not only the types and contents of admixture but also incorporation mixing water to ice-flake. As a result of the test, the use of blast furnace slag and fly ash as admixture, and the use of ice-flake as mixing water can improve the liquidity of concrete and reduce slump loss. Significantly dropping the maximum temperature will contribute greatly to reducing cracks due to hydration heat in mass concrete and high strength concrete, and improve quality.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.34 no.10
• /
• pp.1572-1578
• /
• 2005

Response surface methodology was used for monitoring changes in physicochemical properties with heating condition of ginseng which was sliced and freeze-dried. As heating temperature and time increased, soluble solid content decreased and browning color increased. Also, acidic polysaccharide and total phenolics increased with the increase in heating temperature and time. Heating condition for maximum soluble solid content was 146.05$^{\circ}C$ in heating temperature and 18.16 min in heating time. Maximum value of crude saponin content was 64.40 mg/g in 160.00$^{\circ}C$ and 20.00 min. Crude saponin content was influenced by heating time but the other properties were influenced by heating temperature.

• Proceedings of the Korean Vacuum Society Conference
• /
• 1998.02a
• /
• pp.108-108
• /
• 1998

최근의 GaN에 관한 연구는 주로 MOCVD법과 MBE법이 이용되고 있으며 대부분 800¬1$\alpha$)()t 정도의 고옹에서 이루어지고 었다. 그러나 이러한 고온 성장은 GaN 성장 과청에서 질 소 vacancy를 생성시켜 광특성을 저하시키고 청색 발광충인 InGaN 화합물에 In의 유입울 어 렵게 하며 저온에서보다 탄소 오염이 증가하는 동의 문제캠을 가지고 있다. 이러한 고온 생장 의 문제점을 해결하기 위한 방법중의 한 가지로 제시되고 있는 것이 저온 성장법이다. 본 연구 에 사용된 RPE-UHVCVD법은 Nz률 rf plasma로 $\sigma$acking하여 공급함으로써 NI-h롤 질소원으 로 사용하는 고온 성장의 청우와는 다르게 온도에 크게 의존하지 고 질소원올 공급할 수 있 어 저옹 성장이 가능하였다. 기판으로는 a - Alz03($\alpha$)()1)를 사용하였고 3족원은 TEGa(triethylgallium)이며,5족원으로는 6 6-nine Nz gas를 rf plasma로 cracking하여 활성 질소원올 공급하였다 .. Nz plasma로 질화처리 를 한 sapphire 표면 위에 G따애 핵생성충을 성장 옹도(350 t, 375 t, 400 t)와 성장시간(30 분,50 분) 그리고 VIllI비(1$\alpha$)(), 2뼈)둥을 변화시키면서 성장시킨 후 GaN 에피택시충을 450 $^{\circ}C$에서 120 분 동안 성장시켰다 .. XPS(x-ray photoelectron spectroscopy), XRD(x-ray d diffraction), AFM(atomic force microscope)둥올 이용하여 표면의 조성 및 morphology 변화와 결정성을 관찰하였다. X XPS 분석 결과 질화처리를 한 sapphire 표면에는 AlN가 형성되었다는 것을 확인 할 수 있 었으며 질화처리를 한 후 G따J 핵생성충올 성장시킨 경우에 morphology 변화를 AFM으로 살 펴본 결과 표면에 facet shape의 island가 형성되었고 이러한 결파는 질화처리 과청이 facet s shape의 island 형성을 촉진시킨다는 것을 알 수 있었다. 핵생성충의 성장온도가 중가함에 따 라 island의 모양은 round shape에서 facet shape으로 변화하였다. 이러한 표면의 morphology 변화와 GaN 에피택시충의 결정성과의 관계를 살펴보면 GaN 에피택시충 표면의 rms(root m mean square) roughness가 중가하는 경 우 XRD (j -rocking curve의 FWHM(full width half m maximum) 값이 감소하는 것으로 나타났다. 이러한 현상은 결정성의 향상이 columnar 성장과 관계가 었다는 것올 알 수 있었다 .. columnar 성장은 결함의 밀도가 낮은 column의 형생과 G GaN 에피택시충의 웅력 제거로 인해 G값{의 결정성을 향상시킬 수 있는 것으로 생각된다. 톡 히 고온 성장의 경우와는 달리 rms roughness의 중가가 100-150 A청도로 명탄한 표면올 유 지하면서 결정성을 향상시킬 수 있었다. 본 실험에서는 핵생성충올 375 t에서 30 분 생장시킨 경우에 hexagonal 모양의 island로 columnar 성장을 하였고 GaN 에피태시충의 결정성도 가장 향상되었다 이상의 결과로부터 RPE-UHVCVD법용 이용한 GaN 저온 성장에서도 GaN의 결청성올 향 상시킬 수 있음융 확인할 수 있었다.